Maxillary Central Incisor Carving | Step by step | With Proper Instructions | MS

[@drawwithms]

Dm for orders on insta @draw_with_ms_21 or WhatsApp [phone]

[@venthegod]

THX soooooo much ،My first experiments were unsuccessful. I didn't know how to put the marks. I got an A+ because of you. Thanks again

[@drawwithms]

Welcome 😊 keep watching ❤️ keep supporting

[@Swati_snegi]

Best carwing video I had ever seen😇

[@drawwithms]

Thank you so much 🥰🥰

[@anonymouslymeow]

Thanks alot sir for adding diagram for easy understanding...well explained...loved the results I got

[@drawwithms]

Keep watching 😊

[@cornflakes3851]

Sir I'm very worst in my carving. I'm very stressed due to this issue. Even drawing a single line in wax block always makes me a challenging one. I'm very much depressed .plz help me by saying some tricks sir

[@drawwithms]

Carving is not at all hard as you think . Just practice a bit more .. have patience .. carve slowly .. take your time .. gain some interest .. study the anatomy of tooth first and then start carving ..you can ask me daubts I will help ..

[@Dentaltalk_1]

Mainten a shape as samilar to the normal

[@drawwithms]

@@Dentaltalk_1 thanks for helping

[@SahilKhan-zw6lk]

@@drawwithms ok sir

[@riderboy69860]

Chill mar bhai University exam main kuch farak nehi parta byass bana ke ajana hain 😂 aur ek baat curving thora thora kar ke chalu kar ho jayega ❤

[@sanchanadharani7090]

best carving video i have never seen sir tnq so much sir 😊

[@drawwithms]

Welcome 😊

[@radhikakendre9005]

This the best channel for carving videos... Amazing exaplaation, good voice, nd seen properly 😊thanks sir

[@drawwithms]

Welcome 😊 .. thanks for watching 🥰

[@radhikakendre9005]

Can u provide lateral incisor videos link.. I can't find it?

[@drawwithms]

kzbin.info/www/bejne/jZiapniVor2BrM0 This is for lateral incisor 👆 kzbin.info/aero/PLgBT9WhJHvZiNxelFXFG7ejXcV7OcKzgJ This is for all my carving videos playlist 👆 You can share this link to your friends too 😊

[@amh2197]

thank u sooo much sir for your hardwork

[@drawwithms]

Welcome 😊, thanks for watching 😊

[@SowndharyaAppaamma]

Thank you so much sir . This video is more helpful for me🫡

[@drawwithms]

Welcome ☺️

[@SowndharyaAppaamma]

Sir I have an doubt in carving right and left central incisor . How to carve this sir . And I have a doubt in this video, that is yours carving is right or left central incisor sir ?

[@rachayitasaha]

Thanks a lot🙇‍♀️💜 you have taught us greatly 💟

[@drawwithms]

Welcome 😊 thanks for watching 🥰

[@re_theaimless]

This really helped! Kudos

[@drawwithms]

Thanks for watching 😊

[@DivyaSingh-vi7zr]

Thank you 😊

[@drawwithms]

Welcome 😊

[@Hayat.511]

احسنت متابعتك من العراق 👍🏻

[@drawwithms]

Great 👍🏻 , thanks for following 😊

[@harleyfavor3098]

Thankyouu for your guidance♥️

[@drawwithms]

Thanks for watching 🥰🥰

[@bhartinaffri778]

Thank you so much sir 🙏🏻

[@drawwithms]

Welcome 😊

[@ThanikantiHemanth]

Thank u so much

[@drawwithms]

Welcome

[@Swetha-f8w]

Sir what brand carver do you use

[@drawwithms]

It's lacron Carver, you can get it any dental store

[@krishnamohan3059]

API ka achha Hota hai

[@rithekasubramani575]

Thanks a lot ❤️✨

[@drawwithms]

Welcome 😊, keep watching 🥰

[@kaizen5214]

you’re very good at carving i really envy you because I’m not good at it it took me 3 hrs still not good outcome 😢

[@drawwithms]

Practice bro .. it's easy if you keep doing. Do slowly , follow the anatomy of tooth . Thanks for watching 😊

[@SAI-xh5qn]

Thank you

[@drawwithms]

Welcome 😊

[@kindasus1018]

Hi sir. What's the initial size of the dental wax before you carve?(Thickness length and width) I have a block of wax so I still have to cut it to size. Thanks.

[@drawwithms]

Generally it's 3×1×1 cm

[@kindasus1018]

@@drawwithms 3cm length, 1 cm width and 1 cm thickness? And does it apply to every tooth or is there a different size for a different tooth?

[@drawwithms]

@kindasus1018 yes , same dimensions blocks are used for all teeth. You can get the wax blocks from any dental store or Amazon

[@Alraw1]

الهندي وبسسسسسس❤

[@drawwithms]

❤️

[@drfarhat3578]

Any good site for buying wax for practice

[@drawwithms]

Sorry I didn't buy wax blocks online , I got in dental stores nearby. You can try from Amazon nearly 100-120 rs boxes

[@drfarhat3578]

Thanks for the reply I will really appreciate if u can share any Amazon link

[@drawwithms]

I saw on Amazon , 2GM company's box for 104 rs , 40 wax blocks , you can try

[@drfarhat3578]

Thanks….. very nice video

[@drawwithms]

Thanks for watching 😊😊

[@arunachalashiva4865]

Super sir

[@drawwithms]

Thank you 🥰

[@snehasingh4901]

Sir.. plzz help me i am very stressed due to carving.. i feel like i would be fail in practical exam due to carving

[@drawwithms]

There's nothing like taking stress of carving... Just keep in mind the steps and slowly slowly do the carving, the more you will take stress the more it will become worse .. so chill. And nobody fails due to carving 😅. Your college teachers won't fail you for carving.

