My New Black Honda S2000 CR: E3 - More Progress on Kraftwerks Supercharger

[@bzmaro]

Brings a smile to my face seeing a new s2000 video in my subscription feed

[@singletrackftw]

I can't even explain how stoked I am that LHT is as obsessed as you are, Matt it's a match made in heaven. So awesome that they are so close to you as well.

[@jtex1013]

first time I've heard a quick, succinct definition of MIG vs TIG welding. Those guys seem really cool. Looking forward to finished product!.

[@ObsessedGarage]

John and George are world class.

[@matthewdoades1684]

Sunday mornings are great with Obssesed Garage

[@eric8588]

rebel 510678 How so? Genuinely curious what makes you think that.

[@dennisevertse6726]

rebel 510678 Its not the first kit their installing and knowing Matt a little he has done proper research... heck he even bought the car from them... And it's LHT, not LMT ;)

[@trouxa952]

rebel 510678 LHT is one of the most respected shops in central Florida, if not the whole state. He's worked on my car and more cars of people I know than I can even count. Never have I heard a bad word about LHT.

[@Xsoul1000]

Thanks Matt for uploading. We can follow the progress. :-)

[@markday6524]

These guys really know there stuff and it shows. Your car is in good hands with them.

[@ΒασίλειοςΔιονύσιος]

The stock wheels look amazing!

[@squidwardshouse67]

AP2V3s FTW

[@yvngpierre1063]

Βασίλειος Διονύσιος lmao they look ugly

[@scanspeak00]

It's really great to see the passion, experience and care of these guys.

[@zerodragunov]

attention to detail is everything

[@thelowcartheory]

Where can I get one of those sweet paint booths?

[@Rob.Coleman]

Nice video, some good welding going on there too and nicely explained, they seem like really good guys 👍

[@Eddoogg79]

MATT I'm loving the videos. Keep up the good work 👍🏼

[@LiamBaker]

I don't know why but Matt's voice is almost like watching an ASMR video. I love it!

[@RajK-e3n]

Dang, Car is coming along.

[@SenseiGhostly]

Will you keep the fancy wheel on the silver s2000 and put it on the CR?

[@ObsessedGarage]

No, it's great, but I'm too tall for it. It takes up leg room.

[@xclusiveplayer]

Obsessed Garage isn't the flat bottom style supposed to help with that?

[@FrostyAMG]

Next saga: LTH Installs Whipple on GT350: E1

[@BryceandKyle]

I'm surprised with such an expensive supercharger they don't give you nice T-Clamps.

[@Romu1us]

watching his hands near that saw was crazy! pro status

[@Sir.VicsMasher]

Have you looked into Vibrant clamps? Cleaner then silicone boots and hose clamps.

[@ObsessedGarage]

I'll check it out.

[@Jetbill007]

I like this guy. Makes me want to buy a S2000 and drop it off to them.

[@boylagz]

"No zipties with this install..." -Matt Moreman

[@ObsessedGarage]

Boom!

[@fontez]

MAtt i love the stearing wheel u have on the silver s2000 ...u ll change it on this black CR?

[@ObsessedGarage]

I won't. It's a bit too big for my knees to fit well.

[@fontez]

ok. honestly i undestand why u swap the silver for the black CR....but i really prefer the look of the silver color and intirior ..im not fan of that big spoiler. keep going

[@Vividosx]

Can't wait to see this thing

[@jediali221]

no purge on that tube welding. No big deal but good practise.

[@itayrozenstein6989]

Matt have you thought about putting a mishimoto aluminum radiator?

[@ObsessedGarage]

I don't think I'll need it for backroad driving.

[@dstreetsr]

Which color is your supercharge package that you purchased? I like the color of the pipes that came with it.

[@ObsessedGarage]

Stihl BG-55. I can't do much due to compliance.

[@robertlutz1978]

Are you swapping the steering wheel?

[@ObsessedGarage]

I'm not.

