How To Change The Starter On A 2010 Chrysler Town & Country | Step By Step Start To Finish

[@TARWERG]

Good job man . i don't know why you have more room for the starter

[@kaishabrown87]

Right I have the same exact year van and mine doesn’t have that much room in the front. Underneath I have a lot tho

[@ToolswithSoAlz]

Dad used to bypass the starter by using a long handle screwdriver. Years later I used this same trick to hotwire my lawnmower when the solenoid went bad.

[@bobpaulino4714]

Can't get to the solenoid on this one. Old Ford's had the solenoid on the fender well. Common sense went out the window ---

[@jduasvte2436]

Great job 👍 you lucked out with the starter being up front and the wiring pretty accessible. Working on your car is therapeutic (when everything goes as plan) 😂

[@MasteringMayhem]

Yes, when it goes as planned. Otherwise it just reminds me why I never became a mechanic 🙂✌️❤️

[@rodw]

VERY NICELY DONE MY FRIEND !!! BROUGHT BACK A FEW MEMORIES OF THE FIRST TIME I HAD TO CHANGE MY STARTER. USED AN OLD CHILTON BOOK. THANKS FOR SHARING YOUR THOUGHTS AND VIDEOS RODNEY

[@SQUIDX1973]

Thanks for the share. I love to fix my 2010 Chrysler town and country 4.0. I didn't know if I could fix my starter. But now I know. So, Thanks again. You did a great job 👏 👍 🙌 👌.

[@frankenpickle1923]

It’s nice that when you see a teachable moment you use it! Ty so many benefit from these helpful videos!! Your all in his good graces!! God bless!!

[@scottiepimpin6960]

You’re a life saver bro!!!!!! Thank you so much

[@jaclynfusco3127]

Did you use a standard jack? Or is the van on a lift?

[@brandonslechta2510]

Hi. I was just quoted $780 to replace the starter on my 2010 town and country. How long do you think this took you from start to finish?

[@MasteringMayhem]

With filming the video it took me about an hour and a half. I’d say it’s an hour job give or take if you have all the tools. Let me know if you end up doing it yourself. 🙂✌️❤️

[@tylerhenry3665]

Good job on installing the new starter

[@Joethetoolguy]

Hell yeah 🚗 I am so in for this bro! Put a turbo in!

[@MasteringMayhem]

Shoot…the van can barely handle premium 92 gasoline, the turbo would finish it 🤯

[@ToolswithSoAlz]

If it can't handle a Turbo, your only alternative is to go with NOS.

[@2DJeff_3DPrinting]

Great video! Thanks for sharing. I have a 2008 Grand Caravan. If I ever need to change my starter, I'll refer to this video. It gives a great since of accomplishment doing stuff on your own, huh?!

[@MasteringMayhem]

It does 🙂✌️❤️

[@dougthomasmusic]

Awesome job brother. You really helped me out here. Funny thing was, one of the hardest parts of this was finding where that dogon thing was. 😄 you gave me the encouragement I needed. Saved me a lot of cash. The other was that with that craftsman twist action ratchet, it saves you from having to take the front fans and cowling off. I owe you a beer! Take care. 🏖🎶🎸🦜

[@MasteringMayhem]

I’ll take you up on that beer. Very glad to have helped with this video. I hope you and yours are well 🙂✌️❤️

[@paulpetry3675]

Congrts! you are now an official "Car guy/mechanic"

[@kaleturney5043]

Super helpful, my guy. Thanks!

[@ToolswithSoAlz]

Did you ever wish you had the 12v Husky ratchet?

[@MasteringMayhem]

Yes 🙂

[@davidhudson1290]

Wouldn't fit.

[@eastcoastgalshea6501]

We changed starter it started and now won't do anything!! Any ideas as to why

[@ernestoserr3885]

I´m not a mechanic expert but this is useful ,,, now I know how to change a starter ,,, thanks !!!

[@MasteringMayhem]

You bet. I’m a DIY’er and definitely not a pro. Just had to do it to save some money 🙂✌️❤️

[@nerdymra8252]

Was anyone else wishing that they had the wood paneled Town & Country 😁 Marius, you definitely mastered the mayhem, or maybe edited out, the swearing that makes any car fix move forward. 🤓👍

[@MasteringMayhem]

I any recall if I swore any during this adventure but I definitely recall the frustration during some parts of the change out 🙂✌️❤️

[@eduardohuerta7559]

The small wire is the signal wire the bigger one is constant battery power. The ground is achieved by the bolts and starter up against the engine because the engine is grounded

[@cherylhettich639]

Great video thank you!!!!! Sure wish i had your double racketing socket wrench!!

[@kMaxRx]

Is this the 3.3 or 3.6 or 3.8 or 4.0?

[@MasteringMayhem]

We sold it a while back but from what I remember it was the 3.6

[@kMaxRx]

Thanks, I got the 4.0@@MasteringMayhem

[@MecanicoChicago]

What's the name of that ratchet?? I need it!!

[@MasteringMayhem]

Craftsman rotating/rotator ratchet: amzn.to/3J5qgVw Stanley has one too: amzn.to/3J8fL3Z

[@JoseInSeptember]

Good job. I'm no mechanic but sounds like maybe you have some noise coming from a bad pulley. I need to find me that craftsman ratchet.

[@MasteringMayhem]

It’s a very nice ratchet. Comes in handy for sure.

[@wolfparty4234]

Very helpful Bro!!!! Thank you for sharing!!!💪🏼🔥🔥🔥👍🏻

[@MasteringMayhem]

You’re welcome. Thanks for supporting the channel 🙂✌️❤️

[@Crzgrape]

Did he ever mention what size engine that is

[@tyronevonchadley]

Looks like the 3.8l

[@Crzgrape]

@@tyronevonchadley I know what it looks like. Did he ever mention what size engine that is

[@trentwilliams4453]

Great job !!!!! See you tomorrow night

[@MasteringMayhem]

Thank you. Tomorrow night is gonna be lit 🔥 🙂✌️❤️

[@TARWERG]

Good 🎥 brother thank you

[@paulpetry3675]

Great video, my biggest fear s bad starter when on long trip. - but try to keep camera from moving around too much, makes me sea sick all over again

[@thelegendarywasdgamer9724]

Lol bro he's working on a car. Stop being a wuss.

[@trentwilliams4453]

That horn scared you a lil there at the end lol

[@MasteringMayhem]

Yes it did, forgot what to expect when I reconnected the battery 🙂✌️❤️

[@kevinrutigliano9707]

You sound like me! Best video ever!

[@TheGeno2001h]

What was the thing you broke?

[@tjo8673]

Great job!

[@k-nutl6386]

Nicely done

[@edwardkauth5625]

Good video

[@Gatita-Oso]

I would not even know where to begin on any kind of auto repair!!

[@SpookeyTIME]

Good job

[@benjcanlas3530]

Tools for my dad pls

[@steve8956]

I'll let ya know when I get it back on. God I hope it works. I'm kinds of stuck 5 hrs from home am had to work to cash job's to buy my starter. My phone is off already so it map's and rd signs home 😝

[@joecorreia1146]

Not a gasket, Its a shim

[@DeathbringerDrago]

You also Removed a part of your exhaust without mentioning it.

[@DailyCultureWar]

yeah that was kind of aggravating

[@perropulgas25]

👍

[@konamanstudio2447]

👍🏻🍻🍺🤙🏼

[@cherylhettich639]

Great video thank you!!!!! Sure wish i had your double racketing socket wrench!!