How to Fix Samsung Galaxy Watch Bezel Ring

[@Harleyrk99]

The only place I can find the replacement bearings and springs is Germany. There is a guy on ebay selling them. I ordered the kit and will follow you again when I get it. Four years later and you are still helping people. Thank y'all for your help. 🤠 UPDATE: I received the replacement kit. The person selling them in Germany is trustworthy. I put the watch back together and it works like new. Thank you again Matt. 🤠

[@djsammysammy]

How did you get the round white thing to stay in I can't get it to stay in

[@pedrosotolopez4457]

Please link

[@Harleyrk99]

@@djsammysammy I put that on the bezel ring first, it went right into place that way. I tried to put it on the watch side first but it wouldn't stay.

[@djsammysammy]

It was my ring the white piece had tooo many dents it was completely round...my watch is fixed thank you

[@Harleyrk99]

@@djsammysammy You are very welcome. 🤠

[@sladekyle]

I spilled a soda on my watch and I couldn't move the bezel at all. After following this video my watch works better than ever. Thanks! HIGH FIVE!

[@jadanewton6054]

The watch is water-resistant you could have just wash it off

[@-never-gonna-give-you-up-]

@@jadanewton6054 yeah you can even swim with it....if i spill soda on my samsung galaxy s9 I'm not gonna buy a new one either 🤣

[@darknezzghostx1736]

Same thing happen to me lol

[@savagecmt]

Mine got blood all over it. Even a warm soak did nothing. It still works, but because I lost my springs and ballbearings, my bezel is very stiff.

[@mikeandrews4622]

You're an absolute lifesaver, man. I wear my watch while I'm working and your video helped me remove and reinstall the bezel ring so I could finally clean all of the mud and sawdust out of it.

[@MichaelFalveyTywardreath]

Excellent video Matt. A fine example of how YT should be, informative, direct and without uneccessary personal crap. Your a star. Loved the shades with the camera reflected.

[@mrandmrsbelk]

Thank you so much. My watch has been broken for over a year. Because of your video, I was able to fix it!

[@theReddragon991]

I was cleaning my watch after 1.5 years of daily wear and couldn't figure out how to put the O ring back.thank you it feels like new again

[@tuuZhao]

Fixed my watch today! Thanks! Initially, I went to Samsung service center for parts and they told me "No can't do, need to change the entire front screen (2/3 price of a new watch). If the bezel and gasket came off there is no way to put it back on" I rolled my eyes so hard that I almost went blind. So I ordered the parts from FoneJoy as you suggested, and then it's a 30min fix with nothing but my hands. No tools needed. Thanks again. You save me lots and lots of money.

[@1egenDary]

Hey man!! Just wanna thank you on behalf of ALL the galaxy watch owners!! Your video is helped me a lot!! Bless you!

[@petecarr884]

First ever youtube review/post/whatever you want to call it. After finding 3 ball bearings and 2 springs that fell onto the rug, this was an awesome video for fixing. Just wish I watched it before the bearings popped everywhere. You sir are a legend

[@chiefshug7732]

After spilling washing detergent on my watch (by accident, of course), my bezzle was really hard to use. This video helped me. Thesese watches are not cheap and saved me a bundle. Thank you!!!

[@inthewoods352]

Man, your video was a life saver. I couldn't find anywhere to get my watch fixed. I finally found the pieces on ebay from the UK. If it wasen't for your video I would have been lost as all get out putting this together. You made it super easy and I am back in business! Thanks!

[@serdarcelik3227]

O parçaları nasıl temin edebiliriz acaba

[@r1freak1]

My Gear S2 wasn’t broke but it was hard to rotate sometimes, I took the bezel off, cleaned all the parts and put it back together, works beautifully again. Thank you !!

[@AcePilotT90]

Man this video saved my ass. Been wanting to take it apart for months to fix the sticking and sluggish bezel. Man just seeing how you popped it apart and the components made taking it apart and cleaning it super fast and easy. Managed to keep all 4 springs and bearings from factory in it while I done it. Spins like it did the day I bought it. Thanks so much dude.

[@adamgc8484]

Many thanks for this tutorial. I purchased the parts from the ebay shop you named and got it all back together using your help. I found a needle was useful to skewer the springs and a cocktail stick to help poke them into the holes off of the needle. To put the ball bearings in, I just licked the end of the stick and picked up the balls with it. Hey presto!

