How To: Frame a 16" O.C. Wall! (Most Common Wood Framing Method)

[@MBW]

Need it in Spanish? ¿Lo necesitas en español? Here it is! ¡Aquí está! Spanish: kzbin.info/www/bejne/j32lhHeAi66MbbM

[@MattBangsWood]

Our team at MattBangsWood is always looking to help the industry, no matter what it takes! We had a lot of requests for Spanish speaking content, so we found a way to make it all possible.. Click the link above to watch this video fully in Spanish. Just a step for us in making sure we're providing the best possible learning experience online.

[@SteveRoss]

@@MattBangsWood Well done with this BTW!

[@jameshosteen4790]

@@MattBangsWood ,

[@dgamersnation1874]

Gracias. Even if I know english, this type of information I get it better in spanish

[@davisonprouty2282]

​@@SteveRoss977😅

[@Austin_SOLDanoRealEstate]

My Uncle has been framing since he was 15 and is now in his 60's... he put me onto your channel and learning a shit ton. Thanks dude!

[@scottseymour2153]

What a down to earth, simple, clear-cut, an spoft spoken dude. Awesome channel and work

[@madpennfoodchannel7501]

Yes👍

[@h2oskier32]

I'm stoked that smart young men like this are working in the trades...his Dad has taught him well....I've been a contractor in CA for over 20 years and worked with many awesome large and small crews (commercial and residential)...from what I see in these videos....this young man is an excellent carpenter, knowledgeable and has been taught correctly. He would out frame most of the men I have worked with...and could hang with my crew any day. I came to this site to find an online source to help train my boys who are 14 and 15 and interested in the trades....and subsequently learned a few things myself....you're a fool if you think can't learn from others...young or old. Keep up the good work Matt! ......and ignore the negative comments from the losers who are sitting on the couch during the workday wishing they had your attitude and skill set.

[@MattBangsWood]

Appreciate this greatly! Whereabouts in CA are you from? I was taught very well, and wanted to be able to do the same for others.. Which was my whole purpose behind these videos, and it’s shown that people are learning from them! Once again, thank you. 🤘

[@h2oskier32]

@@MattBangsWood NorCal near Sac...worked in the Bay area before that. I'm trying to slow my pace a bit...I now build about 1 or 2 custom 2000-2500 sf specs a year with a small crew and do all phases of the construction from site work-------finish... but I sub the drywall..insulation...stucco. It's not the fastest, most efficient or cheapest way to build....but I really enjoy handling the whole project. I always tell new guys ....A positive attitude is what makes this profession...professional! A negative work environment is TOXIC! Always be learning, respect the other trades and keep your work clean.

[@coreyj.7776]

@@h2oskier32 not the cheapest? I thought it would be cheaper with a small crew and doing everything your self. How long does it take you to close it in? I'm thinking of building a spec house next year doing most of the work with my small crew. Site work - finish. Im a carpenter by trade. Throw some advice my way

[@h2oskier32]

@@coreyj.7776 The first thing to consider is if you are borrowing money or working with cash. If you are working with a loan...the interest clock is your biggest enemy. You need to calculate the time it's going to take you to get it to the finish line so you can either sell or refinance the loan into a more reasonable rate. Spec loans typically have higher rates, more fees and are interest only. Doing all the work means you miss the opportunity to have subs handling work simultaneously while you work (ie...plumbing, electrical, HVAC while you're finishing up framing or setting window or roofing. This adds weeks, which equals more interest. With the added interest and labor, it may be more cost-effective to sub out. I haven't been happy with subs the last few years, so I choose to handle the majority of it. Reduces my stress, so I am happy to forego some potential cost and time savings. A good sub is valuable, so if you find a few...this will make the spec go smooth for you. I just started the site work for my next one (2300 sf-custom modern farmhouse with a better than average finish) I set a budget and goal to have the home ready for market (turn-key with landscaping, driveway, concrete porch and patio), in 27 weeks. Crew of 3 (Me, one journeyman and and a laborer). I only plan to sub out fire sprinklers, drywall, insulation, electrical, some stucco. i'll let you know if I hit my goal. Good luck!

