You did it Felix!!!!!! Thanks for uploading the video, please don’t forget to update us with results on oil accumulation on catch can. Take care....
@FelixDanGarasiAuto3 жыл бұрын
You r welcome. Yep i will update again once i reach another 1000ks.
@amnon32673 жыл бұрын
@@FelixDanGarasiAuto hello Felix any update about oil accumulation on catch can ?
@FelixDanGarasiAuto3 жыл бұрын
@@amnon3267 will update soon. Just have to get more kms.
@suciul3 жыл бұрын
Any update?
@FelixDanGarasiAuto3 жыл бұрын
@@suciul will make update soon on this :)
@normkraack3 жыл бұрын
2017 and up, the catch can is built into the PCV valve assembly. Look in the service manual. The oil drips into a baffle plate, then returns to the oil pan. Mazda already figured it out.
@FelixDanGarasiAuto3 жыл бұрын
cool glad they fixed tht issue ;)
@ivansemenzato87342 жыл бұрын
Hello, was the assembly updated for 2014 BM SkyActiv engines also? Looking to replace it on mine with PE01-13-570 while doing intake and valve carbon cleaning...
@truhunk12 жыл бұрын
Really ?. Cool. Do you know where I can find that info ? I don't a service manual.
@VictorGarcia-gy8yv Жыл бұрын
I saw a video where someone removed it and shows that not 100% of the oil is catched and some of it makes its way to the intake
@ismaellopez7429 Жыл бұрын
@@VictorGarcia-gy8yvthat’s better than nothing
@timothyirons1969 Жыл бұрын
I couldn't find a video for a 2013 Ford Focus se. I'm so glad I stumbled onto this!
@FelixDanGarasiAuto Жыл бұрын
Thank you i really appreciate it :) Glad this video helps many car owners.
@wky4113 жыл бұрын
I installed a catch can a while ago on my Mazda 3, there are kits but they had the hoses running all way round engine bay. Glad to see you installed exactly as I had. Worth checking the hoses behind the manifold in a bit as the rubber on mine relaxed and started leaking a little on PCV side.
@FelixDanGarasiAuto3 жыл бұрын
Will do. Thanks bro.
@ospuddy3 жыл бұрын
13:05 This would be a good location to put in a T-junction for valve cleaning. The down part of the T branches to the catch can, the top part connects a cleanout port with the intake manifold. The cleanout port should have a straight shot into the intake manifold without a bend. Use the cleanout port to shoot in your favorite GDI cleaners such as CRC GDI IVD Intake Valve Cleaner or Seafoam. Do the cleaning before each oil change and that may keep your valves clean. Cap the cleanout port after shooting the cleaner to prevent vacuum leaks.
@FelixDanGarasiAuto3 жыл бұрын
True that and noted.
@user-vk9ls3ls7d3 жыл бұрын
Peace, mercy and blessings of God A beautiful and useful channel for Mazda owners, and you have good skill in maintenance, I am one of your followers in the Kingdom of Saudi Arabia, and I have published your channel widely here in order to benefit from your experiences, and thank you for everything you provide 💐🌹
@FelixDanGarasiAuto3 жыл бұрын
Thank you brother. I Really appreciate that :)
@Babyvipe3 жыл бұрын
I like your custom made bracket!
@FelixDanGarasiAuto3 жыл бұрын
Thanks man. Appreciate that :)
@Babyvipe3 жыл бұрын
I wonder if this bracket works on mazda 3
@FelixDanGarasiAuto3 жыл бұрын
@@Babyvipe it should work. Just trace it with a piece of paper and get it made up. :)
@mtay653 жыл бұрын
Great vid Felix! What a co-incidence. I just got all my items and about to install. Your vid has saved me lotsa time for cracking my head where to mount the tank! Thanks. Btw, I got myself a Carbing oil catch tank and Samco 10mm hose. All fake stuffs btw. LOL.
@FelixDanGarasiAuto3 жыл бұрын
Hahah yeah it took me sometime to figure this mounting area . So it looks sorta oem. Its all good as long it does the job. Should be alright. Mine is a copy of MshMoto. Hehe.
@Strider96554 ай бұрын
Surely the point is to prevent oil vapour getting into the inlet manifold, the way it's done on tuned old school Ford engines is to block off the hose to the inlet manifold and then run the the hose our of the catch can into a small air filter low down in the engine bay, known as "venting to atmosphere", which is technically an emissions violation, but not actually tested by anyone anywhere.