[@duvalsuarez7089]

Awesome tutorial, you saved my watch, samsung asking me for 350 dollars to fix it and I did it cheaper by myself, thanks so much.

[@jerillar.924]

Yes! THANK YOU. I was having trouble getting my bezel back on until I found your video. The little trick of putting the plastic piece inside the bezel worked like a charm. You're a lifesaver!

[@ChrisLenga]

Thanks bud. I got lucky where all my springs were intact. Had an old Galaxy Watch laying around and shockingly enough the parts were universal.

[@Evilslayer73]

Hi im a future Samsung watch owner and im veryhappy to know we can fix it! thanks a lot for sharing your knowledge!! salutation from Montréal,Québec!happy holydays!!

[@chaos4437]

Wow, it actually worked!!! My bezel came off at work (I lost the gasket, springs and ball bearings). I was able to order them on Ebay and replacing them took about 10 minutes or less! I haven't had a working bezel for a few weeks now! So glad to have my watch back working 100% again!!! Thanks so much for the tutorial! 💯 👍

[@cavehermitt9324]

This worked Fantastic, i did have some trouble getting the bezel off, i used dental floss it worked great. Thanks again

[@amit24kumar]

Oh Man ! You are a gem, i ordered the parts from UK, paid $15 for shipping and $7 for parts, in all - $22, still way cheaper than other option suggested by Service Center guys who were replacing the entire metal housing for $110 (Rs. 8000/-) here in India, Many many thanks for the video....😊👍👌

[@snehaldcruz1191]

Hey bro my bazel broked .. how would I get that bazel ..?

[@GurpreetSingh-je8ub]

Hi bro My bazel too is not working how can order the parts from uk . Please guide me

[@orlandotaylor1336]

This was a brilliant fix to what I thought was a broken watch. I paid £6 for new parts and had it fixed in 10 mins. Good as new. Really pleased.

[@jrdymow]

hey Orlando, where did you get those parts ?

[@gavin9574]

Thanks very much my basil wasn't even turning , after watching your video I pulled it apart very carefully gave it a good clean and it works perfectly. Cheers

[@joshuahardingham7784]

Thank you so much! That white plastic ring was giving me trouble and would not stay in place. I never even thought of putting in in the bezel first before placing it down. Thank you!!

[@MrBrothaskeeper]

Dude...Thx a million for the help, I was soooo confused. I ordered from ebay (2-3 weeks for delivery) but now I can stop trippin' on what was wrong and how to reinstall this "bleepN" bezel. BIG UP'S to you for posting this

[@williamcarterii3601]

What honestly like to say your video is very informative and thank you for the information. I was able to fix my watch with no problems I also cleaned it before I put it back together.

[@ThePeriwinkle2]

Hey! My bezel was pretty stiff this morning so checked out your video to see how to take it off! Super quality video so was able to see clearly how to put it back together.. gave it a thorough clean with a Q-tip and now its perfect again. Thankyou!!!

[@stevenvirgin6580]

Thanks brother, I was extremely lucky. Busted it off in my warehouse but managed to find all your parts, didn't even know they were missing till I watched this. Found all 4 springs and bearings surprisingly, your video was to the point and got me back to good with the watch

[@holyloktarw186]

Matt, this was phenomenally helpful. I didn't have the same problem with the bezel coming off, but it was turning really sluggishly. I popped the bezel off and cleaned everything with q-tips and toothpicks and it now rotates and clicks like a brand new watch. Many thanks!

[@davidwatts6917]

Can not believe how easy this was. I have a 42mm Galaxy 3 and even though I lost one spring the pieces all fit back together and the bezel works great. Would buy the repair kit again in the future and do a much better job of keeping track of the little buggers. I sincerely appreciate this how to video.

[@mdgaugh]

Excellent video. Clear, to the point, and exactly what I needed to get my Galaxy watch 6 clicking again!

[@thebdceigal]

Thanks for the video. My bezel had seized but was now able to remove it and clean out all the dirt and grime without ordering new parts. Just like the day I bought it now!

[@mrvang8077]

Nice tutorial guide! Now I can clean the bezel on my watch 3 after it got some motor oil in there. Thank you for providing this tutorial guide, very much appreciated.

