MBR2GPT: Cannot find OS partition(s) for disk 0

[@mattscomp]

The great thing about these videos is the explanations provided. Everyone that watches is learning. Much of what you find with guides online is just a "hey do this" and "now do that" The viewer has no understanding of what this or that means. I for one really appreciate this resource. Thank you again sincerely.

[@brett2681]

THANK YOU!!! I spent the entire day trying to convert my MBR drive to GPT but could not find a way past the "cannot find OS partition" error. Your video contained the answer that I could not find elsewhere despite hours of searching. I had previously cloned the OS from HDD to SSD without the recovery partition. I'm subscribed!

[@itarmy2778]

Glad I was able to help

[@jlg77]

I had this problem with the missing recovery partition. To solve this problem, I upgraded Windows 10 from version 20H2 to 21H1 and Windows Update created a new recovery partition automatically. Then I was able to use MBR2GPT to convert Windows from legacy to UEFI bios with secure boot. Now it's ready for the upcoming Windows 11.

[@louf7178]

Thank you VERY MUCH for the complete follow-through explaination of how to handle the missing recovery partition for MBR2GPT. I successfully converted the partition after the operations!

[@didoortiz1048]

Complete life saver. Thank you for taking the time to explain things and and showing each step. Sub for sure

[@itarmy2778]

Thanks for the sub!

[@DrGreenSA]

did you manage to boot from your drive after the conversion was successful? im getting a no boot device detected? i have changed to boot to uefi in bios

[@sjn456]

@@DrGreenSA Yes, but had to enable secure boot in the bios: Press F2 or Del to get into the BIOS and turn on secure boot. After Windows 10 boots as desired and can pass the upgrade to Win 11 tests. Yea!

[@TurtIedd]

FINALLY. I had this issue MONTHS ago and decided to see if I can convert it again. So many resources online did not help but this was exactly what I needed. Thanks so much for posting this!

[@itarmy2778]

Glad it helped!

[@l.m.s.9074]

Thank you so much for all of your videos on the MBR2GPT topic! You made my day!

[@Aljjocol]

Your videos helped me understand a lot from the windows boot system. In my case I had the error "Cannot open BCD for boot volume" which I solved by using the command bcdboot C:\Windows /s Y: /f ALL Where C: is your windows partition and Y: is your boot partition. If you are in full standard legacy bios, the boot partition must be the System Reserve partition and should be active. This cmd installs all bcd files of type uefi or bios to the boot partition so it let us boot windows in the specified mode selected on the bios. I was able to get success validation in mbr2gpt after doing the above command. This videos can easily produce IT skills for people who work on this for a living. Cheers IT !

[@miltosvouros6104]

Hello! Can you please share more details about this solution? I am having the exact same issue...

[@Aljjocol]

@@miltosvouros6104 Hello, did you try the command I wrote? Did it work for you or still same error? Actually that's the only solution I know of, the "/f ALL" option was the trick for me when using bcdboot, you have to execute that line on command prompt in Windows with admin rights.

[@Aljjocol]

@@miltosvouros6104 my mistake, I fixed my bad typo, I wrote 'cdboot' and it's bcdboot

[@Mastermig1705]

​@@Aljjocolhey bro idk how but after doing the same thing u said like 5 times it worked on one and i got to boot it, thank u ♥️

[@Aljjocol]

@@Mastermig1705 😉❤️

[@Bo2atps3]

This after hours of searching and trying new things. This video fully fixed my issues!!!!!! thank you for your knowledge and wisdom of windows OS I appreciate you so much.

[@wagnervr]

Hello! I'm from Brazil and I would like to thank you for your video. I managed to make my disk with a GPT partition and I managed to activate the UEFI Bios. Thank you very much!

[@itsxtra8144]

THANK YOU SOOOOOOOOOOO MUCH! You just saved me from so much frustration. I ended up copying the recovery file from my laptop over to my desktop and then was able to mbr2gpt. Now i can finally get windows 11 and actually use REBAR for my gpu! :D

[@mariobardi4074]

EXCELENT Explanation!!!! I spend an entirely day trynig to solving this until I found your video, thanks a lot!!!!!

[@ultra-mn3kd]

Finally the solution to my problem. I had to delete recovery partition because mbr2gpt doesn’t work if you have more than 3 partitions. Thank you!

[@itarmy2778]

Welcome!

