Mazda RX-8 R3 Street Port Drive | Rotary Revs

[@123mell101]

Hands down one of the most beautiful designed car for sure rx8 look are timeless 👌🏿

[@renzakina8427]

The best rx8 ever

[@nabatron21]

Man this r3 so clean! Makes me miss mine so much!

[@Itskascade]

Gotta love a rotary rev video drop

[@rodti_]

Just love your R3 Habbo, it’s gorgeous!

[@Deanozdirect]

R3 is the best of the best rx8

[@RaamiKala]

definitely getting mine street ported. maybe even this summer!

[@lightchips6164]

Hi, did you do the street port mod? How is the RX-8? I maybe also want to get an RX-8 for myself.

[@RaamiKala]

@@lightchips6164 Hi. No I haven't got round to it. I took mine up to RotaryRevs (now Motorsport And Performance (MAP)) and had a compression test. Results were in the mid 6's and low 7's, so the chap advised I've still got lots of life in the engine and it would be a waste to strip it down now and do the streetport. In future I will, probably once I do the rebuild at the same time.

[@RaamiKala]

@@lightchips6164 Hi. No I haven't. I had a compression test in the mid 6's and low 7's. Engine still in good condition so Rotary Revs advised it's not worth tearing the engine down at this stage. When I do a rebuild I will likely do a street port at the same time.

[@ianbradley2153]

Car is awesome Habbo,looks great too,loving the stance of it,soooooo nice.Tell ben I said hi,as always RR are putting out top quality work

[@stuartstaples5859]

A great time to own an 8. Nice video guys 🍻

[@ezpz4659]

:54 the fuckin look and then busting out laughing but trying to hide it. Im lmfao. Love that

[@largodeeprose]

The fire still burns in the Rx8 heart

[@jamaja6834]

It’s weird watching a KZbin video on a car that you love being filmed 5 minutes away from your house

[@MRBX1000]

Awesome lads, love my streetport you did!

[@BarnsB_23]

I love this channel😊❤️

[@uzvisheni]

Where is Josh!?

[@RotaryRevs]

An official statement will be announced in this weeks Q&A video 😁

[@paulhickman6641]

Habbo I know you've only got limited upgrades to your car now, but can you list what you've actually done & where the parts can be bought from? I have the same model as you. Mine will be getting ported with you guys in the coming months. Thanks

[@RotaryRevs]

Sure thing, so in terms of engine upgrades it's been fully rebuild with brand new Mazda OEM seals and bearings, Fresh housings and Irons. This will give the car the highest compression possible which is the key to making power out of these engines. Rotary Revs street port with Mazda OEM coils, NKG spark Plugs, Racing Beat front air duck with stock Mazda Air Box. Lightened Fly Wheel, Short Throw Shifter. JapSpeed Manifold with a RB Duel Res centre section and a Pettit Catback. There is a bunch of handling upgrades and visual too but i'm sure you just wanted to know the engine performance upgrades 😎

[@santosmedina6641]

this is the car you want

[@fluffls]

Man I love that wing! What wing did you get and could you recommend it?

[@millenniumzeek]

Looks like mazdaspeed

[@dmrtagge6274]

Great video bro , but can you tell me the the name and model of rear wing which you has taken on your's rx8 it looks so clean

[@nukmanub3426]

clean build dude

[@colinwinterborne]

I live down in Surrey, mostly stock 05 RX8. Engine not been tampered with. Worth driving up to guys to have her ecu tuned to make sure she's running perfectly?

[@davidhusband5022]

go for it man!

[@raulinhoo3807]

I have a 40th anniversary and want to install an R3-looking kit, where can i buy it? Also is it going to be a pain in the a** to paint it since its the special color Metropolitan grey? Thanks!

[@justinbays265]

What do you mean about the race extension and fuel economy

[@douyan-h6b]

fantastic

[@spiderdragon10]

What were the numbers it made on the dyno?