[@Andrew-it7fb]

Great video. Mine was really stiff all of a sudden. I had watched another video on taking it apart and cleaning it, but I couldn't get the bezel back on. Your tip about tucking the gasket ring into the bezel worked great. I'm missing a single bearing but it still works perfectly with 3 out of the 4.

[@matthewfeathers7793]

Awesome video dropped mine in a deep fryer for 2 minutes bezel was stuck watch worked perfectly fine now thank you man

[@gjb26]

Brilliant. Feared the worst when I caught my watch on something and the bezel popped off. Found this video and ordered replacement parts off eBay for £6. Followed the video (definitely use a plate to stop the springs and ball bearings rolling away) and it was fixed in a few minutes. The bezel felt a little stiff at first but after a few rotations it slipped back into place.

[@serdarcelik3227]

Ürünü ne diye aratıyoruz

[@blongbotham]

Thanks for the video. I ordered the parts and the whole process was about five minutes. Even with expedited shipping to Indonesia it was about the third of the price of the Samsung fix.

[@achmadyasir]

From indonesia bro?

[@gqinc1202]

My watch bezel got bent after I fell off of a truck, and was super stiff to turn, I was able to remove it, straighten it out, and give it a clean, good as new thanks to this video 👍

[@Johnjohn-lg1te]

on rounded.com i bought the parts he is showing and a new bezel too, and they came all the way to greece, the watch works fine now. thank you for the video it was big help.

[@darknezzghostx1736]

I dropped a beverage on my watch and the bezel got all sticky and wouldn't rotate, this video helped, thanks!!

[@thgmrdg]

Thank you for this video, couldn't get the watch back together, worried I broke the gasket ring like you warned us about, got it all fixed now, thanks

[@AuthenticTruthSeeker]

Thank you for sharing this video. Much appreciated. It literally took me a few seconds. I was able to get my favorite Samsung Galaxy Watch back to normal after breaking the bezel off incorrectly a few weeks ago. Many blessings and stay safe. ❤😊❤

[@dreamingthelife]

thanks so much, had the bezel off a watch 4 and didn't know which way up to put the plastic spacer back on, most helpful =) and the tip how to put it back, I was in a rush and didn't want to think so sooo helpful cheers =)

[@alexmontressor6064]

Your video saved me about $350ish on a new watch - TYSM!

[@dogglefoxkvk]

You're a legend. I ordered a 42mm on and they sent me a 46. I just cut off 4mm and it still worked perfectly!

[@parthobiswas3761]

1

[@MacTonyJay]

🙄 But why?

[@dogglefoxkvk]

@@MacTonyJay im confused by the question

[@MIDNITE14769]

Just wanted to drop a message to say thank you so much for this video took a couple of weeks for me to get my parts from England but I got my watch fixed because of you thank you so much again and it wasn't that hard

[@myjenkins06]

Truly appreciate you! Had my watch since 2018 and it still works and updates, so I really appreciated you showing how this works. Found the pack on eBay and actually only needed two ball bearings. So I have a back up just in case. Awesome showing the issue with the springs, really helped me out.

[@santhoshsiddi1175]

How buy the samsung galaxy watch 3 ball bearings and spring..... I loss this

[@myjenkins06]

@@santhoshsiddi1175 I found mine on Ebay

[@pablojclavergemio5668]

@@myjenkins06 Hello, could you put a link where you bought those parts?

[@myjenkins06]

@Pablo J Claver Gemio an eBay search will as the one where I bought it has sold out and it isn't allowing me to link here

[@11centdime]

This video was so helpful. Mine fell back in February, got quoted $280 to fix it from Samsung. I decided to wait and I'm so glad I did, ordered the part and fixed it- good as new! Thanks man!!

[@anonymous-404]

what a rip-off. they were gonna charge you for a whole new screen. glad you could fix it on your own

[@jfreeze8743]

Bro, thanks so much for this. I have the exact same watch. I had to do warranty exchanges 4 times through TMO cause they couldn't get my number activated on it so they kept sending me new ones. Every single one manufactured in 2019 the bezel gets stuck or hard to turn after two weeks of use. Turns out the springs are too weak or compressed and don't provide enough upward tension to the bearings. After seeing your video I figured replacing parts with the exact same seller you used would do the trick and it did, it spins how the ol gear s3 used to and is working perfect.