[@tijmenh974]

All of the videos on this topic were of amazing quality, thank you!

[@itarmy2778]

Glad you like them!

[@Gilmors]

Guy, thank you so much for so useful tutorial... I've been struggled with a bunch of errors while trying to convert my disk with win 10... only your genius tutorial allowed me to get rid with this issue (sry for my English, it's my first steps...)

[@itarmy2778]

Glad I could help!

[@mateo1.1]

Thank you. Finally, after 3 months, the working answer was found. (Today I had 3 errors and all solutions I found out on your channel). I am very grateful to you. Bless you.

[@itarmy2778]

Glad it helped. Bless you too.

[@stephenhammond9793]

Excellent video! Saved me loads of time upgrading to window 11.

[@itarmy2778]

Glad it helped!

[@MADhaseX]

Sometimes, when cloning from an old drive, the partition becomes "inactive"... when using mbr2gpt from a WinPE Drive, it will also fail with "Cannot find OS Partition....". The Boot partition (the drive with windows on) must be marked "active" on the mbr-disk or the mbr2gpt will fail. Marking active can be done with diskpart too... (just "sel par #", and then "active")

[@SaynYT]

Whatever I do I can't find Winre.wim file

[@ProjectStorm]

Listen, YOU ARE GREAT! You are the only one who has resolved my issue. I subbed and liked this. Your methods simply WORK! Thanks.

[@itarmy2778]

Glad I could help! Thanks for liking and sub 😊

[@SolidReader]

THANK YOU! THANK YOU! It took me more than 6 hours but resisable BAR is ON!

[@itarmy2778]

WELCOME! enjoy!

[@andreypatrick9489]

Deleting recovery partition through bcdedit /delete totaly worked, ty man !!!

[@FredMan_]

my disk with Recovery Partition does not have that hidden file...

[@BanhChui1968swe]

Is there a way to switch places of disk 0 and disk 1? My windows boot is on disk 1 (SATA SSD) and so is the recovery partition. However the active partition is on disk 0 (my HDD) and when the pc scans, it scans disk 0. So when the trying to mbr2gpt, I would like to switch my disk 1 and disk 0 so that the recovery partition can be found. Also because the windows is installed on my current disk 1. Is it possible to do that or do I have to create a partition on disk 0 because that's where the "active" partition is.

[@Drag0nStorm1]

What If.... I've literally deleted both the OS partition and the Recovery partition and created a new disk from that unallocated space. But now have no windows partition. Why can WindowsPE run all of MBR2GPT and yet suddenly require an existing OS partition to start the job? any workaround?

[@beastfinger4740]

Thank you. It's funny that I know just enough about working on my PC to get myself into this kind of trouble lol.

[@sasso3844]

no, even after deleting my windows recoverysequence code and following your other videos such deleting the recovery partition and creating a new one (only a 3rd one) which I could only create with around 1,86GB instead of the 10GB like you did in the other video, but even then with a new partition on C the "mbr2gpt /convert /allowfullos" still failed and says "Cannot find room for EFI system partition" Are the 1.86GB not enough for this conversion? But why can I not create a partition with more than that, the command shr minimum=10240 failed, I tried everything, only around 2GB worked.

[@Wborzuuug]

Did you fixed that? I have the same problem let me know please

[@rotorvision]

Tanks dude! Thatcher was helpfull. First error was the -validation failed for disk 0-. The erworbenen note said that the last Partition was to close to the end of the disk. I deledet my third/ last Partition and resized it to c:. After that i got the -no OS-Error. Maybe with Ur solution it could have worked in the first place.

[@felixgonzalez9776]

Did the exact same thing. Oops.

[@dimas.subaktianto]

after efi partition created so the unalocated partition can't expand by c partition?

[@ravenn0us]

Hi! How do you convert an ssd drive to gpt while installing windows 10?.. There used to be a Windows 7 Os installed on it with 2 Mbr partitions (Reserved and Main) and an OEM partition that's GPT..I always get an error while trying to convert it. Thanks in advance.

[@itarmy2778]

Hi Ravenn, MBR and partition and GPT partitions cannot co-exist on disk.