[@coreyj.7776]

@@h2oskier32 Thanks man I really appreciate the advice. Good luck on your house. 27 weeks.. You rock

[@steve6429]

This is the simplest, easiest to understand and most well explained video I've seen on framing so far. Thank you!

[@austinmaxey6602]

I couldn’t agree more

[@chaddmeerbergen9169]

Matt, I am the carpentry instructor at a vocational high school In Massachusetts. I stumbled on to your videos a couple of weeks ago while doing research for on line education. Covid19 has brought school to a standstill so I am doing my best to keep the students engaged as they trudge through a state wide quarantine. I just wanted to say that your youth has been a real draw for the students. I am also happy to see that you have high standards ( your work is your signature). Keep up the good work. I will be using more of your videos as supplemental demonstration material..

[@sirisaacnewton3305]

I got a question so when those students graduate what will they be like a construction manager or a laborer

[@nobodyknew]

I'm a laborer, just started in the trade, and saved up and purchased my first tool set with the hopes of improving my use around the jobsite. I decided to look up how to frame and came across this video first. When I compare what I have seen in the past 3 months to the amount of knowledge and respect in this video alone, I am inspired as hell to someday work with a team of people like you. Thank you for the great video, leadership and for providing an example of excellence to which I can aspire. Cheers man! Subbed, and on to the next video... I'll remember, "Think about other trades" and "my work is my signature."

[@royalt3103]

You should talk to one of the licensed carpenters on site and see if they will take you on as an apprentice!

[@TheRealIndridCold]

Did you get the job?

[@Mantis858585]

If you want to think about other trades, forget about adding all those blocks. 😆

[@stevepepin74]

This is the first video I’ve seen of yours. I have to tell you I’ve been in the trades for years as a carpenter. I always thought it would be odd to watch someone do what I’ve done for so many years. But man you tell so many good points. It was awesome to watch your video. I think you would be awesome as a teacher of the trade! Great Video!

[@isabelhuerta7577]

I love this video this guy knows his job well good describing how to make a wall look so simple great teaching very honest..

[@TheJoefussGarage]

I'm a career HVAC guy.. You brought a tear to my eye, with the "think about other trades" comment!!! 😉 It's a treat, to watch any trade craftsman at work....

[@ernieforrest7218]

Nice to see a young man knowing the proper way of framing without wasting material.

[@jamesfrady272]

Grew up helping my Pop build and remodel houses. Had my general contractor's license for around 15 years. Didn't do much building because I had a high-paying and good benefit job otherwise, so I finally let them go. This is the first time I had ever been shown the California Corner. I have not seen this used here in NC but I'm watching this to refresh my memory for a basement project. You're never too old to learn..

[@cookinitmax]

I’m 56 just getting into this trade thanks I’ve been told it’s never to late but it is if your not learning the correct way to do things. So I thank you for taking your time to show us who don’t know this trade . I’m sure from what I see and hear everyone has the right way.

[@Jjz344]

42 and also about to start this now good to know I’m not alone in this

[@TheMattward1]

You know how to tell when someone really knows what they are doing? They can explain it so anyone can understand. I'm framing a wall for a shed, my first, and you are making it easy for me. Thank You!

[@juliaeaves8306]

They say if you can't explain it clearly to a 5 year old. Then you dont truly understand it.

[@AngryBengry]

“Your work is your signature” - you got a new subscriber

[@irisgg858]

At first i was like cheesy but then i was like damn thats a bad ass quote.

[@steveharrington118]

And me for this another subscriber. Good job bro.

[@PossumMedic]

Amen! :D

[@rkalla]

Yup - see here.