[@snehasingh4901]

@@drawwithms thank you sir.. but teacher has threatened that if u will not submit carvings on time then out of 130 marks I'll give you 0 then let's see how will pass by written which is of 70 marks

[@drawwithms]

@snehasingh4901 see they will not fail you .. but you will have to complete the quota , otherwise they will keep on harrassing. Try to do carvings , practice. Give time to it.. Ask me daubts regarding carvings I will try to help .. :)

[@snehasingh4901]

@@drawwithms sir ur insta I'd plzz where I can easily ask u for help

[@snehasingh4901]

@@drawwithms sir ur insta I'd plzz.. where I can easily ask u doubts

[@Sonal-dw5vv]

Sir not able to do carve even a single tooth it breaks everytime kindly help clg teachers don't tell anything 😢😢

[@drawwithms]

If it's breaking then do it more carefully and slowly. See at which point it's breaking . Slow down there . While polishing hold the tooth with the crown .. it won't break

[@hamzaakhtar4620]

Relatable bro

[@lamyafathima1589]

Brand of the wax block used? Is it smooth or a bit hard?

[@drawwithms]

Actually I got them from college so I don't know the brand .. but they were smooth af.

[@stakshisharma6697]

HOW TO MARK 7MM ON THESCALE

[@drawwithms]

It's ok to mark 8 mm , 4-4 on both sides of midline

[@iima.N]

❤❤❤

[@suhanijain458]

What is the actual time you took for making this?

[@drawwithms]

Generally It takes 45 min to make one tooth

[@vishnuvinod3884]

Sir please mention the sides of carving

[@anumehabisht3299]

Sir how is ur carver so sharp, do share the secret plz

[@drawwithms]

It's normal lacron Carver, can get in any dental store

[@rohitprasad2643]

Maxillary teeth ke liye to ,palatal hoga ,lingual thode na hoga,yeh doubt thoda clear kar dijiye pls

[@drawwithms]

Yes , palatal

[@shreyasinha2227]

1.37 - sir 8.5 mm kaise lege

[@drawwithms]

Exact nahi lena re , 9 mm le sakte ho

[@arimamehra]

Can we order from you?

[@drawwithms]

Actually my exams are going on , and it will last till next 2 months. After that you can order as many teeth you can . 😊

[@vanshikanarsariya2466]

Are you a bds student? How do you manage Art and youtubd together with bds?

[@drawwithms]

@vanshikanarsariya2466 just utilising my free time for KZbin. Saturdays - Sundays , overnight working and all ... I will work till I am enjoying it...😊 Thanks

[@amitjena1176]

​@@drawwithms I want to order from you please tell me how to contact with you???? Please 🙏

[@amitjena1176]

​@@drawwithmshow to contact with you please tell I want to order from you 🙏😭

[@g.s.n.aishwarya5650]

Sir I am not able to do carving properly sir I don't know how and what to do can you please please please please help me sir??? I am very much stressed and confused sir😢😢😢😢

[@drawwithms]

Ya sure ... You can DM me on insta your daubts

[@g.s.n.aishwarya5650]

@@drawwithms Sir I don't have insta sir!

[@drawwithms]

Okay then , ask here itself in comment section, I will try to answer

[@g.s.n.aishwarya5650]

@@drawwithms sir how to hold the carver properly to get smooth carving this is my 1st doubt sir

[@drawwithms]

@g.s.n.aishwarya5650 for fine carving hold it like a pen. For making the surface smooth use the non bladed side ie, straight side of Carver , and do slowly

[@vanshikanarsariya2466]

What is the price of teeth ?I want to order teeth

[@drawwithms]

70 per tooth, 9324548821 contact no.

[@rohitgoswami4148]

🎉🎉

[@drawwithms]

Thank you

[@jaciryllmiranda4244]

Is this the right maxillary or the left one?

[@drawwithms]

It's right one ... 😊

[@Shehanx11]

crown ka measurement to btade

[@drawwithms]

Bro video ke starting me bataya hai na wo 1.1 cm square wo crown ka hai

[@orangebiatch6689]

sir what is the size of the wax block? 😊

[@drawwithms]

It's 3 cm in length and 1 cm wide

[@harishsai3288]

Bro say it clearly eng students are also doing for there brothers and sisters

[@drawwithms]

I will work on it

[@Chiku__gurjar504]

𝗧𝗼𝘂𝗴𝗵𝗵𝗵 𝗺𝗮𝗻𝗻𝗻𝗻𝗻

[@Chiku__gurjar504]

Kuchh ghus bhi nahi rha dimag mai

[@drawwithms]

Video ko pause kar ke har ek step ko read Karo , diagram dekho . Ayega samajh me

[@z8sl]

Thank you 💕💕

[@drawwithms]

Welcome

[@vanshikanarsariya2466]

What is the price of teeth ?I want to order teeth

[@drawwithms]

70 per tooth, 9324548821 contact no.