[@justynokelly1655]

I believe when I was trying to move my windows to my SSD that I messed up in this process. This has enabled me to have two separate drives that have active status and I deleted one of them. I am not running into a dual entry or dual operating system, but I also have no deleted a recovery drive yet I cannot convert or validate my drives. This drive is active for me along with another drive and therefore I cannot delete. I have followed the instructions on this video to no avail of fixing my error "Cannot find OS partition(s) for disk: 1"

[@Ubezi]

literally my exact situation

[@tomrp]

Thanks a lot for sharing this solution, I was having a very hard time to convert it in order to do a system image .

[@itarmy2778]

You are welcome!

[@koukyou16]

私もこのやり方で変換できました。ありがとうございました。 i was able to resolve the same error. thank you so much fron japan.

[@itarmy2778]

You're Welcome!

[@xTruMB]

A very good explanation. Thank you very much!

[@itarmy2778]

Glad it was helpful!

[@johannessaliba3795]

I have the wimre.wim file and enabled reagentc /enabled but when i type mbr2gpt i still get Cannot find OS partition ...

[@johnford3825]

Thank you for your excellent video. It gave me the solution to fix the mbr2gpt error and eventually load Windows 11.

[@itarmy2778]

Glad it helped

[@DrGreenSA]

ive watched a few of your video's they are super helpful thank you so much! Edit: After the conversion was successful i was not able to boot from the drive. just got a no boot device found error. this is after setting to UEFI. any suggestions?

[@itarmy2778]

Thanks for watching. Change disk boot priority.

[@jqlio18]

This is the best video and explanation I found. Thanks a lot. Everything worked!

[@itarmy2778]

Glad it helped!

[@GlasgowIsBlue]

FindOSPartitions: Cannot open BCD for boot volume. This is my issue its showing in setuperr, any fix?

[@Niconelli12]

I deleted the entry, but the "cannot find OS partition(s)..." error still prompts into my cmd. Now "reagentc /disable" shows "Windows RE is already disabled", but the entry recoveryenabled has the value "yes" and a direction {d37c...}. If I try to delete that direction, cmd shows "the system can't find the specified file". I'm stuck :(

[@itarmy2778]

Please share the error log

[@Niconelli12]

@@itarmy2778 I solved the problem by using a tool called Eastus (it's a GUI for partition management or something like that, I just performed the MBR to GPT convertion in it). Your video were still very userful to me because i learned a few intersting things. Thank you for answer me!

[@shivamkss90]

For dual boot OS you suggested to delete the 2nd entry in msconfig, how can I add it back later? I have dual OS windows 10, one on my ssd and one on hdd, as you suggested I would delete the entry for OS in SSD, but how can I add it back later so that I can convert to GPT on both.

[@JALA578]

Not sure if its way to late, but go to my pc and eject the other ssd/hdd you aren't using, or physically unplug the other drive.

[@gzorblubz]

Thank you so much! As a lot of other people here, this is the only solution that worked for me, after trying quite a lot of things!

[@itarmy2778]

Charlie, Thanks for commenting

[@ronnelparras]

After I disabled the recovery, at the time i will enable it. It was not found. Help please

[@kinecty111]

I followed every step in the video, I got out my laptop and copied the file onto a usb and pasted that into the recovery folder on my PC where I'm having this issue and after everything I'm still having the problem "cannot find os partition"

[@Barro1995]

You saved my sanity! Thank you!

[@itarmy2778]

You're welcome!!

[@Grammelknoedel]

Thanks for the video, my problem is that my OS drive (SSD) is disk 1 while my data drive (HDD) is disk 0...anyway to work around that problem?

[@itarmy2778]

You are welcome. No need to specify the disk parameter, by default it will convert disk 1 to GPT

[@legomes22]

(Brasil), mesmo fazendo esse procedimento aparece o erro: Cannot find OS partition(s) for disk 1" erro

[@alistair-01]

THANKS!! Helped me fix my problem after many hours wasted on the internet. Great job 👍🏻

[@itarmy2778]

Welcome

[@skyview5833]

It's working fine... It's already in gpt but my windows can't boot in UEFI and Legacy....

[@Shiroror]

why does mine show i only have 1024kbs of free space in my 2 disks

[@smellos58]

Ótima dica... não sei se cabe aqui...mas.... tô com problemas para entrar na BIOS do meu windows 10 notebook ACER Aspire v5....não entra, já tentei todas as teclas possíveis...isso foi após alterar para legacy...e colocar f12 para entrar no boot e instalar o PrimeOS na partição correta, como posso voltar para UEFI se não consigo entrar na BIOS nem no Windows, como faço retirar o dual boot e voltar tudo ao normal? Se puder ajudar agradeço.... forte abraço 👍

[@itarmy2778]

Please press F2 key to enter firmware settings.

