Mastering The Xtool S1 Conveyer - Easier Than You Think!

[@carriemyslinski4521]

Thank you! Thank you! Thank you! I could not find anyone else on KZbin who demonstrated cutting with the conveyer.

[@ashleefalco]

GLAD I COULD HELP! ❤️❤️❤️

[@purplecookie687]

We plugged ours in but the feeder doesn't it won't roll the wood in or move at all.

[@Linneydenise]

Thank you. Do you have a video for HOW to put the conveyor together(install/setup) step by step?

[@ashleefalco]

TBH, I would go to the xtool website and watch their how to video no how to assemble it all. It's kind of a PIA LOL

[@Linneydenise]

@@ashleefalco No luck, went there already before I asked you if you have a video. This company is good for hype and flash but very messy and untidy on the steps/step by step details for installation. You mentioned that xtool does a great job with illustrating? NO they dont. There are several steps left out before the subsequent step."Arrows " dont tell you anything when there are multiple steps within that step and the next step, before moving on. There 's a new xtool design space and the steps you display here are 50% obsolete. The newbie will get lost after you say "now lets go to the computer..." when you pull up design space because it has been upgraded there is no right side panel that just appear, you have type in a text/object before it appears. There are other steps you mention here, that is located elsewhere on design space like "automatic measurement" its found at the top, not in a drop down menu. These HORRIBLE instructions/illustrations in their manual only cause more confusion and more work for the customer. Took me 4 hours to put the conveyor together and the "blocks" never did unscrew and that littlie tiny metal device never turned to lock in place, so the blocks are just sitting under each conveyor rail. A straight nightmare and HUGE waste time

[@ashleefalco]

@@Linneydenise strange. I went to there website and looked up the guide and that's how I was able to assemble mind with zero issues. I cannot control in xtool updates their software and changes where buttons are placed which is why I narrate what button I press. Because at the end of the day the button will always be there (may be in a different location but it's there). Hope you find success with someone elses video.

[@Linneydenise]

@@ashleefalco No one has a video on the install, like you dont, because its too complicated and it doenst follow the manual. As you said, you had to discover on your own where that cord was, the manual doesnt mention it, nor show you where to connect it. Click other people videos for what? The best most helpful part is left out, intentionally.

[@Linneydenise]

Take Care

[@brodiethomas6315]

Should you have used “tab generation”? Mostly curious because the pieces that fell out of our cut caught on the rails and pushed the wood out of alignment.

[@ashleefalco]

If you had that issue, I would suggest using tab generation - don’t do a whole lot of them though, because then it’ll be a pain to get those pieces out.

[@brodiethomas6315]

@@ashleefalcoI know. It is a pain. I’m thinking it’s only an issue on our thinner material. Thanks for the response :-)

[@cayeleonard6284]

Great video! What is the table that you are using?

[@ashleefalco]

I have a ton of these tables: amzn.to/4fbl2Xa

[@cayeleonard6284]

@@ashleefalco Thank you!

[@ImproMooray]

Do they use these for Laser engravings?

[@ashleefalco]

use what for laser engravings?

[@ImproMooray]

This laser cutter @@ashleefalco people usually prefer making a binary image out of a regular Image to do laser engravings. I was looking into it and that was how I was able to find your channel.

[@jmon1334]

Thanks for the video my riser and conveyor will be here tomorrow!! yeah me ! and you have a P2 WHY would you want a Diode? The P2 does Everything! And it has its own conveyor version as well. And the glowforge is web based.

[@ashleefalco]

Yay! Happy crafting! P.s. diode lasers although don’t cut all acrylics, do other cool things that a co2 can’t ❤️

[@jmon1334]

@@ashleefalco CO2 does everything

[@ashleefalco]

@@jmon1334 that is very untrue.

[@franciscoresendiz813]

that's not 1/4 of an inch that's half not actually but very close

[@ashleefalco]

Thanks for watching