[@Stallion23]

Same here. Subscribed! That comment made me smile. A good quote to live by.

[@glendumond5890]

wow your very smart on those type of corners thats how a guy taught me . most crazy people think they have to use 3 pieces with short blocks , glad too see someone else teaching things the better way , great job

[@markaddis84]

I’m a drywall hanger and let me tell you I greatly appreciate good framing. Same as you, I take pride in my work and do my best to hang so it won’t create more work for finishers. Well done bud!

[@DevinSheaProductions]

Now they have robots that can hang drywall. I wonder how they would program robots to adapt to bad framers. “Does not compute” lol

[@Eugene_Connor]

Mark Love to hear people say they take pride in their work, and think of the people that come behind to do finishing. Good job.

[@dfarr6518]

And as a painter I love good drywallers lol 😂

[@kendrickthomas7881]

Retired from the military 2 years ago, decided to leave my LEO career for something fun, and decided to shift gears and get back to doing what I did in high school...building things with wood. Currently in a building and construction trade program at the local college here in TX and taking in as much info as I can. Came across this video (about to install a wall in my garage to block off the 3rd car side for a workshop), watched it, and am thoroughly impressed by the attention to detail. Subscribed today and looking forward to watching and learning more...excellent work!

[@ScentArmor_MikeJr]

"Think about other trades." "Your work is your signature." - hired.

[@HPSFRoadrunner]

Everyone wants this type of quality, nobody wants to pay for it.

[@MattBangsWood]

@@HPSFRoadrunner KZbin has given me the ability to show our quality while guaranteeing clients / builders can be satisfied.. It's a beautiful thing. Similar to a portfolio, expect in video form, and with a half dozen builds.

[@MattBangsWood]

@@rkalla 100% agree with you.

[@HPSFRoadrunner]

@@MattBangsWood I'm glad you are taking the time to teach the next generation to do quality work.

[@OhioTruPatriot]

i heard that and was seriously impressed.........

[@HvyMetal4Ever]

My wife and I just were discussing about building a home not 1 hour ago. I come home and see this video in my recommend. I can say with great conviction that I would be proud to have you framing our house. Your attention to detail is next level. My favorite part about this whole video is the comment you made about looking out for your fellow trades. So many people get hung up on doing the job and moving on, that they never take other trades into consideration. Very well done!

[@stephenbonin3049]

Don’t be surprised your phone is always listening to you.

[@markpierce6902]

I've made a late life decision to become a carpenter. Matt has inspired me beyond belief. Thank you Matt for your inspiration and for inspiring today's youth to excel in the trades!!! You are awesome!!!

[@chrisalister2297]

What age and how's it going since you started?

[@emeraldfox7175]

Lol son,it takes a lot of years of experience to be considered a Carpenter and not a nail wagger

[@ashleam1489]

I love the perfection and attention to detail. I can't stand sloppy. I'm a middle-aged woman building my own shed (pretty much on my own) and I'm extremely picky about square corners, efficiency, using good materials, and a bit of overkill when building- for snow loads and longevity. I really appreciate this video. You're a real pro and I would hire you in a heartbeat.

[@johneroyale]

I'm also here because I want to build my own man cave shed. Thanks for sharing your knowledge and expertise.

[@MythicAce218]

this is just how its supposed to be. im a kid(17) going into the trade once i graduate Hs,looked up this vid because i forgot the beginning measurements since i did that in September. the amount of people who don't do 16 on center surprises me makes it 10 times harder to fix something/put something on a wall etc

[@maNki89]

зачем вам такая надежность? вы все равно умрете и дети не будут жить в вашем доме. они снесут его и построят под себя

[@VinhNguyen-wz9lu]

"Your work is your signature" - is nice said! It's great to learn from the pro! thanks for walking step by step and sharing tips. Well done.

