Mazda Mazda Remote Programming by Expert Locksmith San Antonio. Need to get a Mazda remote programmed? Try this video or give us a call at: 210-224-1929 expertlocksmit...
Пікірлер: 103
@janetf23 Жыл бұрын
Thank You Thank You Thank You!!! I'm so thrilled that I found this video today because I was thinking that I'd never be able to use my remote entry again after I had to replace my broken fob. It took me a couple of tries, had to watch you again and again before I got it right, but I am overjoyed that I finally did it. You're an angel for posting this! 👍
@sandeshmaharjan57782 жыл бұрын
Works great 👍 my dealer were asking for $800
@andresespinosa69102 ай бұрын
Thiefs
@maliaperez2429 Жыл бұрын
My car starts, I have the original keys to the car and they both died so I replaced the batteries and now they won’t work to lock or unlock my car, nothing even responds. When I try this, my car doesn’t enter programming mode. Any idea how to fix this? Mazda 3 2010
@lisaziino1832Ай бұрын
Thank you very much for sharing this video 😊 Worked perfectly.
@daisyjaneroque62614 жыл бұрын
Thank you so much I saved a lot because of this video.. keep on helping others
@omarhussain20563 ай бұрын
My car key was working fine thought I’d change the battery since I’ve done that the unlock and lock button does not work was working fine before I’ve had the battery changed a few times I have tried the instructions in the video but no luck
@miscgloryofficial4527 Жыл бұрын
this is only for the car doors, this is NOT the immobilizer that allows the key to start the engine(Transponder Programming)... Apparently this(Transponder Programming) is ONLY able to be achieved if you have TWO original Factory Keys that came with car. Otherwise a Locksmiths scanning/reprogramming tool and services will be required. (Anyone with otherwise expert knowledge feel free to correct me but this is what Ive been able to ascertain).
@juanpena3379 Жыл бұрын
Kinda sucks it works that way but it’s a good thing tho
@paulgill7222 Жыл бұрын
Do you know the steps if you do have two working keys? I want to create extras cuz my one key is gonna be no more anytime. The spare isn't all that great either. I've just ordered 2 from ebay. Any help would be appreciated. Thanks
@didoatanasov11074 жыл бұрын
Tried many times after key battery replacement, key lights when pressed but central lock doesn't respond
@Claud1995 Жыл бұрын
have you fixed it and how?
@ralphwhitaker87615 ай бұрын
After programming the remote, the red light keep flashing but vehicle dont start
@franckmananga93994 ай бұрын
wanted to do the programming on my Mazda5 car on km 100 but I forgot the procedure
@alvinjin2361 Жыл бұрын
Thank you so much, it worked on my new key!
@voweeks2 жыл бұрын
I am working on a 2008 Mazda 3. I am trying to program the remotes. I am at a repair shop that lost the remote key. when I do the same procedure you did in the video, after opening and closing the drivers 3x the locks do not cycle to indicate I am in programming mode. I can see the door light on the dash so i know it pick up the open/close signal. if I remove the key or close the door, the lock will cycle 2x to let me know I am exiting programming mode. have you ever seen this issue ?
@Zargeight5 ай бұрын
same thing ! what was the problem ? I close the door afther 3X doing that and the all locks cycle 3x and thats all ..
@yoel10438 күн бұрын
Same problem. Can you solved it?
@isaacmunguia2871 Жыл бұрын
Thank you so much for video. Helped me out.
@billantunez78213 жыл бұрын
Very nice I just program my New Mazda 5 very helpful 🙏🏻🙏🏻🙏🏻
@krystalgarcia312 жыл бұрын
It worked thank you . But the trunk isn’t opening with the remote….
@vincentetflorencen4174 Жыл бұрын
On my mazda 5, nothing happens when I press the unlock button twice after the 1st closing cycle, I don't know what the problem is🤔
@deathward9902 жыл бұрын
Body shop broke my request switches on door and trunk so push button start is now disabled. Now they are not taking responsibility. If I have to repair or replace the switches how much would it cost me?
@MrNovy83 Жыл бұрын
I did it with mine but lock wdnt throught the cycle but i think i messed up innthe end. Now it wont go in to the cycle...
@MsSouham2 жыл бұрын
I've programmed a mazda2 key 🔑 It says that the car needs 2 keys to complete the job. I only programmed 1 key . The engine doesn't start. Is that maybe we need to make 2 keys?. Thanks
@Will_Fong Жыл бұрын
I cant enter programming mode if turn key 3 times, but when i turn 4 times the central locking will cycler, but i cant program the remote that way. any help?
@jaono46233 жыл бұрын
On my mazda 2009 dont work any suggestion?
