Mazda As Built programming

[@mikecont9742]

Your videos are a lot steadier and clear compared to old vids. I appreciate you taking the time out of your day. Thank you

[@v4vauxhall498]

Keith , I was working on a Vauxhall (GM) Zafira in July , it was one of the hottest days recorded. 3 out of 4 of the doors were deadlocked and the car had been at the previous garage for nearly three weeks.The only door that could open was the drivers, so I had to climb over the seats . In the back was uneaten mc donalds , the floor and rear seats were crawling with maggots what made it worse was the fact there was so much crap and clothes lying around ,that I did,nt see them till I climbed over the seat, took about half a minute to get in there and about 2 seconds to get back out.

[@throttlebottle5906]

why would you even work on it?

[@v4vauxhall498]

I did not, once I got out , it was a done deal

[@PineHollowAutoDiagnostics]

Nice job Keith! You should charge double for putting your health at risk!!

[@SmittySmithsonite]

Haz-Mat pay! 😁

[@DavidS11]

"Why the gloves?" Man you should wear a hazmat suit to get in that car

[@jakeaustin9894]

Absolutely!

[@opl500]

No matter what you own, whether it's a trailer or a mansion, a Lexus or a Corolla, you can always keep it clean.

[@elcheapo5302]

Aw, c'mon Keith. They just wanted to make sure you had all the paper towels you needed. 😂

[@sergiovtorres]

Hello i replaced the ignition lock cylinder on a 01 mazda b3000 i selected the delete stored keys and program new but cant make it work. How can i tell if the new keys is the problem. thanks

[@JustAnother_Irishman]

At least the rodents have plenty to chew, hopefully they'll leave the copper alone. :-)

[@powayimports4175]

Pretty cool. Hey Keith, i don’t much American, when is it required to have two keys for ford/Mazda when programming? Thanks.

[@joneskey3950]

Frank in one of your videos you did GM class 2 serial data (DLC pin 2) diagnosing. I have no comm and no activity (lab scope) on that line. I went all the way to PCM and took the pin out completely. Installed my own pin and directly probed to scope. I don't see any serial data activity. Have checked all my power and grounds to PCM, car runs but cannot pass emissions because of no comm at DLC Safe to call a faulty PCM for no communication? Anyone else familiar with this system please include your input. Thank you.

[@eriginez5171]

Sir...can i ask where u bought ur charger/ maintainer..thanks in advance

[@exmotorsports]

Pretty cool stuff there Keith.. Don't blame you 1 bit for the gloves. Would have done the same thing.

[@chavster6969]

I thought that Ford / mazda do not allow any programming of ecms by anyone but a dealer. Eric O even mentioned it ....??? Can someone explain?

[@jman566]

Hey Keith I’d like to get more into module reprogramming do you know of any good classes out west?

[@markusstrobl1067]

Hoarder. Everything piece of garbage is a treasure to them. If you're really lucky they'll accuse you of stealing something when they pick it up.

[@burtpilon1735]

Maybe you can do a “ what’s in Keith’s tool box day “ that would be interesting as well. Good job as always !

[@richardcranium5839]

remember when diagnostic connectors were under the hood???

[@johnnyouk3513]

What VCM are you using?

[@philh9238]

What is bce modules??

[@felipemoncaleano1534]

Hi mate. Which programming device did you use for this?

[@charliemendez1479]

can you teach us how to flash Mazda 3 2020.

[@63256325N]

"ctrl+v "will paste sometimes when the right click doesn't work....Thanks for the video. (never mind) lol. I used to like changing the points, condenser, plugs, cap, rotor, wires and be done with it.

[@darrellsdiagnostics9207]

Great vid almost calls for bump in labor charge or a hazmat fee just for having to endure the nastiness

[@NewLevelAuto]

I do charge more for these.

[@SAAutoRepair]

That actually beats the one I had today with mold on the headliner

[@sargetester99]

It that a hybrid vehicle?

[@Frank-pv1hp]

An A-1 Cardone. Likely to be as good as the old one!

[@throttlebottle5906]

A-1 Car is done / Car Dont Run

[@danman9017]

were you using ids?

[@CubasAutomotive]

Just beyond disgusting. .. even worse when the owners don't even seem embarrassed! I can't imagine the home!! 😖😖

[@theadventuresofjavier8698]

Did that thing float over from Japan?😲😲😲😲😲

[@leofails456]

Man I did this once on a ford that wouldnt let me download the as bult for the abs. It was like 20 lines of this stuff.

[@RobCarstuff9112]

"Bla bla bla i don"t care" hilarious!

[@billyyoder8171]

Thank you Keith. Good job. I appreciate your videos.

[@leofails456]

Man, if the channel owner or anyone can help me with this problem, I had a customer swap out the bcm on 2011 ford f150 king ranch. I went thru all the steps of configuration and programmed the key. But the interior lights stay flashing (blinking) when the key is in the on position. I get one code. U2100. Someone please help.

[@NewLevelAuto]

You programmed the tpms and had two remotes right?

[@leofails456]

I didnt do the tpms, I didnt have the tool with me to reset sensors, could that be why?. And yes I had 2 keys one with a remote on the head and a regular transponder key.