[@RotaryRevs]

Check out the previous video we did! 😎

[@1.5thondaacord]

love the ride man

[@paulmaillardet8517]

What are the alloys!?

[@akashboodhan5014]

For the upcoming Q&A - How much did it cost to build that street port engine?

[@lengerer]

In Australia it’s about $10,000 AUD for street port plus all new seals etc

[@RotaryRevs]

This specific engine cost just over £4,300 including new sump, porting, re-surfaced housings, ignition system and tuning 🚀

[@SoundBoy808]

it looks great Habbo!

[@andymahers7782]

What sort of increase in bhp was there?

[@mariosram8310]

😍😍😍😍😍😍

[@delta0]

What mods have you got these days? Exhaust, flywheel etc.?

[@RotaryRevs]

Nothing too crazy on Habbo's R3. Mainly stock other than a free flowing exhaust system from top to bottom 🔥

[@aliciafrancoismitchell6882]

What type of rim and size ?

[@cryptoanjuna8343]

Was that a Japspeed Race Spec manifold?

[@RotaryRevs]

Yes, the later version 😁

[@cryptoanjuna8343]

@@RotaryRevs fantastic, I think it is the only manifold I found with 3' inch exit flange (almost, like 2.9 or something) connects with full 3' pettit catback system

[@FenderRealm]

What wheels are those?!

[@RotaryRevs]

Rotor Torques 18" ET30 9.5J

[@FenderRealm]

@@RotaryRevs Love it! Is that the gun metallic colour?

[@anyau]

can i Bridgeport a 6 port NA 13b?, someone told me the effects are not as great as 4 ports

[@josephf1450]

Looking at getting an R3 and came across this comment lol so random. Anyways I’m rebuilding my 6 port N/A for my FC and though your statement is mostly true it can still be done and will still sound and drive great! Driven one already prior to rebuilding my own.

[@bluspectre2042]

The six ports are arguably the far better engine, as the flow is more effective across all ranges. The truth in that statement is the 4 ports are more restricted, so any porting makes more of an effect.

[@spiderdragon10]

What are those wheels?!??

[@RotaryRevs]

Rotor Torques 18" ET30 9.5J

[@TRlANGLZ]

Wait, did habbo undo the race extension?

[@RotaryRevs]

Yes, Habbo sold his race extension engine to a good friend and customer of ours who will be using it for the right purposes 😁

[@michaelayevlogs7458]

Where is this place we’re they tuned your rx8?

[@RotaryRevs]

Rotary Revs - United Kingdom - Leeds West Yorkshire

[@adriangala6930]

What wheels

[@habbofoxx6365]

Rotor Torques 18” ET30 9.5J

[@TheSkabbers]

Your waiting room is cold.

[@anjingUK]

Just stick to playing bongos with your family

[@Carboniotecable]

Hi, how many HP have now?

[@OpenLama]

Not much probably ☺️

[@RotaryRevs]

218 WHP

[@Sol_Creations06]

Wheels?

[@RotaryRevs]

Rota Torques

[@jasonallegretta4598]

Hi guys. How can we email you?

[@RotaryRevs]

[e-mail]

[@dexteratwin376]

I think more actual driving and sounds would have been better

[@Luciferange666]

Bonjour à tous, si quelqu'un une bonne volonté a toujours une Mazda Rx8 dont il ne s'en sert plus... Prière de me l'envoyer svp. J'aime cette voiture et ne peut pas me l'offrir au Togo.. hmm .. au secours aidez-moi venez inbox svp.

[@nabatron21]

What's the hp output on the car now?

[@RotaryRevs]

218 WHP 🔥

[@nabatron21]

@@RotaryRevs nice bruv! How much difference is there between a street port compared to stock? Is it a significant difference in torque, feel, smoothness?

[@muzixman2011]

not everyone like the high pitch sound of the rotary engine

[@xavi5042]

all perfect but the back spoiler and ducktail its not beauty.

[@canyouhearmatt5529]

That's oem Mazdaspeed