[@austinmaxey6602]

Man what a awesome video. I’m a plumber and what you said about getting pipe through the top plate man oh my lord I can’t tell you how frustrating it is that framers don’t think about the plumber. I ruin bits all the time cause even if you look the nails are still in there and you can’t see them. I’m wanting to learn more about framing I want to be able to do everything. This video was great man and very well instructed!

[@adnanchowdhury43]

“Your work is your signature” I love it. A man of honor.

[@karchata7123]

What i like most about this, besides it being laid out to understand easily, is how proud he is of the work that he does. I love to see people who care about the job they do!!!

[@randycantu1]

You're teaching this old man some tricks. Thank you!

[@angelsandfaes]

If all your other videos are like this one - great info, easy instructions to follow, and not a bunch of extra talk that doesn’t help do anything but confuse or overwhelm, you are the king. Thank you.

[@JoeJoe-wp1vv]

Yay I built my 1st wall, now I need to build my house around the wall😂😂

[@timothybailey5562]

You can do it. I've been around building enough that I refuse to buy

[@maddmann4931]

Hahahahahahhahah🤣🤣

[@aliinarousu]

hahaha 😂

[@JG-or9ej]

If you can build a wall you can build a house…

[@jkpaschal]

Great vid Matt! Another way to do the blocking: run a line @ 4ft. then just alternate sides with your blocking. It gives you room to face nail into end grain on both sides and you only needs to run 1 line. Just another of the hundred ways to do this stuff, like you said, a signature. Love your work, keep it up!

[@marine9583]

I've framed a house or three in my day. A few suggestions. At 2:45, might want use a whole 2x4 for your corner stud, especially in a video of framing a wall. When measuring the top plate, when you come to a corner and there will be a 2x4 wall intersecting, you may want to hold the top plate back 3 3/4" from flush so the future wall has an area for its top plate to overlap and fasten to for strength. Also when the end of the wall is a single stud, it helps to let the top plate hang over the lower plate by 3 1/4" to connect to the plate above a corner or wall lead. Pre cuts are usually 92 5/8". After 3 plates, deducting for drywall and flooring, you have roughly 8 feet ceilings. Besides for that, looks good. And thank you for mentioning keeping hands away from nailing areas. I even go as far as shooting the lower nail first, then pulling my fully away to shoot the top nail. Moving fast with framing, the weight of the nail gun, and occasionally getting just a tad sloppy from the monotony of it, that top nail sometimes hits just a tad too high and skips above the board. If your hand is right there 8" away, well, you my have a little pain right quick.

[@FullAssurance]

Very important and noteworthy suggestions here, especially overlaps / shortage of top plate for strength of corners. Your experience with numerous projects certainly shines through.

[@evaneason6906]

I was wondering how he locks the top plate corners together.

[@robertfaulkner2624]

But... this is by far the best way to frame ;)

[@jacobramos4039]

The wall that he’s building could possibly be a stand alone wall with no intersecting walls connected to it. And I think this video was to kick things off with just the basics of framing a wall. How to tie walls together and building channels is in the next video lol

[@oneslow6.018]

I’m a commercial electrician trying to gain enough knowledge in framing to frame off rooms in my barn. This video was incredibly helpful and gets right to the chase, no bullshit!

[@AndrewJ1313]

I watched several videos on this subject and this dude, by far, offers the best how to. Several of the older tradesman show you great ways to save some time, if you're experienced, but your average DIYer should use this as their tutorial.

[@MattBangsWood]

I’m glad to hear that. The goal for this was to teach literally anyone how to put a wall together!

[@Melanatedtribe]

This is One of the best detailed on how to build channel i seen, all praises to the Most High

[@David-excellent]

It is obvious that you take pride in your work as a professional framer. You have done an excellent job in explaining framing techniques in a simple way to novices like me. Keep up with the great videos we are paying attention. 👍

[@thomasreed181]

Your work is your signature. Amen! This framed wall won’t be seen but knowing that the quality is there is pride in your work. Great video young man!