@FelixDanGarasiAuto4 ай бұрын
yeah ive heard about venting to atmosphere. Installing OCT kit just make it cleaner for the environment. 😁
@nats503 жыл бұрын
I like the way you work on your car. Meticulous.
@FelixDanGarasiAuto3 жыл бұрын
thank you sir
@filbertnorma65563 жыл бұрын
Well done Felix. Been waiting for this vid. maybe you can do a follow up vids on how well the catch can performs, I'm curious how much oil got trapped.
@FelixDanGarasiAuto3 жыл бұрын
Cheers. Yes i will do follow up review on this catch can.
@MrKurber2 жыл бұрын
this mans mazda is going to last to a million miles
@FelixDanGarasiAuto2 жыл бұрын
hehe yess definately . Still going strong here .
@anthonyescalera84133 жыл бұрын
Awesome videos thank you. 2nd time watching one of yours so I made sure to subscribe!
@FelixDanGarasiAuto3 жыл бұрын
😀 thank you very much appreciated.
@rowentan Жыл бұрын
I would probably fit the oil catch can to the right side somewhere in between the battery and head lamp. I'm getting old and stretching all the way back to the firewall to work on something gives me a pain in the back. Especially if you'll need to check the oil catch can periodically.
@FelixDanGarasiAuto Жыл бұрын
Hehe , Yeah definately possible to mount near by the battery / air intake area for easier access. Otherwise with mine one its just sometimes a pain to get to due to minimal working space.
@neldias17182 жыл бұрын
Hi, so I followed your other video on cleaning intake valves. Great video it helped me a lot I replaced the pvc valve with a new one and added a oil catch can on my 2016 Mazda CX-3 at 68k. The catch can has baffles, I paid almost 400 usd with shipping, My question is, how long, how many km before I start to see oil collected? Keep the videos coming 👍
@FelixDanGarasiAuto2 жыл бұрын
Nicely done , i would just check it every 5000kms or empty every oil change.
@diyersamateur54862 жыл бұрын
Pak Felix, kalau senggang dan sempat mhn share cara cleaning catalytic converter dan purging injector Pak 🙏. Agak langka untuk mazda tutorial nya
@FelixDanGarasiAuto Жыл бұрын
ok nanti di usahakan ya
@vivienstaehle13267 күн бұрын
wonderfull thanks
@FelixDanGarasiAuto7 күн бұрын
@@vivienstaehle1326 Brilliant . Keep supporting this channel by like , share and subscribe . 👍🏼
@ripd97 Жыл бұрын
I wish people would state the model year they are working on & the milage it's at.
@FelixDanGarasiAuto Жыл бұрын
2013 mazda CX 5 . About 40k or more kms
@neldias17183 жыл бұрын
How many times did you need to drain the oil catch can , how often and how much? Indonesia has hot humid weather just wondering thanks! Keep the videos coming. I'm a fan and subscriber.
@FelixDanGarasiAuto3 жыл бұрын
i empty the oct every oil change / 5000 to 6000kms.
@skie6282 Жыл бұрын
Ugh im a bit anoyyed you need to take the manifold off to instal a better catch can, but i guess that gives am excuse to clean it all out..
@FelixDanGarasiAuto Жыл бұрын
should add it this engine loves it and this type of oct works very well . 👍🏼
@thomassquires34573 жыл бұрын
cool
@amnon32673 жыл бұрын
Hi Felix ! Great video, thank you! Next video is about cleaning injectors :) ?
@FelixDanGarasiAuto3 жыл бұрын
Great suggestion!
@pipediaz66313 жыл бұрын
Muchas gracias amigo por este video,trataré de comprar el kit ,ahora a esperar que subas el vídeo de cuánto aceite acumula el oil catch can y en cuántos kms.
@FelixDanGarasiAuto3 жыл бұрын
Vaciaría la lata de captura de aceite cada cange de aceite a 5000kms
@pipediaz66313 жыл бұрын
@@FelixDanGarasiAuto ok amigo , muchas gracias
@BalkanRide5 ай бұрын
isn t it easier to connect the oil catch can inbetween the hose that you detached first ? the one on the top that connects the camshaft cover to the intake ?
@FelixDanGarasiAuto5 ай бұрын
so in this video we r installing OCT kit to prevent carbon build ups within the intake. If you were to attach OCT kit to the rocker cover breather hose it would rather do things differently maybe cleaner TB port instead of preventing the intake valves from carbon build up.