[@swoopsta69]

Excellent guide, followed yesterday, only thing not quite clear is which way up the bezel gasket goes back in

[@vjoel26]

I was able to fix my watch's bezel after watching this video!!! Thank you so much!

[@raplesyrup]

Thank you so much! I had a problem getting the gasket to stay in the groove and after watching it worked perfectly. I had a bunch of fibers stuck underneath the bezel that was making it hard to turn sometimes. Not anymore! Thankfully I found all my screws and springs when I popped it off at my work place. Had to use a flashlight but only took a few minutes to locate em all. Whew!

[@Inquietuss]

I just wanted to say, you are awesome thank you. I could use my watch for months and thanks to you I can now you're awesome keep up the great work.

[@jdgrove99]

Hi, thanks for the video Matt, really helped me get my watch cleaned out and working like new. I found spares on eBay and all worked fine. The gasket ring is the trickiest part but as long as it sits in place when you replace the bezel it works fine. One thing I noticed is that there are four black pads on the face of the watch in between the springs and ball bearing holes. I assume they are cushioning, but one had detached on my watch. I couldn't get it to stay in place so have kept it with my spares - I guess it could be stuck down with some glue but the watch works fine without it so haven't needed to do that. Thanks again!

[@demise138]

Very informative and quick to the point with very good camera angles of what he’s doing while working on the watch Quality “how to” video

[@spocagain]

Hey Matt, very detailed and informative video. I'm sure it will help out a lot of users. Its great seeing you upload again. Hope to see more now that summer is on it's way.

[@mattsbigdream]

For sure! Thanks bro!

[@DavidBelch]

Good job my man, I used this video, did exactly that and now my bezel is restored!! Now do one for the battery :p

[@5Bigfoots]

My watch doesn't have this problem, but I watched the video anyway. Very informative.

[@Mommy_sorry.]

So helpful! This helped me fix my bezel in 6 mins. Thought I was out a watch!

[@ilterismutlu]

Good content, I removed mine, then I cleaned it. I installed it again. Now it works perfect.

[@santimabanta]

Thank you very much for the tutorial. It actually worked. My shipment from UK arrived today and I was able to fix my watch! It was so simple. I used a tweezer aided by a toothpick.

[@x-n-e-o-nc-o-d-eofficial8036]

Thanks man , my watch 6 classic fell to the ground and the screen was fine no scratch but the bezels ring got some small dents but works and now I can replace it. Thanks ❤

[@johngonzales9802]

Worked amazing! So thankful I didn’t have to buy another watch. Much appreciated

[@stephenevans2309]

Thanks mate got the parts from that site repaired the watch you saved me a fortune with this video :)

[@palucci888]

My experience was that the seal of gear frontier did not fit in to my galaxy watch, so I only changed the springs and balls which still fit perfectly then wiped off the old seal and assembled again. The effect of bezel experience after assembly is really almost like new. Thanks for your video.

[@flyguykd]

thanks alot man. I almost bought a new watch. $40 in parts and I saved a 350 watch.

[@darrinjd8071]

Watch saver! You fixed the boys watch. Thank you, great video dude.

[@1998floris]

Thanks! With this guide I opened the bezel and cleaned the inside of the bezel, works like new!

[@Rachikhare]

Lovely. The vid was a life saver, saved my time and money. Thanks Matt.

[@wernerzurowetz6198]

You rock! Thanks to you I was able to repair my watch and it feels just like new :-) Please have the best day!

[@mohamadkhateb6508]

Thanks you very much! Great instructions, prevented me from losing the small sprints while cleaning my watch.

[@Skippy-id9yt]

My galaxy watch bezel got crap under it and barely moved I decided to fix it, found your video , gave me confidence to go ahead and do it....all fixed now ...thanks mate from australia

[@superstreetkiriuha7257]

Same. Is your watch still waterproof?

[@vrsce0178]

@@superstreetkiriuha7257 It's not waterproof. Lol

[@Danolax29]

The part about how to install the gasket was perfect, I had been struggling with this

[@ClarenceDeaton]

Awesome video thank you I'm ordering the parts and fixing this weekend. T-mobile wanted 100 dollars to fix. Thank you

[@rgh622]

Yeah man. I followed your video for a thorough cleaning of my rotating bezel which, felt like it was sticking and not as smooth as it originally had been. Eazy peezy! Make sure y'all have a large clean surface to work on and have a magnifying glass and tweezers at the ready. There are itty bitty pieces inside...

