MaxxECU staged injection on a four cylinder engine with 8 injectors on a MaxxECU SPORT unit. 2 injectors wired on each injector outputs.
Пікірлер: 6
@snivesz322 жыл бұрын
Still confusing. Is there a separate ground for stage 1 and stage 2 and it alternates the switch to ground between them? If this is the case then it cannot control a variable distribution between stage 1 and 2. OR does it spray half the injector duration on each cycle, and odd cycles it will spray on a closed valve and even cycles it will have half a charge in the runner and will spray the other half of the fuel charge? (I think this is called semi-sequential)
@mushasho5 жыл бұрын
Would staged fuel pumps be setup in a similar way?
@keltalon Жыл бұрын
No. You have to designate an output to the secondary pump and tell the ecu to trigger the relay to the secondary pump at a specified rpm, map load ect.
@mushasho Жыл бұрын
Yes @@keltalon luckily I figured it out hours after I asked..... 3 years ago... been running pwm brushless shortly after that as well. Thanks for the reply