@absonndlovu2923Ай бұрын
Hi Felix My CX5 raves just gone and check engine appeared
@FelixDanGarasiAutoАй бұрын
@@absonndlovu2923 time to check with obd scan tool to check what error codes the car haveZ
@SWATT101 Жыл бұрын
The catch cans are not advised in cold climates because of freezing condensate...it's -32C here today...would you agree?
@FelixDanGarasiAuto Жыл бұрын
give it a go n see if its worth to install or not hehehe.
@djdk57653 жыл бұрын
Spot on mate
@FelixDanGarasiAuto3 жыл бұрын
Thanks brow.
@TheFdoamigo Жыл бұрын
Hello Peter, how are you!! Please video cleaning Injectores.
@FelixDanGarasiAuto Жыл бұрын
Hi sir, im well thank you. Ok will do it soon.
@janoidixon56094 ай бұрын
question, my mazda 6 have a oil where the pcv valve is in, can you tell me the name of the little black box the pcv valve is plug into? the gasket on mine is worn it seems causing me to leak engine oil
@FelixDanGarasiAuto4 ай бұрын
oil catch seperator assy. You can buy the whole assy online.
@lapendos71773 жыл бұрын
Thanks bro udah upload videonya sangat membantu, berarti reservoir/oil separator stock dari mesinnya masih tetap digunakan ya?
@FelixDanGarasiAuto3 жыл бұрын
Btul bro. Masih di gunakan. Ini hanya menambah alat supaya lebih bersih lagi di dalam intake valve nya jadi seperti filterasi.
@Khg72 Жыл бұрын
Do you have a video after this install? To check if it's working and after how many months?
@FelixDanGarasiAuto Жыл бұрын
yes i have post a short video on it please have a look on the video list. 👍🏼👍🏼
@SpazmolGUN Жыл бұрын
Молодец 👍
@FelixDanGarasiAuto Жыл бұрын
thanks bro.
@kemangraya2382 Жыл бұрын
For US Mazda CX-5 what is the solution to mount the OCC? Something simple that i can do myself and not have to pay a shop to do it?
@FelixDanGarasiAuto Жыл бұрын
you also can find a good mounting spot under the intake box.
@georgepaniagua61153 жыл бұрын
Thank you for uploading the video. I am in the process of installing a catch can on my CX9, 2.5 turbo. I noticed the inlet on the intake manifold is the same. Not sure about PVC outlet. Please let us know how much oil you capture in the can. I have 53kilo on my CX9 already.
@FelixDanGarasiAuto3 жыл бұрын
No problem. i will update soon after it reach certain Kms
@trapolsukonthorn3 жыл бұрын
Hi Felix, sorry again for one more question because I am plan to install OCC to my '21 cx5 so I would ask the expert like you to make sure I will do it correctly because I have never done it myself. Is it correct that you connected input(occ) to pcv and output(occ)to air intake manifold? In order to do that you have to took out factory tube that came connected from pcv to air intake manifold? Lastly, there is no other tubes that left open that needs to plug it or seal in close? Thank you very much :) I am appreciate you advice!
@FelixDanGarasiAuto3 жыл бұрын
Yes correct sir :) theres no other tubes ,just that 2 tubes .
@sarahobrien33792 жыл бұрын
Can you make a video on how to change the injectors if you have time
@FelixDanGarasiAuto Жыл бұрын
Ok will do.
@Shadixs3 жыл бұрын
Beuh gw baru nyadar situ orang Indo pas ngeliat ada tulisan Rp. 350.000 hehehe.. salam kenal bro..
@FelixDanGarasiAuto3 жыл бұрын
Salam kenal juga
@johnnyd7013 жыл бұрын
What about that last hose that goes to the Top of the Intake hose by thr throttle body? Wouldn't oil go through there as well?
@FelixDanGarasiAuto3 жыл бұрын
That has its own catch seperator so we dont need it.
@trapolsukonthorn3 жыл бұрын
Hi, May I ask you...Do you know if your engine size vs. 2021 cx5 2.5 cc. NA (I have 2021 NA)are the same layout? Also am I correct that you connected input(occ) to pcv and output(occ)to air intake manifold? So in order to do that you have to took out factory tube that came connected from pcv to air intake manifold? Lastly, So there is no other tubes that left open that needs to plug it ? Thank you very much in advance.
@FelixDanGarasiAuto3 жыл бұрын
Yes it is still the same layout for the 2021 engine.