@garrettkogelschatz97052 жыл бұрын
Mine never does the lock/unlock thing and I’m not too sure why
@makoytikoy45553 жыл бұрын
You’re a Legend!
@bmoussalli19734 жыл бұрын
Hi, i have mazda 3 2006 , two keys both starts the car but only one remote works ,tried to progream the other ,it didn’t !! ,whats the problem ? I brought another fob for mazda 3 from market still didn’t program , i went to lock smith he used a dummy fob ,it did work !!
@ikawtubo3 жыл бұрын
This worked on my mazda 3 2008.. why is it there is no beep sound when locking and unlocking?
@peterxyz35413 жыл бұрын
Thanks!!! Dealership wants 100.00 for this
@carlbrandom4 жыл бұрын
Doesn't work with my 2006 mazda what else could be wrong if it isn't that, fob lights up, its had a new battery too
@RichardSmith-ic1zw4 жыл бұрын
Carl Brandom dealership
@inside13b607 ай бұрын
Hello, I did that same procedure but my remote control does not open or close the doors, what could it be?
@expertlocksmithsanantonio43387 ай бұрын
What's your car year make and model?
@fazzerdusst3 ай бұрын
@@expertlocksmithsanantonio4338same thing my I did the same process many times and doesn’t work HELP
@aronmercado64953 жыл бұрын
how to delete my keyless entey i have program 2 cars with same key and when i open one both open now
@CarloLeonKolega Жыл бұрын
Done this. key not working. :(
@osvaldomiranda2483 жыл бұрын
My remote works one day and then it doesn’t and the car makes that ringing noise when I open the drivers door what do you think is wrong ?
@tmorgan85563 жыл бұрын
What if you only have a key with a chip, no key fob
@steven4vanw3562 жыл бұрын
Will any of the fobs from Amazon work with this? Obviously one that matches what my key looks like.
@franciswestfield32792 жыл бұрын
The ones from Amazon do work. However the Trunk & Panic Buttons are reversed. So I opened up the Remote like changing the battery and reversed the red & black button covers.
@McMillanxXx2 жыл бұрын
Doesn't work for me ? What should I do ???
@lucascoleflora89574 ай бұрын
Thanks !!
@harborkeysupply4 жыл бұрын
I do the same procedure but the cycle does not enter, which could be the reason why it does not enter?
@expertlocksmithsanantonio43384 жыл бұрын
If the car doesn't enter to programming mode by lock/unlock respond (older cars may only chime sound) so call the dealership and make sure your car is equipped with a keyless entry function).
@ray_notes8170 Жыл бұрын
OK, now let's see you start the car.
@MrTonyg5102 жыл бұрын
Didn't work on my Mazda 2.
@여름산타TM4 жыл бұрын
Thank.you for good video. All mazda car programming same? my car mazda 8
@expertlocksmithsanantonio43384 жыл бұрын
Yes Sir, for all Mazda keyed ignition cars that equipped with keyless entry function. (Some older model respond may be a buzz sound, chime -- not lock/unlock the door) . Good luck!
@klaus-peterfleischhauer51702 жыл бұрын
Funktioniert bei Meinem XR3 Leider nicht.....
@mohsinturabshah42534 жыл бұрын
💐 thank you sir 👍🏻
@MrMasterFlash3 жыл бұрын
this worked but my key won't start the car. What could be wrong?
@expertlocksmithsanantonio43383 жыл бұрын
This key has a transponder and transmitter (remote). The on board programming is just for the remote for the transponder programming you will need a programmer (locksmith & dealer will have it).
@DavidBeatypersonal Жыл бұрын
worked for me thanks
@7s292 жыл бұрын
Many thanks 👍
@eswag1534 жыл бұрын
Does this work on 2014?
@jagvillsesolen73732 жыл бұрын
Thanks
@torbjrngeorgsen59852 жыл бұрын
When I double-press on the unlock button, nothing happens. Anyone got an idea why?
@stephenfrench38882 жыл бұрын
Same problem ,did you find an answer ?
@wordtruth61169 ай бұрын
Misleading video. This method does not start the car or it will make the original key not work.
@expertlocksmithsanantonio43389 ай бұрын
You right, this method is "Mazda remote programing". To stat the car you need to program the transponder with a programmer.
@manuelborg7639 Жыл бұрын
thanks!!!!
@AyamesChronicles Жыл бұрын
Dealer wanted 450. With a 40 dollar aftermarket key and KZbin video later and i respectfully told them no
@ThePolerbearproducts4 жыл бұрын
Will it work on a 2014 Mazda 2 Touring?
