Mastering the Proshine Max V Shuffling and Dealing Machine: A Comprehensive Guide

[@3b1g4k]

How do you change the batteries in the remotes?

[@proshine_official]

To replace the battery in your remote control, first, remove the sticker on the back. Next, use a screwdriver to unscrew the two screws securing the back cover. After replacing the old battery, reattach the cover and secure it by tightening the screws.

[@jimjojohnson]

I recently purchased your shuffling/dealing machine and am very pleased with its functionality. I’ve been experimenting with setting it up for Texas Hold’em and have figured out a basic process: 1. Select the number of players. 2. Deal two cards to each player. 3. Deal four community cards (one as the burn card and three as the flop). 4. Use the up or down arrow for the next burn card and the turn. 5. Repeat the up or down arrow for the final burn card and the river. This method works ok for dealing a single hand. However, I’d like to know if there is a way to configure the machine so it automatically shifts the dealer position one spot to the left for the next hand, as is standard in Texas Hold’em. I know I can hold down the dice key and pick which position I would like it to deal to next. Is there a way to make it do it automatically? Thank you for your help, and I look forward to hearing back from you.

[@proshine_official]

Thank you for your feedback regarding the shuffling and dealing machine. I would like to clarify that if you have the non-remote version, automatic shifting of the dealer position is unfortunately not possible. For the remote version, you can pre-pair up to four remotes, allowing you to deal cards selectively after the community cards. Should you require additional remotes, please do not hesitate to contact us at [e-mail]. We appreciate your inquiry and look forward to assisting you further.

[@MatheusSantosSD]

mine is not working. for example, if i set it to 3 players and 2 cards, it starts dealing multiple cards, for example: player 1 = 3 cards, player 2 = 8 cards. has anyone had this problem?

[@proshine_official]

Thank you for bringing this issue to our attention. We apologize for the inconvenience you're experiencing with our product. Should you require further assistance, please feel free to reach out to us at [e-mail]. We are here to help you.

[@DangNgocPhu]

How to setting this machine for poker? Can you show me how to setting on this machine ? Thank you. Btw: what is the "bottom" using for ?

[@proshine_official]

The "bottom" is used for the hole cards. This video shows the machine's various mode settings that can enhance your experience in different types of poker games. Hope this is useful🥰

[@dwdrum1]

Cool machine. Bought one off Amazon. But man, the instructions are absolutely horrible This video helped a bit

[@proshine_official]

​@@dwdrum1 Happy to hear that it can be of assistance

[@trevoreckert9807]

Can the dealer speed be adjusted? It was dealing faster but had now slowed down. It doesn't throw as far or as fast as it was. Battery is fully charged. Thanks

[@proshine_official]

Thank you for your inquiry. Unfortunately, the dealer speed cannot be adjusted. It is common for the dealing speed to decrease with extended use. If you find that the speed is significantly slower than normal, please send a video to our customer support email at [e-mail]. Our team will assess the situation and determine if there is a malfunction.

[@kevingrahamelliott4995]

Can shuffle and deal cards with sleeves?

[@proshine_official]

It is advisable not to use sleeves, as the thickness may impede the functionality of the card shuffling and dealing machine.

[@briansiessel]

Is there a way to shuffle multiple times and then deal?

[@proshine_official]

Unfortunately, this dealing machine does not support automatic multiple shuffles. However, you can manually remove the shuffled cards from the tray, place them on either side of the machine, and shuffle them again as needed.

[@ShinJaeuk]

What is card warehouse sensor setting?

[@proshine_official]

This function is primarily designed to prevent some dark cards from being undetectable. Disabling this function will not affect its use.

[@danielkostenko512]

This is very true. I have noticed the sensor for shuffler function does not detect “dark colored” cards. You must use lighter colored cards

[@nancyjohnson8386]

How to change language

[@proshine_official]

To change the language, you can refer to the video at the 3:59 mark for instructions on accessing the language settings.

[@aer721]

Same problem, when I long press the settings key as noted at 3:59, I don't get a language function, everything is still in Chinese. Is there a reset button?

[@proshine_official]

​@@aer721 Thank you for your inquiry. Unfortunately, this model does not feature a direct reset option. Typically, our machines are configured with English as the default language upon shipping. If the video instructions do not lead you to the language switching interface, please consider recording a brief video of the issue and reaching out to us through alternative contact methods provided on our bio. We will be happy to assist you further with technical support.

