3000 mw laser engraver review

[@MBcreates]

CNC 3018 mini router review: bit.ly/CNC3018Review The Engraver from this video: bit.ly/2GQCfHz A bigger Laser Engraver: bit.ly/2ZzDbHz Blogpost on Laser Safety: bit.ly/Laser-Safety

[@lukasd6998]

can you show how you upgraded the cooling system?

[@joantabuada7158]

is there any link of a software? i have scarve but it's not working 😐

[@henrysiegertsz8204]

I bought the same machine yesterday on eBay, from KKMoon, for engraving my Logo and DOM direct to workpieces. I've found videos where people have been unhappy, with erratic results and inop machines. I'm feeling more assured now and can't wait to get my machine, (should arrive tomorrow).

[@jaycarnduff2015]

Just curious mine should arrive tomorrow is it any good ?

[@190505]

I’ve had this engraver for awhile and randomly it won’t connect to my computer now. Keeps saying I need to format the drive but if I do so it’ll delete everything on it including the software to run the machine

[@mgoblue60067]

I just got one of these. I'm having trouble trying to determine where the logo 'starts'?? I want to do some drink coasters to start. Any advice would be appreciated...thanks.

[@Mjofhair]

Hi there. Would you still have the software to download. My item did not have a USB with it and I got it a while ago and just opened it. If so I would appreciate the help because it is not online anywhere. Thanks.

[@adamsimon7402]

After 5 months of use has the laser produced any problems?

[@shirleyvdwal]

I cannot send the picture to the machine? I dont have the the "arrow down or up button" to send it to the machine. When i hold the center button on the machine it starts to make something else. Is there a newer software? What am i doing wrong?

[@t1czer]

I got mine for 60$ (used) today. Can't wait for it to arrive

[@Quote_the_manc]

What depth does it burn 🔥

[@macheciau6717]

@mbcreates hou could i change the distance betwen rows? its 3mm and i need 2mm

[@traceyseto5183]

can this model engrave clear acrylic to make cookie debossing stamps?? TIA

[@patrickewing8980]

How can i get the software? I didn't receive the software when I purchased mine.

[@thvieira86]

Could this machine cut 0.5mm fabric? If so, how?

[@CorpseCallosum]

Will it remove the coating from metal business cards such as anodized aluminum?

[@MartinDolan]

I'd love to know this too. Also what does it do if used on plastic (perspex etc)

[@frogz]

yes

[@ukbhaia11]

Hey guys, can we print on metal

[@travissmith7471]

You have convinced me to purchase the laser engraver... Thanks for sharing...

[@LJS755]

What is your experience?

[@travissmith7471]

@@LJS755 I have done a little engraving by hand... And on some CNC machines... But I'm rusty... And just thinking about laser engraving again... So, I'm saving for something in the future... Thanks for responding and inquiring...

[@francescadaviddi5744]

Hello, do you maybe by any chance know if this could engrave also on rubber? Thankssss

[@kevwigan]

is this video mirrored as your routing the wrong way your climbing ?

[@nikitahendriksen]

Hallo Hoe lang duurt het ongeveer om een klein plaatje te maken op een stukje hout van 3 x 3 cm

[@T_aus_B_an_der_Spree]

Hi, Thanks for the great video. Is it possible to print, plastic business cards? I want a waterproof methode to write information on this cards. How I find at which point the laser start? Thanks for your help

[@CapricornDayz]

Is there a video on how to use the bigger engraver? Thanks.

[@siveriumvelkepan9421]

Can it cut cardboard and engrave leather too?

[@jonathonmccabe9217]

Hello, do you still have the usb that came with the machine? I have a similar machine but have lost the usb stick that came with it and I can’t find the software for the machine ANYWHERE online…. If you have the software would you be willing to send me a copy please?

[@Ig88776]

I'm interested in something for production and am concerned about the heating. Could you provide advice and share details on the heatsink/fan upgrade? I'm not so technical so this is great!! Thanks🙏♥️

[@keithwilcox4604]

Hi, good video, got one of these & find it ok for my hobby, have you any idea where i can get spare parts: ie laser module/head. Regards

[@nadiedeinteres1285]

Hi, I'm thinking of purchasing a laser engraver and tought of this one so that's why I'm watching a review. Do you reckon I can engrave the plastic of an aisoft pistol? Is it powerful enough to engrave metal? Also, how deep you think the engraving can go? Thanks a lot.

[@jmcbc1963]

So thankful you posted this video, do you have photos of the heat sync and added fan upgrades?

[@marciomarttins9606]

Boa noite. Você saberia informar se este equipamento consegue realizar desenho em placa de circuito impresso?

[@ooowe6675]

Could it do a pistol grip? Polymer?

[@DesignsbyLady23]

How did this hold up over time? Is it for short term use? Looking for something to make holiday ornaments

[@АндрейНеважно-ш4в]

Hello, can you engrave on metal (aluminum) with this laser?

[@RunninGunner04]

No, unless you use a sharpie and black out the metal. No reflective or transparent materials

[@Steverobbo]

Can this cut stencils out of 2mm thick foam?

[@TechTinkerWorks]

Did you consider putting a laser on your cnc mill for bigger work area?

[@MBcreates]

That sound like a good plan 😉

[@annemalaran6928]

Can this engave gold metals?