[@MADhaseX]

Another thing to say: mbr2gpt is a nice tool to recover from boot errors happening with old mbr disks... just use the tool to convert to gpt and all the erros will be gone.

[@erictrout8277]

my disk 0 is not my c: drive its my storage drive and i dont have my OS on that disk why is it pointing at disk 0 anyway i cant figure this out.....

[@ahmedgamal1861]

same problem

[@kingmiitch]

That 100% worked, only tutorial that fixed my issue.

[@itarmy2778]

Good to hear

[@Kata-dq9yr]

ny boot partition is in disk 1 how can i transfer it to disk 0?

[@itarmy2778]

kzbin.info/www/bejne/horVhXekqpigrpo

[@LukaKvira]

Great video, however it doesn't seem to help me in my case. The issue I have is that my OS is installed in SSD, however in disk management Disk 0 is my hard drive which is also a primary disk for some reason, and Disk 1 is my actual SSD that OS is installed on. I would appreciate if anyone could help me with this

[@itarmy2778]

Thanks Luka, Here is your solution kzbin.info/www/bejne/horVhXekqpigrpo

[@hassan5067]

i suuccesfully followed your instruction and deleted the recovery file , but when i try to convert it still gives men the same error , i have 1 ssd and 1hdd installed , windows is located in ssd , but the hdd is labeled as disk 0 in the disk managment , and there is no recovery partition in the hdd , how to fix it please help

[@itarmy2778]

kzbin.info/www/bejne/horVhXekqpigrpo

[@Mukatutu]

Did you ever solve it, I'm basically in the exact same boat as you, My Disk 0 is my HDD, My Disk 1 is where my SSD and boot partitions are, deleted recovery partition and all but mbr2gpt still says "cannot find room for the efi system partition" even with 563mb of unallocated space on the drive. What a frustrating issue, man.

[@hassan5067]

@@Mukatutu ikr , i kind of fixed it , it required some tweaking in the bios using cmd during windows installation, and after that i did mbr2gpt and it surprisingly fixed jt

[@Mukatutu]

@@hassan5067 Do you remember what you did...I'm kind of stuck here :(

[@lazycrockett6605]

Do you do this while windows is running or in recovery mode?

[@itarmy2778]

As you can see I did it while windows was running but you can do in recovery mode also.

[@dpchap5]

I followed along and now I don't have a recovery in my disk management and my OS is only booting in Windows boot manager. Do you have any advice for how I can get this changed so I can boot only from my SSD? I am really struggling... I changed from mbr to gpt, but the issue was it said it failed to updated reagent.

[@itarmy2778]

Hi Daniel, SSD should be first in the boot priority and disable Legacy/CSM from BIOS

[@dpchap5]

@@itarmy2778 I think I disabled Legacy a couple months ago when I was making sure my PC was able to get Windows 11. I actually followed along with several of your videos and now my PC is able to get Windows 11. You are a genius. My only concern is that Windows is booting up with Windows Boot Manager. Currently my only boot option in BIOS is disabled and it is Windows Boot Manager. Should I be concerned about this?

[@itarmy2778]

Boot Manager appears when you have multiple operating systems. What are the options appearing?

[@dpchap5]

@@itarmy2778 in my BIOS Boot Option #1: Windows Boot Manager (PO: ADATA SU650) There are no other options.

[@itarmy2778]

Run following command as admin bcdedit /set {bootmgr} timeout 0

[@abidislam9425]

In my case it saying cannot find os for disks 1

[@BobRissler]

Worked great! Thanks so much for posting this!!! 😃

[@itarmy2778]

You're welcome!

[@jerrypele]

This solved my migration to GPT issue; thanks!

[@thomasfuller6212]

I want to convert to GPT, But I do not have asystem reserve partiton. When I cloned the disk I must have missed a step

[@itarmy2778]

No issues, either delete the recovery environment or enable the recovery environment

[@parthprajapati2948]

data of c drive is safe in this proces???