[@patbrennan6572]

He makes it so easy to understand, thanks young fella.

[@williamdarby8778]

Young man, thank you for such a great video. I helped my dad frame houses. I started when I was 13. You are a great carpenter

[@davidrivera390]

Helped my buddy with some work on his basement and got a crash course on rough framing but now have a much better understanding and how to use my tools and materials efficiently. Keep it up.

[@usmcgysgts]

Nice job young man. I mean that in the most respectful way. I haven't framed a wall in 30 years and I think that I have just found my refresher!

[@TheWarpartyofone]

My friend, when you suggested to nail over the studs, a tear formed, that was awesome from an electrician I say thank you! I'm gonna educate framers for now until I die!

[@texastitan2547]

You do not shoot a nail directly above another nail when nailing your top plate. You shoot to the side (edge)of the stud. Either side doesn't matter. That way you don't have a "blow back" and possibly getting hurt. Doing this avoids conflict with the other trades and you don't put yourself or anyone else watching in harm's way.

[@texastitan2547]

@@ivor7407 I'll be honest though. I learnt that about 10 yrs ago when I was 23. And your the only person since then that I've heard that does that. So, your definitely a conscientious framer. Keep up the good work brother.

[@TamaraNugent229]

This is the most clear and easily understandable video.... due to build a wall in a few months...... I'll try to update!

[@geoff4022]

10/10 for this video. I've been looking for a video that explains framing as simply as this. Thank you.

[@jbbj9720]

find a better video. this guy is slower than death and tells you to do things that are simply a waste of time.

[@PamelaBrandonChromeFoto]

I’m really impressed that a person so young is so knowledgeable and great at explaining the process, so thank you Sir.

[@miaciazynski2160]

I’m no framer but I am an OCD DIYer (haha), and I must say, your explanation and reasoning was perfection. I’ve seen many videos on “how to…” for so many things and I wish I could find one of you for each trade of construction. I appreciate the time and effort you put into your work as well as what was put I to making this video.

[@charlesgraham9954]

3rd generation framer from SoCal, i have family in one form or another of construction, concrete and brick laying. my son is 21 and would have made 4th gen, hes into computers. i dont blame him. thank u for ur time making this video sir.

[@sk8rXkids]

I love that you say,”Your work is your signature” well said!

[@JayshaunPatty-wf8pq]

Thank you for making this video. As a beginner carpenter I found this very helpful as you explained easily and great camera angles. Great video man, keep em coming!

[@georgesanchez9971]

Matt, I am very happy to see that young professionals like you are improving the building techniques from old-timers like me. Please keep up with your videos. I truly hope that more people get good training in this dynamic industry.

[@bandit7519]

Matt I like your videos I been doing carpentry frame to finish for over 20 years and I never saw anyone just lay out the center like you said they did back in day never even heard of that before i lay out like you do hook end of plat and mark 3/4 back from 16 mark. But what I know they use to do what I was first taught to do was mark 15 3/4 set a nail on that mark then hook your tape then mark 16 with x ahead that how it was in the late 90 s when I first started doing carpentry then couple years after that around like 2000 we started doing the 3/4 back from the 16 mark but I never heard or seen someone just hook the end of plate and lay out your center mark

[@vzgsxr]

I'm a carpenter from Australia, I nail my blocking at 1200mm (4ft) for a 2400mm (8ft) tall wall. But I only chalk one line then stagger them - one above and one below the line. Saves you marking the second line.

[@jep3582]

I’m a carpenter from California. I learned the same method blocking as you. I frame the same way as this young man as well. Good video!

[@LynxSwe]

Same here in Sweden , only marking one side of the stud and a x-mark to know wich side of the line the stud goes and no need for a square to draw the lines.

[@blazeharding574]

I am not a carpenter, so I really do not know, but I was wondering why stagger the blocking by a foot? Are there any advantages/disadvantages for hanging the drywall, installing the insulation, electrical, plumbing, etc?