@daichi_B Жыл бұрын
❤🎉😊
@davecc0000 Жыл бұрын
THIS COMMENT IS ABOUT ADDING A KEYLESS ENTRY REMOTE (EITHER A KEY FOB OR THE BUTTONS ON THE KEY), NOT ABOUT ADDING A KEY TO START THE CAR. o-o-o-o If you are having trouble programming the car for a keyless remote because the door locks will not cycle after you close and open the driver’s door 3 times: m.kzbin.info/www/bejne/qqjZiYevprGpfJY it is probably because this car never had the Keyless Entry System option. This means that you cannot add a keyless remote to this car. The Keyless Entry System is an optional feature. Look in the owner’s manual and note the asterisk “*” at the bottom of the page for Keyless Entry System. It says “Some models”. Not all cars have the Keyless Entry feature.
@adambogale12643 жыл бұрын
אתה ישראלי נכון
@stevejette23296 ай бұрын
The more useless fancy gadgets, the more can go wrong ... AND IT WILL !!! A key should simply be a ... KEY !!! Turn the key on three times, lock the door twice, spin around while whistling Dixie, say 3 Hail Marys ... and AMAZING !! worthless miracle !!!
@GOSHINECRINGUTOVIDEOS55LOLXDDD Жыл бұрын
WTF U STOLEN MISS ANNA'S CAR XDDDDD
@xenos1969 Жыл бұрын
Couldn't explain worse than that!!!! What were you showing, your steering wheel?!
@ralphwhitaker87616 ай бұрын
I did that, it just lock and unlock but remote still not working
@kyhber12 жыл бұрын
Thanks fella , fukn brilliant !! Just did it to my second key Mazda 6 .. Thought was the battery first , Changed that , still wasn't working .Did what you said and worked perfectly . Thanks 👍 👍
@takng49754 жыл бұрын
Thanks !!!
@arunodagunawardana8473 жыл бұрын
I did it myself and it worked. But once the spare key is programmed, Original key didn’t work. So then I programmed the Original Key again, then the spare key didn’t worked. Any suggestions?
@evenworse2 жыл бұрын
I have the same problem...
@robertwodzak3333 Жыл бұрын
Thank you so much. It works perfectly with Mazda 6 GH (2009; bought in Germany). I failed by programming many times before. You need to turn the ignition on and off 3x and shut and open the door 3x VERY QUICKLY. After that, as you said, some double clicks on unlock and lock buttons - and that's it. Thank you one more time.
@caseydeveney609710 ай бұрын
This worked great thanks for this
@evenworse2 жыл бұрын
Thanks for this video. How do you program more than one key at a time? When I program one key, the other one no longer works. Then I program the other key and the one I had previously programmed no longer works. Thanks in advance.
@konepetrusev42604 жыл бұрын
Thanks !!! Perfect working solution ! 2 remotes programmed within a minute Continue with your great mission!
@ignusa7494 жыл бұрын
cool video! so how many keys and key fobs can be programed for a 2010 mazda5?
@cosminbolos6277Ай бұрын
Thank you !
@ing.gilfelipepking48662 жыл бұрын
Thanks it also work for the Mazda CX-9 2012 I suppose it also work the same for the Mazda cx7, cx5 cause the have the same control
@KipsBarefootLeisure3 жыл бұрын
Bought a used 07 mazda cx7 that only one key fob, got 2 more fobs from a junk yard, can reprogram these fobs to work on my cx7?
@walteranthonyocon6768 Жыл бұрын
You just repeated yourself over and over without saying anything.
@michaelhorgle97594 жыл бұрын
I have a mazda bt50 2017 model but doesn't work on it, any clue?
@bimelafrank44582 жыл бұрын
Dos it works for Mazda 3 2010?
@_12welve11 ай бұрын
Is the technique the same the 2010 Mazda 6?
@RandomRichZ3 жыл бұрын
i did this with my 2010 mazda 6. it worked. i have the same fob except mine has the trunk button as well. my problem is just the lock and unlock work. trunk and panic do not work.
@coloredbiker5646 Жыл бұрын
Not mine.. The key don't work after the lock unlock of the door
@RandomRichZ Жыл бұрын
@@coloredbiker5646 like to start the car?
@mikevanhek67402 жыл бұрын
Also works for mazda 3 BK 2006?
@mohohunter155 ай бұрын
Worked. Thank you
@IsidoroDaSilva4 жыл бұрын
Does it work on Mazda bt50 2009?
@lawrenceserrano7600 Жыл бұрын
Thanks so much!!
@bestclarkesspot Жыл бұрын
Thank you.
@yahiasidibenali04702 жыл бұрын
Very good job thanks for sharing
@mattlebrun563 жыл бұрын
Thanks much.
@fastede52 Жыл бұрын
👍
@andresurquiza094 жыл бұрын
Hola puedes escribir los pasos detallados por favor
@rusheekjoshi54192 жыл бұрын
I have Mazda 6 but 🗝️ Duplicate key required00968 99418576