Replace door lock actuator (front left door) Mercedes W212/W204
Пікірлер: 59
@b21playa2 жыл бұрын
Thanks for this, great help. I’ve just started mine and got to the point of having drilled all rivets out. Just an update to say I’ve managed to complete the swap. Total time was 2.5hrs which was largely due to watching this video and knowing what I needed to remove. Many thanks
@ronalddsouzak2 жыл бұрын
But, I don't think we need to remove 3 plastic hook and rivets at the vedio 20:40 till 22:50... Can you give me some idea please.
@b21playa2 жыл бұрын
@@ronalddsouzak they do need to be removed to swap the lock.
@MarkRadfordAZ3 жыл бұрын
I wish I found this video before I started replacing my window regulator. Another video showed the wrong procedure for removing the panel and detached the lock instead of removing it in one piece. At least watching this saved me in the end and allow me to get it all back together. Thank you! Please include the Torx screwdriver and other tool sizes next time as that would help as well. Good job.
@mealey1004 жыл бұрын
Thank you so much for taking the time to post this. It was very precise and it pulled me out of a hole. Liked the way you corrected your small mistakes. Overall an excellent tutorial...
@bhogala3 жыл бұрын
Thanks for the video. It confirmed for me that it is better to just leave the passenger door locked and not have to deal with this headache lol
@adebrownlow4 жыл бұрын
Very useful. Changed mine today. 350 cdi avant-garde estate 10. No real issue. Except I had a problem with the handle release screw. Didn't have a c10 long enough... had to improvise. First time riveting so a bit nerve racking taking a drill to my car... but all good in the end. Thanks.
@francorossetti18933 жыл бұрын
SUPER GREAT!!! I couldn´t have done it without Your excellent video! Thanks for sharing so very kindly! All the best from Franco in Stockholm, SWEDEN.!
@drosser846111 ай бұрын
Very thorough and informative. WARNING - do not watch this video if you suffer from vertigo - I'm off for a lie down🤩🤩
@MB2124 жыл бұрын
Nice done 👍 Don’t looking forward to fix something behind that cover 😅 Glad for now everything are good behind there!
@hanakkus3 жыл бұрын
This was very very good...thank you..you know your stuff..love the tools
@KYKYMAKA3 жыл бұрын
Thank you so much for the detailed video, you helped a lot. I wish you all the best, Russia Moscow thanks you!
@larrytheanswerman57894 жыл бұрын
Great job, Thanks!
@TiaShaw.4 жыл бұрын
EXCELLENT.. !! thank you
@koperkonrad233 жыл бұрын
Great video. Thanks.
@ocamp3806 Жыл бұрын
brother amazing video
@zzo283 жыл бұрын
Good trickshot with that plastic rivet in the corner. Many people break that. This is better (original/right) way like use small screwdriver to small hooks on rivet. The same thing on my w204.
@zzo283 жыл бұрын
I tried it today and somebody removed it before me and outter rivet push back 90° wrong on left side doors. So now the small hooks are not right (little bit "broken-demaged) when i tried it and i cant remove rivet. I tried it on right doors but that small hooks little bit break too. So i will need use another style. This is not work for me. I dont know if its different between right/left doors and turn center blockator right or left 90°. My door panels have crack sounds and i ear some outer noise- C class doors havent sound deading like E&S class & i really need do some like on my previous car. I hate noisy cars and crack interior sounds. So I need remove this rivets first.
@dusanskulavik18784 жыл бұрын
Excellent video, also with all details. I prefer do not use rivets again but any disassembly joint.
@BBTM7214 жыл бұрын
Da, ni meni nije jasno zašto to mora biti učvršćeno sa zakovicama a ne vijcima? :-)
@dusanskulavik18784 жыл бұрын
@@BBTM721 I do not understand it too, it seems that it is cheaper to use rivets.. Maybe it is acceptable on Skoda fabia, but not on Mercedes :))
@mikichicago12002 жыл бұрын
Thx !
@thienkieu9253 Жыл бұрын
thanks pro
@pradeepdhamija5693 жыл бұрын
what a design fro MB
@Dnasty12 жыл бұрын
Any idea how to do this on a w207 the door seems to be all one piece with no rivets.
@ocamp3806 Жыл бұрын
my problem is my window it will not stay in place i want to do it myself i just dont know how I would put the rivets back and if i had to replace the motor do i still have to remove the whole locking mechanism i seen that the regulator was attached to the other side if we can talk that would be great
@Unusual-User4 ай бұрын
12:07 Snack
@stevenhaff33324 ай бұрын
Thank you for taking the time to share your knowledge.
@trusted_reviews Жыл бұрын
What type of drill bit did you use? Great work!
@BBTM721 Жыл бұрын
8 mm or more!
@robertehlers43308 ай бұрын
You can slide it up you took a lot of stuff off i dont know why
@ConesuelaLadyTailor2 жыл бұрын
That's a Big Boy's pop rivet gun🤣
@senioraces3 жыл бұрын
great video! how long did it take you to do this? Thumbs up!
@BBTM7213 жыл бұрын
5 hours cca :-)
@senioraces3 жыл бұрын
@@BBTM721 THANKS!!
@b21playa2 жыл бұрын
@@BBTM721 WOW. I have passenger side (UK) to do on mine, was hoping it wouldn't take so long :(
@aldrickloh48804 жыл бұрын
Hi, you showed the defective door lock motor. To replace this part is relative cheap. Question is may I know where is this door lock motor located in the door lock actuator assembly pls? Thanks,
@BBTM7214 жыл бұрын
yes, the motor is a relatively inexpensive device, but it can only be reached if the actuator is destroyed. A strong rivet is installed that holds the gear assembly. It is impossible to reassemble everything :-)
@adys611510 ай бұрын
What happens if you disconnect the airbag side sensor????
@BBTM72110 ай бұрын
BOOOOOOOOM!!! 💥💥💥
@F0reverYoung2 жыл бұрын
Is there a fuse for these actuators?
@BBTM7212 жыл бұрын
I do not know!
@maxxgabi9 ай бұрын
What diameter are the rivets? Thank you.
@BBTM7214 ай бұрын
6,3 mm (1/4") x 12 mm
@ISIAHR2 жыл бұрын
How did you replace the rivets?
@BBTM7212 жыл бұрын
It can be seen in the Video clip. Drill only the head of the aluminum rivet with a drill bit approx. 8 mm. The rivet falls off on its own.
@b21playa2 жыл бұрын
Drill out and replace with new 6.4mm ones
@ocamp3806 Жыл бұрын
i seen that the blue device was being used is that the only way to put rivets back on
@b21playa Жыл бұрын
@@ocamp3806 any river gun that can handle 6.4mm rivets. I used an accordion type and worked fine
@trusted_reviews Жыл бұрын
Look on eBay they sell them
@adys611511 ай бұрын
Anybody know what actually goes wrong with the actuator? Can it be repaired?
@BBTM72110 ай бұрын
Bad contact on the motor
@jocrp63 жыл бұрын
Whats your labor time on that?
@BBTM7213 жыл бұрын
5 hours cca :-)
@jocrp63 жыл бұрын
@@BBTM721 I've worked on Mercedes for 20 years, That had to be the most pain in the ass door lock actuator i've ever done! better pack your lunch people if going to try it!
@ronalddsouzak2 жыл бұрын
@@BBTM721 Thanks for the vedio very helpful, but at 20:40 till 22:50 , we still need to remove 3 plastic hooks? And rivets, can we not just clip out and slide the lock itself? Please let me know. Thanks in advance.
@ocamp3806 Жыл бұрын
please let me know if we can exchange numbers i have many questions please