[@Lingham]

Hey. Would this fix the "loose" bezel I've had where it slightly moves from side to side on the 4 classic?

[@viewerman99]

Thank you so much. Ordered the part and fixed it you are a BOSS!

[@danghaf2085]

Thanks for sharing that. I thought I have to get a new watch or pay lots and lots for a repair. Now I have my watch fully functional with £5 🌿

[@danbiddick9610]

Putting the ring in the bezel worked great. Thank you!!

[@gabytzu73]

Where i can find the parts?

[@Bimmerman97]

Thank you so much! Awesome video and great explanation, my watch is back to normal again! I ordered my parts off ebay, they came from the UK.

[@jefferson4245]

I really appreciate this video. Little to no support or parts offered from Samsung. I found a gasket, springs and bearings at STELLATECH online. The parts themselves are cheap, but shipping from Germany was ~$30 through FedEx. Prices were in Euros, but PayPal will convert it.

[@theone132]

Thanks alot! Such a good video. Best i found and kept it in the saved incase i ever needed it. Watch is back like new!

[@georgeannbyrd1681]

If I just need the gasket part then can I get just any replacement bezel kit with the gasket and just cut the gasket down to size if it is too long?

[@UrbanBackflip]

I had a thing happen where I left it on my bed side table and didn't use it for ages and a LOT of dust built up where it formed in clumps and made it so the bezzle didn't rotate so good. So I took it apart to clean it and all the ball bearings fell out. Lesson learned. Might just do what you show in this video and get replacement parts for it but maybe I'll opt for a custom bezel

[@ruthandhob]

Thanks for the great vid. Got my replacement gasket, springs and ball bearings from rounded.com and had the bezel back on and secured in minutes thanks to you.

[@tatish134]

tell me the name of what to order?

[@PJthePlayer]

Just replaced a really sticky bezel on my original Galaxy Watch with this video. Thanks!

[@mathiasschuchardt7506]

Really great vid, i still love that watch and I thought I had destroyed it, thank you very much for that explanation ✌️

[@groendahll]

Awesome buddy!! I almost die trying to assemble it !! 😂😂ill try to get the pieces!! Thanks so much!!

[@vyacheslav_bilous]

спасибо тебе, чувак. У меня уже на столько забило кольцо пылью что уже не мог крутить, все сделал по твоей инструкции и теперь крутятся как будто вчера с магазина забрал. Привет с Украины)

[@BowmanEsquire]

Thanks for this. Had an accident with some coke witch made the bezel all sticky. Whipped it off cleaned it all off with some rubbing alcohol. Works like new.

[@MrBrothaskeeper]

It's all back together again my friend....Thx again

[@freezin48]

Excellent video no bs wish more ppl would follow your style thanks!

[@ryanmillar6415]

Just replaced mine on warranty but this is awesome. Thank you

[@pump5199]

Thanks man, my watch finally works like it should!

[@storiesbyhassam1015]

i was cleaning my watch bezel came of lost the ball bearing in process after half hour of crawling on floor found it and guess what found your perfect video to put it back again you just saved my watch mate Thanks !! from Pakistan

[@naturediscoveries4076]

Thanks so much for the video. I(70yr old female from New Zealand) fixed it easily. I was quoted by Samsung NZ$390 to fix it. Sent to UK for parts but they were mis-delivered and were returned to England and they gave me a refund then blocked me from repurchasing, so I got my son-in-law to purchase. All's well in the end. Around NZ$30

[@brianfromtheinternet2044]

Thanks a bunch! I got myself a second hand galaxy watch that was supposed to be "in great condition", but the ring barely moved at all.

[@jilliangrim6248]

So helpful! Fixed my watch super quick. Luckily fonejoy had the parts again for the 46mm so it was a great Christmas present

[@felderrob]

Awesome video and I liked how you gave the date of when you made vid

[@nemanjapopovic6229]

Hello my friend. I need a little help from you. Where and how i can find that 4 things between hols for springs (i don't know how to name that things) that black, thin, long things. Thank you werry much for your time and sorry for bad english, i hope you can understand what i need. I need that white plastic and that 4 black things...

[@tiffe19]

I got some sand under the bezel but this helped me open and clean the watch. Thanks :D