@barrymalloy23533 жыл бұрын
What year is the engine? I thought the modern 2.5 liter Mazda engines didn’t really need a catch can? Am I wrong? I ask because I have a 2018 Mazda 6…
@FelixDanGarasiAuto3 жыл бұрын
you should try installing one as i was surprised what i caught there, i just did another basic service after 5000kms ive collected a good amount approx 60 ml to 70ml of oil.
@unclebean83673 жыл бұрын
Keren instalasinya bro 👍, utk elbow pakai ukuran berapa? Ada rekomendasi seller elbow di toped?
@FelixDanGarasiAuto3 жыл бұрын
Thanks bro seller nya ini Beli Elbow nepel selang 1/2 x 3/8 drat luar elbow hose kuningan tokopedia.link/zGDTx9eepgb di toko distributor pneumatic Rp25.850
@unclebean83673 жыл бұрын
@@FelixDanGarasiAuto siap, langsung order, sungguh sangat membantu.
@FelixDanGarasiAuto3 жыл бұрын
@@unclebean8367 sama sama :)
@unclebean83673 жыл бұрын
@@FelixDanGarasiAuto terima kasih banyak atas bantuannya, bro.
@rhdbbcb3408Ай бұрын
The container should be placed below the level of the fumigation rolling
@FelixDanGarasiAutoАй бұрын
@@rhdbbcb3408 ok mate
@blackriderph4340 Жыл бұрын
Hello felix! May i ask whats the size of the hose? The pcv side is 10mm and the intake manifold side is 12mm right?
@FelixDanGarasiAuto Жыл бұрын
yep thats right pcv side is smaller hose in diameter.
@vladislavbokhman8828 Жыл бұрын
what about crankcase pressure? aren’t you worried about building it up and the gases escaping from somewhere else or worse, mixing with the oil?
@FelixDanGarasiAuto Жыл бұрын
nope not an issue here and still running this setup until now. it works like a charm.
@oaog74 ай бұрын
@@FelixDanGarasiAutoany updates on the OCC affecting the crankcase pressure? Or any oil leaks that happened after the installation of the OCC?
@FelixDanGarasiAuto4 ай бұрын
@@oaog7 hi , ive post short video about it . I have not got any issue or leaks whatsoever on it. still running it without any problems. kzbin.infoUVLjdQswD2c?si=XyUp_hpG5cmiFsNV
@oaog74 ай бұрын
@@FelixDanGarasiAuto thank you!
@unkertech3 жыл бұрын
Thanks for the good tutorial with clear instructions. Can we have an update on how much oil you have "catch" since you installed the OCC?
@FelixDanGarasiAuto3 жыл бұрын
Sure i will make another update soon. Stay tune on the next vid. ✌️
@rexmerza78343 жыл бұрын
Do you have any video on how to replace fuel injectors on Mazda CX5 2.0 gas engine?
@FelixDanGarasiAuto3 жыл бұрын
havent got the video yet but stay tune for our next video :)
@rexmerza78343 жыл бұрын
Thanks Felix!
@ulasima19 Жыл бұрын
My car is 2016 mazda3,Can I just block PVC valve directly?This way you don't need an oil catch can.
@FelixDanGarasiAuto Жыл бұрын
nope not possible. The PCV system allows for cleaner exhaust, prevents blowby at seals and gaskets, removes crankcase gasses generated by the combustion process that will sludge up and destroy the engine if left unchecked, and allows the engine to run more efficiently thus creating better fuel mileage.
@FelixDanGarasiAuto Жыл бұрын
I would recommend to install OCT with any direct injection engine vehicles.
@ulasima19 Жыл бұрын
@@FelixDanGarasiAuto Thank you
@unclebean83672 жыл бұрын
Halo... setelah setahun pakai OCT, apakah di intake manifold, bagian belakang katup throttle body, dan map sensor jadi bersih dari oli?
@FelixDanGarasiAuto2 жыл бұрын
fungsi dari OCT hanya memperlambat kerak karbon dari mesin direct injection. Tidak memperbaiki kebersihkan pembakaran pada mesin.
@neldias17183 жыл бұрын
What was the diameter of the pcv valve hose going to the catch can? And the hose going to the intake manifold?
@FelixDanGarasiAuto3 жыл бұрын
pcv valve is 3/8 . intake manifold is 1/2 .
@kevinhancock40642 жыл бұрын
Great video I have a few questions (my tb is at the front in mine 2.2d . Firstly where did you get the torque specs from ? (A manual maybe ? If so which one ) . 2nd what was it running like before you done the intake clean? I have so much more to remove as my air intake goes to the turbo which is cooled then the tb/intake . Great mode many say its a good thing and I'm sure my pcv (which I'm guessing it's connected to - not taken all video in yet due to kids lol) I'm sure my pcv is at the rear left of the exhaust pressure sensor
@FelixDanGarasiAuto Жыл бұрын
torque specs are from the Mazda CX 5 service guide manual book.