[@robertdunn7913]

@@blazeharding574 2×4's are not perfectly the same width so when you put the blocking at 4' it throws off your recessed joints even if you stagger them the reason for putting them at 3'6" and 4'6" from a 20 year drywall finisher

[@TheJoshuadavis73]

Same here anything over 2700mm two rows of blocking or noggins

[@davidcastiglione3745]

Your explanations and demonstrations are a treasure for us home amateurs, thank you I feel confident to proceed

[@Z-Bart]

Matt, I've been a licensed plumber since 1986. You were probably born around 1998. ?? Thanks for the shout-out about looking out for the other trades that follow you. My motto has always been, "how would I do it if it was mine". You build with that in mind.

[@MattBangsWood]

Ray, I was born in ‘96. You were close! I was always taught to frame with others in mind, i was surprised how many people don’t nail over their studs.. I like your motto! I’ll have to remember that one.

[@Z-Bart]

@@MattBangsWood Right on Matt!

[@dmitchellhomes]

@@MattBangsWood Have you ever looked at structural engineering notes? Most structural engineers want the top plates nailed at the studs and in between for a typical 4' plate overlap. Also if you had been framing more than a week you would know nailing directly over the lower plate nails you will hit the nail heads quite often causing gun jams, and sometimes even a broken driver. Unfortunately for the plumbers there is just no winning, and todays houses with all of the straps and hardware there is really not too many safe places to drill.

[@MattBangsWood]

@@dmitchellhomes Thanks for taking the time to respond David, means a lot! Structural engineers call out for top plate nailing to be bulked up where your first top plate splits, 18 (16D's) both sides of the break. Sure, don't bore a hole through there or you'll be screwed. To answer your other question, yes, you want to nail over your studs on top plate again. The chances of you hitting a nail underneath is 1/5,000. Want to know what happens when that does happen? It pushes the other nail, it wont break the gun, let's not be so dramatic here. I've rebuilt more guns than most people have ever fired, but thanks for the "framing for a week" comment, that was a nice stab at my age.

[@Rlc420]

@@dmitchellhomes Oh snap! Looks like jr. knows what he's talking about. Maybe he's been framing for 2 weeks🤣 well played matt

[@BBoyGi0]

This is the video to watch to frame. Straight to the point and tips and tricks. Thanks

[@jenoyestewart1516]

Although in Jamaica we don't do board houses as a norm, I am loving your clear explanations and I'm learning about a trade I am fascinated with. I had to subscribe. Keep putting out content like this.

[@williamlawrence8150]

I have to tell you, I’m trying to build my own house. DIYer ! And of all the videos I’ve watched for various things yours has been the best by far! Thanks

[@darrellroireau4061]

Wow you just helped me understand making a wall easily! And now I know why the numbers on the measuring tape are red, to mark studs quickly! Had no idea and I'm in my 40's lol. Cheers Bro!

[@normanwilson8246]

No o

[@igotchabrothaofficial]

one of the best "to the point" videos I have ever seen. Great instructions bro!

[@darrin.jahnel]

"Your work is your signature" = gem

[@travis8106]

That tip on helping save bits for your plumbers was really good. I'm new to construction and learning something new every day, but "think ahead" has always been the golden rule. Thanks for the video!

[@houghtonconstructioncorp.653]

Hey Matt, this is Mark from Haughton Construction Corp, I enjoyed your videos bro keep up the great work it's really informative 👍🏽

[@Rosie-jx6jo]

By far the best video I’ve since showing step by step how to frame a wall. 👍

[@nuthinbuttrubl89]

I've got a Hitachi framer. I love that thing. I bought it for one project on my house, which turned into me buying another house and I've been using it to repair roof decking and frame out walls. Expensive and heavy as hell, but an incredibly good tool.