[@FranciscoReyes-lu1of]

Mig can be sloppy if you dont know what youre doing and depending on the wire and gasses used. Sure tig is much cleaner looking. But if you do mig right it can also look really clean. Tig is typically used on stainless, aluminum. Lightweight metals. Mig is for heavier use. Not just tacs lol.

[@emericareaper2]

Love these vids. Those guys at LHT are very interesting to listen to!

[@carlosleandry12]

The CR comes without any comforts? (No radio, no soft top) or whats the difference between the normal one and a CR?

[@ObsessedGarage]

Radio and A/C was an option. There were only a few cars that opted out of them. But the soft top is not an option.

[@bboysfanatic]

Why did you decide to modify a CR when you already had a s2k?

[@scottshipley]

interesting that he made a new pipe because the one in the kit didn't look very clean with the sensor boss on the side but then welded up the pipe and left the weld on show which for me looks worse than the boss did. Not hating, they clearly do great work, I just think it would look cleaner and more oem if the weld was ground smooth or better still a longer pipe used so it didn't need the weld at all

[@role1694]

You should swap steering wheels

[@coltonwkey]

Do you have any recommendations for a lowering rail for an S? I drive an AP1, and I wish I were just a tad bit lower in the car.

[@ObsessedGarage]

Backyard Special is what I have.

[@nyusufffff]

Wait how old is John?

[@matmuffin1]

I wonder if nismo 370z wheels would fit ( two frount sets) they would look bitchen on their

[@ThatBoyFresh617]

Matt what style & size Wheels are u going 2 put on the S2000 ? I hope u put atleast 19'-20' if u can fit it & i think a 2 or 3 piece 5 star wheel will look great. so LMK what u got planned 4 the wheels & tires, Cant wait 2 see what this thing will look like all done & ready 2 go

[@singletrackftw]

LOOKIN 4 THE TRUTH 100% I don't think a 19 or 20 would be ideal for his setup and I would assume he's sticking with 17's or 18's. He wants/needs meaty rubber on this setup and I can't imagine he would want low profile 19's or 20" tires at all

[@tylerbetthauser7647]

My fingers wouldn't ever be that close to that blade

[@ryanboytim896]

"Oh that looks pretty" The life of someone who pay's people to work on their car lol

[@ObsessedGarage]

You must be new here.

[@georgethacker1567]

Way to take a stab at AdamLZ with the No zip ties on this install LOL

[@ObsessedGarage]

I always bust his chops about that.

[@luiscordova7]

You should look into getting a catch can setup Matt. Especially with the added power to the car

[@BOGEYxN1NJA]

i dont know if its only me but the past 3-4 of your videos have not hit my sub box

[@ObsessedGarage]

It happens a lot on KZbin.

[@xclusiveplayer]

Volk CE28N best s2k wheels ever made

[@andrewfessler7203]

Let me know if you want to sell your CR wheels

[@TheKPABA]

I hope those guys charging some serious money for the job, having Matt with the camera and questions behind your shoulder is not much fun.

[@HearMeRohrer]

TheKPABA think of the publicity for their shop, I'm sure they enjoy the camera in their face

[@ObsessedGarage]

Yeah, I think our collaboration will benefit both of us.

[@rockinguitar101]

It wont be long before it is Dialed in, Nice

[@danknug922]

matt, buddy bro. why not just start the car and drive it in the trailer. I understand if the car don't run.

[@ObsessedGarage]

I do if I have a spotter. It's really tight.

[@danknug922]

Obsessed Garage, yeah I guess that makes sense, it would be better to have a second person to watch. these recent videos are great. I'm sure a lot of people appreciate the in-depth on the installs. it's interesting to us car people, and it's obvious you definitely have the right people working on your car. I would definitely feel comfortable with them working on mine

[@justinsayles4211]

Matt get VOLK ZE40

[@matmuffin1]

You know I really hate to say this but get a drift car that you can build look at Adam he knew nothing about cars and since drift cars always break he learned... I think some hack would be good for you

[@dnohay]

He didn't purge the pipe..

[@JohnnyKoch]

100k giveaway ?

[@pvkjhilk8323]

cringy. nice video quality of kit and how to install it right though