@kevinhancock4064 Жыл бұрын
@@FelixDanGarasiAuto only manual I can find is an online 1 ? That what you have?
@FelixDanGarasiAuto Жыл бұрын
@@kevinhancock4064 Yes the one online i use for reference.
@kevinhancock4064 Жыл бұрын
@@FelixDanGarasiAuto aw ok brill thank you I m may invest I think I've seen it for around 28 quid
@xdejablu3x2 жыл бұрын
Awesome video! Do you think it's okay to use a 3/8 hose instead of a 1/2 hose for this catch can setup on these non turbo Skyactiv engines?
@FelixDanGarasiAuto2 жыл бұрын
Yes the one for the pcv line can use smaller hose 3/8 , the intake valves use the bigger hose 1/2.
@xdejablu3x2 жыл бұрын
@@FelixDanGarasiAuto Awesome. Thank you. Got to run back to the store and return it now and exchange for a 1/2 hose.
@FelixDanGarasiAuto2 жыл бұрын
@@xdejablu3x no worries mate
@FelixDanGarasiAuto2 жыл бұрын
@@xdejablu3x or you can find small piece of reducer tube from 3/8 to 1/2 just attach small piece of tube coming from the pcv then add the reducer to it the use 1/2 hose up top.
@xdejablu3x2 жыл бұрын
@@FelixDanGarasiAuto I'd have to buy a 1/2 hose regardless because I currently have only two 3/8 hoses on hand. I'll keep it in mind though for future projects. I'm just going to return the hose for a 1/2. I never ran a oil catch can with two different hose sizes before. Hopefully no issues arise with pressure on two different hoses.
@alfredsevillo88153 жыл бұрын
Felix Dan hi I have mazda 6 year 2016 . Where is the transmission oil pressure sensor located ? And also what is the difference between the pressure sensor and pressure switch.? Thank you sir.
@FelixDanGarasiAuto3 жыл бұрын
Its located inside the transmission drain pan control valve body. Theres transmission oil pressure sensor A and B.
@Toro-zw1ix3 жыл бұрын
Hi Felix what is the size of the fuel hose did you use? I already purchased the Catch can same as you! Thank you!
@FelixDanGarasiAuto3 жыл бұрын
1/2" fuel hose. It would be better if can get the one size smaller.
@Toro-zw1ix3 жыл бұрын
@@FelixDanGarasiAuto cheers bro! 👍
@agungsedayu38622 жыл бұрын
what size diameter pipe you use for the catch tank (for mazda cx5 2.5)?
@FelixDanGarasiAuto2 жыл бұрын
you can choose 3/8 hose for better fitment (for pcv side) this video i use 1/2 hose.
@agungsedayu38622 жыл бұрын
@@FelixDanGarasiAuto 10mm and 14mm?
@FelixDanGarasiAuto2 жыл бұрын
@@agungsedayu3862 10mm and 12mm
@miklagrimas72903 жыл бұрын
I purchased a id 1/2 and 3/8 should that be fine? And which hose goes to which if you remember?
@FelixDanGarasiAuto3 жыл бұрын
smaller ones goes to pcv unit and the larger hose goes to intake manifold
@taichihead423 жыл бұрын
Is the Mazda 2 build date 2018 direct injection also?
@FelixDanGarasiAuto3 жыл бұрын
Yes all generation mazda skyactiv is a direct injection engine.
@taichihead423 жыл бұрын
@@FelixDanGarasiAuto So will I end up in the same situation as you? I have driven 23,000km. What should I do?
@FelixDanGarasiAuto3 жыл бұрын
@@taichihead42 very much identical. Well many users also dont mind not having oil catch can added to their car which is fine. Just use a good fuel and service your car regularly with good engine oil will be just fine. But if you want to add one like on this video you can do it too so you get a peace of mind that the intake valves are not caked up with carbons as before without oil catch can.
@absonndlovu2923Ай бұрын
Mazda Cx5 codeP0122 and Code0222 and U0442
@FelixDanGarasiAutoАй бұрын
@@absonndlovu2923 PO442 you have a leak somewhere within the P0442 could be anything in the evap system: loose/faulty gas cap, purge solenoid, vent solenoid, charcoal canister, vacuum leak in any of the many hoses.