[@NewLevelAuto]

@@leofails456 you need 2 remotes . And definitely need to perform the tpms learn. Otherwise you'll be blinking forever

[@leofails456]

New Level Auto next time I’ll do that. thanks a million man. God bless.

[@throttlebottle5906]

thinking about it, mine currently looks like a gypsy caravan too :)) of course it's all tools and some materials, which I need to unload

[@rtchrg440]

Nice vid Keith. Was that the IDS?

[@urahaman1479]

Yeah that was ids. Mazda and Ford both use ids almost identical

[@tecnaman9097]

UBER paper towel delivery ??

[@baxrok2.]

Gross. That's a lot of keystrokes and potential for error. Well done sir. Thanks!

[@kevinedward1234]

Keith, great informative video!!!!

[@wyattoneable]

Wow, the things one must know these days.

[@GhettoWagon]

More common than you think! Load it up!

[@1hlyGOD]

U need a whole body suit not just gloves....💩💩💩💩

[@BuggysTowJam]

There's 2 people that live in my area that have vehicles very similar to that Mazda. The first one is a man whom I've met before because he lives a few miles away from me and he had an old 60s Chevy van i was interested in and his place was like something on hoarders literally stuff was every where. And his little Subaru he has completely packed with crap he finds. He considers himself an artist. And then about 30 miles north of me there is a little old lady i sometimes see out and about. She has a Honda and every inch of her interior is filled with stuff. The only open area is the driver seat. I believe they have some mental health issues to allow their minds to find that acceptable.

[@ghavila1766]

Ten to one odds that the owner was a female.

[@smms1276]

SWEET VID 🚹 👍, PEOPLE LIKE THAT WILL TAKE A LOOK IN A CLEAN EMPTY 🚗... THEY R THINKING DANG, I COULD PACK A WHOLE BUNCH OF JUNK IN THERE... THERE QUESTION FOR YOU WOULD BE WHATS WRONG WITH YOU. NICE, NEAT, CLEAN, HAHA , 👍..... THANKS FOR MAKING VIDS 🚹... THE WORLD THANKS YOU

[@mansouralblooshi3004]

Thanks for posting Keith. Personally I will refuse to work in such dirtiness.

[@johnmckamy6398]

I had to do a heater core on one like that and it smelled like a dead body I would imagine would smell

[@jeremystone6613]

It’s not areal car, it’s a tribute

[@robinsonsmotorcycleandauto3929]

Oh yah one of those gross kind of cars gotta love them

[@eddiereichel9354]

I am of the belief that this whole "dont judge people" Is the cause of most of the mess this world is in today. Judgement is good.

[@fernandoviniegra6909]

You are prepared for everything 😎

[@calebmohler3082]

Sick , absolutely ridiculous......

[@defendermender4959]

Nasty 🤢 but not anywhere near the worst I’ve done. Only good thing about the annual MOT test here is they test all the seat belts and buckles, so the car has to be empty- this just wouldn’t be on the road 🙏🏻 Government run test center- so the tester would tell them to beat it.

[@haywardsautomotive6156]

Well I'm here to say I send them right back out the door and tell them I don't work on anything in that condition. I may have when I was younger but the older you get the less tolerable you get and the more I speak what's on my mind. Your customer is a shop which is different. I am the shop owner & can refuse any car that looks like that!

[@wysetech2000]

HaHa.....I have seen much worse than that and a couple i refused to work on.

[@Sangueffusor]

Isn't this sort of As-Built programming on a Ford? :|

[@throttlebottle5906]

think that one may have had an accidental fire, far away from everything :))

[@mikeeustice4452]

Y can't you replace my blower motor id be lying if I said I've never seen that before most of the time I wear gloves to protect their car and sometimes to protect you

[@paultomasetti5164]

Take gloves off before touching you or your tools. Some people in the food industry think the gloves are to keep their hands clean and touch everything including the food.

[@Micko350]

Oh to have a Four Frank Two Yellow Uncle! Keith, FYI Ctrl + C = Copy, Ctrl + V = Paste😊

[@throttlebottle5906]

the ole Copy/Pasta lol

[@SmittySmithsonite]

Pretty nasty. I used to work a major metropolitan recycling route up here in MA, and I've just about seen it all. Learned there are people the walk amongst us that have no idea what cleaning (or hygiene) is ... 🤢 That as-built data coding sounds exactly like me working on these things: "EFF!" "EFF!" "EFF!" "EFF!" 😁 Looks like just navigating to the correct info is going to take me a while to learn! Glad we have your videos for reference! THANKS Keith!! 👍👍

[@chungaleta1234]

No way!!!! I can't believe it.... at first I thought it was groceries, customer went to do the week's shopping and the car broke.....But then... It looks like garbage!!! I can't believe it!!!

[@daveyio87]

I could smell that all the way from Rochester NY. its pretty bad...

[@rogerpatrick3642]

🤤😬 ,,,all I need to say

[@burtpilon1735]

Hahaha

[@arthurfricchione8119]

That is gross

[@NewLevelAuto]

😂, just wait for it pal

[@robinsonsmotorcycleandauto3929]

First yay

[@davidellenbaum1229]

gross

[@halopersin]

First!