[@jw200]

Cnc idea. Make or buy small vacuum pump. And use vacuum on special table to hold any items. Without tape. We have large cncs at work and they hold using vacuum

[@mighteydog7]

Does this machine in grave in metal?

[@kinehansen2909]

Does the software works with Mac?

[@KRuskea]

Is for glass?

[@gregsimon7468]

What CNC is that? Looks like a nice size.

[@enricoruzzante7190]

Hi, thank you for sharing. could you kindly tell which are the adjustements on software that permit that perfect logo at 4.05? I Just bought one...

[@cheatcodeanuj4511]

yes good question

[@samazaphikel241]

Hi, I also have this laser engraver, but it comes without software USB pen. And I dont get a answer from the support.Maybe you can share the software?

[@mrtnzslt89]

Does anyone know, does this laser engraver accept DXF format?

[@MisterFizz]

Would you try the laser to see if it will put a mark onto a plastic coca cola bottle cap?

[@sylvainlavoie6737]

Can it be connected to a MAC ? Thanks!

[@steveglahn2693]

Can you please let me know what the voltage and amperage is for the power supply? I have one of these and no power supply - thanks and God bless, Steve

[@MBcreates]

12V 2A

[@maxf1542]

Could i bother you to post the usb drive online, i lost mine

[@maykolnavarromendez2319]

hello i need the software

[@jhonymarin6813]

friend thanks for your answer ....... the machine is very good but, I need a bigger engraving area more or less than 15 cm. Do you know any machine like this that has that area? that is good and economical

[@MBcreates]

Something like this bit.ly/2ZzDbHz ?

Did you try graving any PCB ?

[@sindresolhaug7681]

Hello, just got this and cannot get it working properly, and i suspect it is the computer I am on. Which operating system do you run this on?

[@sean00172]

whered you dissapear of to?

[@charleshines6155]

What you should do is cover up the sides of the machine that are open. Even if it is with something removable.

[@Ajdjdncjekskf]

Can it engrave leahter, suede and/or metal / aluminium?

[@Acid_Ink]

King J Leather yes, Suede probably, Aluminum and other metals? Not a chance. The laser would bounce off the metal onto the walls and such. I have one of these and was able to engrave something into leather

[@chevyracings10]

@@Acid_Ink will it do plastic

[@Acid_Ink]

@@chevyracings10 No. not unless there’s something darker under the plastic that the laser won’t reflect off of. You’d be better off using a CNC machine or even a jigsaw for plastics

[@NeAr1986]

Can it cut vynil sticker?

[@UnboxingTVofficial]

Yes

[@UnboxingTVofficial]

Quick Question: Do you have two Program on your USB Memory?

[@tiagodeandradefarias8378]

Hello! can you post a link to download the mini recorder software? I'll be very thankfull.

[@aleksandrdziubii9695]

yadi.sk/d/COSalavHNomvuw

[@Acid_Ink]

How did you get the image to print 85x85? I’ve been trying for a while to do so and I haven’t been able to as of yet. Any tips?

[@mtwa48]

Great review. Is it safe to look at the low power alignment dot whilst not enraving, for example when focusing and aligning ?

[@MBcreates]

Thanks! I’m glad you liked it. From what I’ve seen the alignment dot is a very low power laser beam and I suspect it’s not harmful. But why would you risk it? I put my glasses on before I power on the machine. Mistakes happen and the consequences to your eyes are way too big to work without glasses.

[@mtwa48]

@@MBcreates I just received the same machine and I've been very careful (I set up a camera and watch it on a TV Monitor on the other side of the garage with my back to the engraver) and have also put pieces of foam on either side to keep the light in. The reason I ask, is I had inititally turned on the engraver and the light dot comes on right away, which i certainly looked at the dot on the bench, and also when I focused lens. (I had assumed it was low power) I have no symptoms, I just wish these things were more clearly obvious from the packaging and instructions. Your video is great. I am a cameraman by trade and always appreciate youtoubers who take the time to frame shots and tell a story though their pictures rather than wobbly cell phone footage and talking over the top. Great work :)

[@MBcreates]

Great to hear that my video skills and storytelling are appreciated by a professional ;) Do you have any feedback to help me improve?

[@ahmedkhamis3502]

thanks for the videos , it's very slow for the work

[@jhonymarin6813]

what operating systems do you need?

[@MBcreates]

The software that came with the machine can be used on mac and windows.

[@esquadraobrocante2373]

É possível gravar em metal?

[@dunichtich100]

Nice project as always! 😊👍 ...but I ask myself everytime which country your accenct comes from? 😅

[@MBcreates]

Thanks! I'm from the Netherlands.

[@lubimayacerts]

Hi , can you please make a test by engraving characters on the keycaps of laptop keyboard especially black color keyboard , so that we can see if it can engrave on them , thank you in advance

[@platalibertad9177]

Dutch?

[@guangzhouminxuelectronicte1242]

Cooperation request: Hi dear sir,could you tell me how to contact you?we want to cooperate with you,look forward to your reply,thank you.

[@gioben5444]

Try making your own!

[@i0use0reason]

I wish I had watched your vid before I bought one , 2 weeks ago! It's too slow for production!

[@cheatcodeanuj4511]

can print logo ?

[@deadbodies5838]

Layshers boorn tha wooodsh👌

[@Michael-kv9bg]

Lekker accentje maat!

[@wholikesthis]

LUFFY