@vincentlee24606 ай бұрын
What is the ID of the rubber hose?
@FelixDanGarasiAuto6 ай бұрын
ive wrote it in the description. 😁
@harryarora91303 жыл бұрын
Hello Felix , I am planning to buy a Mazda cx5 petrol 2.0 skyactiv engine manual transmission how would you rate this car ... i have seen a lot of your videos and subscribed to your channel ... please can you give your opinion or suggestion on this model would highly appreciate it .. Thanks
@FelixDanGarasiAuto3 жыл бұрын
it is a very good reliable car for me. Fuel economy. Very zippy. i would rate 8 out of 10. Engine and transmission is very good.
@mtay653 жыл бұрын
Hi Felix. How much oil/gunk has the tank caught so far?
@FelixDanGarasiAuto3 жыл бұрын
i just checked i caught about 10ml. just done about 3500kms since the install. not many . i found a small leak on my fitting had to retighten it. i will do another post once reach to 5000ks for my next service. :) stay tune.
@mtay653 жыл бұрын
1:33 why did you need to modify the fittings? I thought the fittings that came with the can is dia 1/2"? What's the ID of stock hose?
@FelixDanGarasiAuto3 жыл бұрын
I had to modify the fitting to elbow due to it is hitting the battery and some part of the engine. The id of the stock fitting is 12.9mm.
@mtay653 жыл бұрын
@@FelixDanGarasiAuto Thanks, Felix. Did you mean OD of PCV fitting?
@FelixDanGarasiAuto3 жыл бұрын
@@mtay65 ohh the od of the pcv is smaller i forgot to measure it but i can confirm it is smaller .
@mtay653 жыл бұрын
I have got myself a Samco hose with 10mm ID. I think it doesn't fit.
@FelixDanGarasiAuto3 жыл бұрын
@@mtay65 maybe try using some kind of reducer ?
@561alpha3 жыл бұрын
Would size 3/8" hose work?
@FelixDanGarasiAuto3 жыл бұрын
Yeah it will work just match it with your inlet outlet fitting.
@boulkariatayeb54573 жыл бұрын
What is it for that customized part??
@FelixDanGarasiAuto3 жыл бұрын
Just a mounting bracket for the oil catch can to sit in the engine bay.
@hindra83 жыл бұрын
om dudukan oil catch nya dijual ga? bisa buat mazda 6 kan
@FelixDanGarasiAuto3 жыл бұрын
untuk dudukan nya tdk dijual. seharusnya bisa untuk mazda 6 juga. :)
@mervynsng3 жыл бұрын
Where can I get that exact mount?
@FelixDanGarasiAuto3 жыл бұрын
Have to get it custom made.
@pipediaz66313 жыл бұрын
Da resultado o no?
@FelixDanGarasiAuto3 жыл бұрын
i just checked and im surprised it collect some oils within the catch can. :) i can confirm it is working as it should be. i Will do a follow up video for us.
@pipediaz66313 жыл бұрын
@@FelixDanGarasiAuto ok estaré atento a los futuros vídeos , muchas gracias
@oktaviowibisono83793 жыл бұрын
Pakai selang 0.5 in min??
@FelixDanGarasiAuto3 жыл бұрын
Iya selang 0.5 atau 0.25 jg bs.
@oktaviowibisono83793 жыл бұрын
@@FelixDanGarasiAuto oiya, kan ukuran yang di manifold sama pcv kan beda, misal pake ukuran 0.5 bisa pas di dua" nya? Mesin 2.5L kan?
@FelixDanGarasiAuto3 жыл бұрын
@@oktaviowibisono8379 bisa potong sedikit 2cm selang yg aga kecil diameternya buat nge ganjel adapter di pcv valve nya. Jadi pas masuki selang 0.5 inch bisa di clamp dengan padat. Soalnya memang aga kecil ukuran pcv valvenya. 2500 cc sama pcv nya sperti 2000 cc.
@oktaviowibisono83793 жыл бұрын
@@FelixDanGarasiAuto siap min, trims infonya
@FelixDanGarasiAuto3 жыл бұрын
@@oktaviowibisono8379 sm sm.
@Entertainmentinc13 жыл бұрын
i dont think this is the proper way to do it, the catch can is suppose to be lower than the pcv valve, i know this because i have catch can on my mazda 3 and bmw and it science that the the oil in the pcv cannot travel upwards
@FelixDanGarasiAuto3 жыл бұрын
mine is fine n works it catches some oil in it will show you very soon on my next video. but if u want to install it lower area you can.