[@josharnold4638]

His work is what I call, “good”, not just, “Good enough”, which I think is a cop out for bad. You do good work young Man! That’s a young tradesman that will go far in the wood framing trade. He could also be an excellent foreman, training journeyman.

[@jessequintero1122]

I'm impressed guy. You could teach a class. I am glad I found your video!! I'm about to venture on a back room remodel. Basically add some walls. I thank you sir. You got a new subscriber today!

[@jakenbaked87]

Bro, I bought a house while still in school and have been trying to fix it up with little money knowing absolutely nothing about framing and construction. Your videos made my renovations possible! Thank you for teaching me so much. Keep em up!!

[@suburbanhobbyist2752]

I have never seen how to frame a simple wall explained like this before. You are a great teacher! Thanks!

[@MattBangsWood]

The goal was to make it as universal as possible, so literally anyone could learn from it! Thanks for the support, as always!

[@pierremontpetit5866]

Haters will be haters, love the teaching style and hope more to come!

[@blackriflemensorganization6139]

Thank you Matt! I am planning to build a small greenhouse, and you've taught me quite a bit. Keep up the excellent work!

[@sammyfeaster3582]

Dude i am no builder, you just taught me how to do a 16'' on center. i just subscribed

[@kristenclawson5891]

This helped a ton with my first framing project - a goat house with a lean-to style roof. It's not very big so probably over-framed but I was using it as a practice mini-model to get a taste before building an actual full-size shed =D. Anyway, super helpful thank you!

[@olgakourilova9039]

Wow. Thank you. I skipped this video when I saw how young the carpenter looked. I was struggling with deciding on best practice while building my garage and when talking to my dad he sent me this link. I was so wrong to skip it. Thank you, learned more than how to frame a wall.

[@nebulouz1]

Awesome presentation! Your communication is extremely articulate, which make it very easy to digest the information. Matt, you have an amazing career ahead of you as a craftsman and educator. I’m definitely a subscriber.

[@MadRhetorik.]

I'm 28 and grew up skipping school and building houses with my dad. I was taught the old school way you showed where you only mark the 16 oc. Still very cool to see how methods have progressed and how things have advanced.

[@STistickers]

“Think about other trades” AWESOME FRAMER

[@BryanTee80]

@A Z Oh wow, I didn't think of that haha thats going to be a pain

[@lenpolidori3568]

Low voltage wiring installers nightmare!

[@JM-fo1te]

Boomers hate him

[@brandonflorica938]

@A Z An easy solution to this is to stagger your blocks on either side of the chalk line for beginners, but back nailing on an angle definitely isn't rocket science. We also set our blocks at 46-1/2" so the batts have a friction fit.

[@teraxiel]

@A Z Not sure I understand your comment. Does anything ever NEED to run horizontally through a wall at 3'6" or 4'6"? And if all the blocks were at 4' wouldn't you have the same problem with anything running at that height? On the other hand, switch and countertop electrical boxes DO NEED to be mounted at right about 4'. In California, it's pretty common to block just about everything (not literally but a lot more than required). Yes, electricians should probably just be willing to relocate the blocks but good luck getting them to; they're just going to remove them and force the framer to reset them. Easiest solution for the framer is to frame the blocks how he shows them and avoid the issue. Yes, it creates an added step for the insulators, but it won't come back on the framer. Also, I don't think I've ever seen anyone use 47" insulation. Does anyone still build homes with 8' ceilings anymore?

[@DarthSpongebob82]

A truly skilled individual that you can tell knows his craft very well and takes pride in his work. Good up the good work man!

[@SusanAnnePowerOfTruth]

Very well done video - clear spoken instructions, great progression of steps. I really appreciate the way in which you composed the video, and appreciate the way you presented the information. I LOVE the "extra" steps - we call that "Old School" caution - "Your work is your signature" AMEN to that! Will be using your instruction to do my own construction

[@Stevej2013]

Thanks Matt. I am about to build a long shed at home. For a young bloke you sure know a lot and have a great work ethic. You must have had a great teacher.