[@DaveLudwig]

Questions about where it starts dealing. 1. Is there a way to quickly deal, starting with the next person clockwise, with every subsequent hand? 2. I don't understand why starting the dealing from a different player is limited to 3 or 4. If there are only 2 players, I'd like to alternate with the other person. 3. How to people draw from the deck during the game?

[@proshine_official]

1. To set the dealing order to clockwise, position the dealing port towards the player you want to start dealing with, then press the start button to begin. 2. If you have 2 players, you can set the number of players to 2 and choose the swing mode to alternate dealing with the other player. 3. During the game, random drawing from the deck is not supported. However, you can quickly deal a single card by briefly pressing the +/- button. Thank you for your question and we hope this helps. Please feel free to contact us if you have any other questions.

[@VishalParekh-u5e]

How can i configure the machine to deal the top cards of the cards first? I changed the setting bottom last but it still deals the bottom cards first any solution to this?

[@proshine_official]

Thank you for your inquiry. This machine's configuration only allows for dealing from the bottom, as the output slot is located there. Changing the setting to "bottom cards last" only affects the order in which the bottom cards are dealt, rather than altering the starting point of the dealing process.Unfortunately, dealing from the top isn’t feasible with this setup.

[@tonyong7526]

How to change the battery in remote control?

[@proshine_official]

To replace the battery in your remote control, first, remove the sticker on the back. Next, use a screwdriver to unscrew the two screws securing the back cover. After replacing the old battery, reattach the cover and secure it by tightening the screws.

[@sabrinnad]

@@proshine_official What type of batteries does the remotes take?

[@proshine_official]

@@sabrinnad CR2032 battery

[@sabrinnad]

@@proshine_official Thank you very much for the response. Have a good holiday season.

[@kingmo565]

On Amazon there is the Version with remote and Basic. Which one is better? what's the difference?

[@proshine_official]

These two machines are essentially the same, but the remote version comes with four remote controls, allowing four players to use it. Players can deal a card by pressing a button on the remote.

[@billngo3968]

Can you get 4 more remotes so there's up to 8 players total?

[@maricarsandiegochanel.9964]

how to setup in chinese poker 4players 13cards each continuously give until the last 52 cards hope you can help me

[@proshine_official]

Set player count to 4 (players: 4); deal 13 cards per player (cards: 13); no bottom cards (bottom: 0); one deck of cards is sufficient.

[@dakotalloyd5113]

Mine is stuck in Chinese. Is there a fix to this issue

[@proshine_official]

Thank you for your message. Could you please confirm if the device was purchased from us? For specific assistance, feel free to send us a direct message on our Facebook or Instagram page. We are here to help😊

[@AE-nm8kx]

@@proshine_officialThank you

[@chrisfoster8770]

Mine is stuck in the Chinese language setting. I must have hit the wrong button to select English when I first started the unit. Now I cannot get back to the language setting. Can you share how to factory reset the unit to be able to select the language again? Thanks!!

[@proshine_official]

You can check the video at 3:59 to learn how to set up the language.

[@TheSkyPod]

Use your cell phone , and install Google Translate . You can take pics of any language and it will translate to any language.

[@dakotalloyd5113]

Dude Mine too. Its stuck in Chinese

[@TheSkyPod]

@@dakotalloyd5113 Google translate app for your cell phone.

[@proshine_official]

@@dakotalloyd5113 If you are experiencing issues with our product, please do not hesitate to reach out to us at [e-mail] for assistance.

[@joannayuan6869]

What’s the maximum number of cards the machine can handle?

[@proshine_official]

The card machine can handle up to two decks at a time due to the card compartment's capacity. However, you can continuously replenish the decks in the compartment based on your requirements.

[@djryanc4365]

Can this be set to NOT rotate when dealing (only deal to one player like a casino dealer) and if multiple players are selected, can it be set to only deal on command (like with a button push)? I am trying to use like how a shuffle machine works at table games at a casino.

[@proshine_official]

Thank you for your inquiry. This card dealer is designed to deal to a minimum of two players and does not have the functionality to continuously deal multiple cards to a single player without rotating. While it does not skip players during the dealing process, it can be set to deal a single card to a specific player upon command. Please note that this card dealer does not come with a separate remote controller. If you are interested in this product, you can use the code 【05NWL3TG】 to avail of a limited-time discount😊

[@VishalParekh-u5e]

How can i configure the machine to deal the top cards of the cards first? I changed the setting bottom last but it still deals the bottom cards first any solution to this?

[@proshine_official]

I'm sorry that this machine cannot be configured to deal cards from the top🥲