E3D V6 All-Metal HotEnd System - Why You Should Be Printing With It

[@internettoughguy]

Well that was unbiased af...

[@3dPrintCreator]

Every word in this video is just true. Simply the best hot end I have ever used.

[@timothyprospero1978]

3d Print Creator hi Brian, do you think is worth replacing the original with the E3D V 6 on the Davinci Pro 1? In term of quality?

[@Thors_Garage]

Only 50% of what hes saying is what you meant to say

[@NoraFulcanelli]

It just works. Where have I heard that before?

[@frankvonthienen3862]

All my printer got a E3D V6 on first step.... one got the Chimera/Cyclops, and Titan extruders... and ever since, no probs.

[@zfotoguy71]

@1:12 you said, "this hot end does not jam." Mine jams every large job I put through it. I have yet to be able to finish a large print job. I'm really disappointed with my E3D V6. :(

[@james_robertson]

i have that exact hotend and it continuously jams.

[@HunterDominic]

Of course they can't endorse Chinese clones, the video was all one big advertisement. Don't expect real information from a salesman, expect up-playing.

[@Calebs.bowling]

I have a monoprice select v2 e3d and the hot end keeps jamming time after time do you think it is worth it to keep fixing it or should I just replace it with a newer one also it did not have a silicone sock to insulate the heaterblock but used kapton tape.

[@Fraunzi]

could I attach this to a stock ender 3v2 to use a high output ruby nozzel to print carbon fiber nylon?

[@jthesniperarechiga3284]

I got ANYCUBIC plus Kossel 3D printer the Chinese version 😳 I want to upgrad,e which one do you recommend for me I wanna order one, I just want to order the right size for my machine 👍

[@shivdarshansherugar4979]

Can i print continuous carbon fibre through this extruder.

[@RioElMystic-999]

does 12v or 24v matter when purchasing? I have an anycubic mega s that im trying to install this on

[@giannagiavelli5098]

how do you install a e3d v6 into a kossel linear plus like yours?

[@thecreatorx3d439]

awesome video!!

[@bbusyflying]

what would be the best direct drive to go with the E3D hot end for anycubic mega X

[@nonah1584]

thx my dude love the v6

[@rodolfopirani4909]

What is the difference between volcano and v6?

[@jeremylauzon197]

"This hot end does not jam." Yeeahhh.

[@carlkrueger2131]

Jeremy Lauzon "

[@nonah1584]

it doesnt i have a great one

[@maschinator4457]

Not really... :/

[@omaroskeno3314]

I cant stop mine from jamming

[@itsmealextheme6259]

Ttttooooooaaaatttaaalllyyy

[@willyjauregui6541]

What about the 'Long and Short Distance' of those Hotends? What does it mean

[@undercrackers56]

So I came here for some detailed information and instead got a click-bait advertisement.

[@paulcumber4732]

can you run abs filament on the printer with this

[@MatterHackers]

Yes, you can use ABS filament, but your printer will need a heated bed.

[@corty1980]

Got the Bondtech extruder from MatterHackers about a month ago and must say its a great improvement over the stock one. Looking at changing the hotend. How difficult would it be to change, I have a Creatbot that uses the Bowden setup. Main concern is the wiring and how difficult it is.

[@MatterHackers]

Glad you are liking the Bondtech! Shoot an email over to [e-mail] - we can recommend a good hotend and let you know what the process would be. Thanks!

[@vivdlyvague6627]

The cutaway clip is great, but a physical teardown would have been also appreciated.

[@michaelryan2622]

so, how do you install one of these on an ender 3 pro. I got the full kit from amazon.

[@hojalot]

Will the E3D fit on the KosselPro?

[@martureomartus]

which is the best hotend kit to use for printing above 300 degrees with the CR-10s?

[@HushangA]

If I'm going to pring PLA/ABS, why would I use anything else but stock hot-end? I lol'd at don't use clones, they aren't worth it. They are worth it, depending on your needs. Very bias statement.

[@miguelcuevas2976]

What is the printer you have in the video at the beginning?

[@MatterHackers]

It's the OpenBeam Kossel Pro - you can check it out on our site here: www.matterhackers.com/store/printer-kits/openbeam-kossel-pro

[@miguelcuevas2976]

MatterHackers how does it compare to rostock max v3?

[@MatterHackers]

Both great options! Rostock is a bit larger build volume and cheaper. Can't go wrong with either one.

[@michelyannakis535]

Just curious as if he is sponsored by E3D for stating you shouldn't buy clone. I understand that many clones are probably not manufactured up to E3D quality, however spending almost 40% the price of a Voxelab Aquila only for an hotend upgrade seems unresonable, especially when you know the design is open source.

[@RansomMakes]

Excellent video Dave! I think I need these on my gMax 1.5XT+ since I pretty much only use PLA filaments. And it looks awesome and works like magic! #NOJAMS

[@Thors_Garage]

"Does not jam" statement is BULLSHIT... I had 6 Jams in 4 hours yesterday morning while trying to print CF

[@JayGee6996]

Nice advert. Videos like this just stop people trusting your videos

[@JATMN]

First! :p Very Informative, thanks!

[@Konge555]

i buy clone from china;-)

[@krb3141]

"Chy-Na" -- Said in 2020 Donald Trump voice

[@AdrianLearningJazzPiano]

it is advertisement.

[@lazlo342]

If you want to get more subscribers invest in better microphones. I stopped watching after 15 seconds.

[@patnaty]

Damn it just jam my creality do a bether job

[@iminabrons]

Why did you even bother??