[@SkilledEddie]

When you worked in various trades for many years respecting other trades comes easy. I was a carpenter and an electrician. I will say we never marked studs like that we just put one line and a mark next to the line on the side the stud goes. When you frame large homes marking two lines like that would piss off the foreman back in the 90s time is money.

[@dipshet]

Its still that way im framing in vegas and weve been taught to not use squares to mark cuts past 6 ft

[@alk4pon3]

One line is sufficient.. experience framers don't need a double line.

[@scarroll625]

@@alk4pon3 true, but this video is about teaching new people how to frame.

[@charliegoodspeed240]

Finally a young guy with pride

[@B.r.i.a.n.1]

Giving away my dewalt cordless framer and buying the hitachi was the best money ive ever spent. I love the hitachi.

[@whut3404]

Thank you for the video learned more from you than in this video than I have From my “teachers” no shade at them just often weathered carpenters want to get the job done so they can go home

[@dnalkao3856]

you should do a video exaining framing nails, nail schedule and applications (siding, roofing, framing, etc.) Great content man! Thanks for explaining the California corner from a energy efficiency stand point. Also, Common mistakes!

[@MattBangsWood]

Common mistakes is one i've always wanted to do!

[@kseniameleshko4562]

Your work is your signature!😊What a great job you are doing!

[@ziggiesaquaticexotics8270]

That’s the same saw I’m currently using too I’m loving it so far good ol makita bit making us buy new style of battery’s

[@Menf13]

I love that type of carpentry I worked on it for a long time doing pure shopping malls and packaging very good work

[@jimmyers2543]

My wife asked me who the stud was building the wall, I told her 2x4 lol, great video Matt keep them coming.

[@MattBangsWood]

Jim Myers HAHA, that’s hilarious! 👍 Thanks for watching Jim.

[@universalphotohd]

Keep them coming I started my first framing job today and it was a good experience, these tips and techniques will definitely help me along this journey. Thanks again

[@ibrahiymghany5144]

Legend says hes really an old grandpa with more than a half century experience in not just carpentry but communication supper skills!!! Dont let his bengeman button face trick you. Lol

[@dantevaun903]

I'm watching this as an architectural drafting student and this is super helpful.

[@t-bar7143]

Great video, had never framed wood before. I was able to frame my first wall this past weekend.....keep up the good work.

[@XBKLYN]

Great vid Matt. It's refreshing to see young folks taking their profession seriously.... hopefully this inspires the next generation of conscientious tradespeople.

[@longlost8424]

Gr8 video, highly informative, well thought out, and masterfully executed.......

[@careyclark2778]

Awesome to see younger people taking pride in their work.

[@Koumondji]

A question about the double top plate: When you use that, how do you add the joining plate that connect different walls together? With your double top plate, you will have a third plate to connect the walls? Thanks for your sharing.

[@antondefense3325]

I always added top plate after all interior walls were up and plumb. Used top plate to tie walls together.

[@chrisfisher1100]

simple... you cut back the width of the framing material... 2x4 or 2x6... so a 3 1/2 cut back would allow you to connect a 2x4 wall {residential} 5 1/2 would connect a 2x6 wall... commercial....

[@FullCircleTravis]

@@antondefense3325 I would only pre-install the top plates on long walls, and then install the plates that overlap after standing.

[@cdb989]

This is what you call a master carpenter.

[@209chevymon]

Now that was a good video had a topic explained it clearly and very detailed good job

[@Wisechannel12]

Love the details and pride you inject into your work.

[@shiznaw]

Natural teacher...great disposition.

[@weerabandara5935]

Good on you buddy.Think about other trades." "Your work is your signature.". I used the same method when I lead my team in manufacturing dept.I learn that from Unilever Ltd.If you have good work ethics you have the job everyday.

[@johnhubble5373]

Great presentation, Great outcome, Done beyond professional.