[@itarmy2778]

Yes, but backup just in case

[@parthprajapati2948]

@@itarmy2778 my laptop is not starting after this process, it is saying reboot and select properboot device............. Like error

[@kristianosborn5308]

Very good video fixed my problems, thanks!

[@itarmy2778]

Glad it helped!

[@szpyroblast]

This helped a lot and allowed me to update from win 10 to 11. Thanks!

[@itarmy2778]

Glad it helped!

[@Jarthalamew]

I still got the error what do i do

[@itarmy2778]

error log please

[@swnheart]

genio me salvaste, todo el dia sufriendo para pasar el disco a efi al fin :D

[@OfficialFo]

For anyone that still needs help: Run the following command as an administrator: bcdboot C:\Windows /s C:

[@Alakazam_WR]

I deleted my recovery partition and still it didnt work, it says Cannot find OS partition(s) for disk 1 (Yes my C drive is in disk 1). Someone please help!!

[@Alakazam_WR]

Solved. Had to copy my working EFI boot data to a place where mbr2gpt could find it with the command bcdboot c:\Windows /f bios /s c:

[@cardink3170]

@@Alakazam_WR how to do that can you help?

[@NexKalthio]

This video saved me. Thank you so much! 😊

[@RipSNake]

Thanks for this great piece of knowledge ! You helped me so much!

[@itarmy2778]

Happy to help!

[@Xaltorez]

Hey IT Army.. could you possibly help me? I cant for the love of god change my os drive to gpt. I've tried everything you've done in this video but it wont let me.

[@itarmy2778]

Hi, what is the issue? please share the error log and disk partition screenshot

[@Xaltorez]

@@itarmy2778 Where can I send you this?

[@Xaltorez]

Could I possibly add you on discord?

[@itarmy2778]

Please paste the logs in comments

[@Xaltorez]

@@itarmy2778 I've fixed it with the help of one of your other videos. thanks!

[@theqaz1828]

Unfortunately I'm the sad story as I followed the steps deleted the partition and still had the error

[@petcha]

very cool - with that explaination it works

[@itarmy2778]

Thanks for watchin Peter

[@lazycrockett6605]

Honestly after messing around with windows for half a day, the best option is just to get the recovery file from another windows pc, I got it off an old windows 8 laptop that I rarely use and bingo, problem solved.

[@prosmius2481]

Didnt work,so i just deleted everything for nothing basically

[@defferensal]

Короче если кто читает у меня была похожая ошибка но только проблема оказалась в том что просто я не мог создать новый раздел на диске хотя место было и было только 3 раздела. Вобщем проблема решилась тогда когда винда смогла сама создать раздел и все сконверитровалось

[@timiboy19]

Awesome mate, thanks a bunch❤

[@ahmedgamal1861]

when i wright reagentc /disable this is the result : REAGENTC.EXE: Windows RE is already disabled.

[@jvormittag731]

Really awesome video! you saved me hours of trouble!!

[@itarmy2778]

Glad I could help!

[@iAmTechnique]

you're awesome man, nice video

[@BirBilgin]

One man army. Thank you so much

[@itarmy2778]

You're welcome!

[@marcoreynavillela1930]

Excelente Exposición¡¡

[@deenpc_life]

my reagentx.exe is not found, also my reagent is 😢Reagent_Merged

[@Hiramwebb]

Thank you! you just saved the day!

[@errolhowland4013]

I had to stop and replay many times as I followed along on two PCs, but FIXED this issue totally, gave it a thumbs up, commented and subscribed, thanks again!

[@itarmy2778]

Glad it helped! you are welcome!

[@The2peanuts2]

Thank you very much!!!!

[@itarmy2778]

You're welcome!

[@farfanSK8]

thanks dude... it works.

[@itarmy2778]

You're welcome!

[@isravel5154]

Thank you so much

[@itarmy2778]

You're most welcome

[@ts_raider7724]

this is a tutorial is made thxs a lot broo

[@tarcisiogoulart5399]

thank youuu so much!

[@itarmy2778]

Welcome

[@Jays1ndone]

Thank you!

[@twanakawa5551]

thank you

[@jvms97]

you are awsome!

[@itarmy2778]

Thanks!

[@Ramunas001]

Worked! Thanks

[@itarmy2778]

You're welcome!

[@prajwolgyawali6770]

Thank you.

[@itarmy2778]

You're welcome!

[@egemenartuk]

hey man, great video but I need some help. My disk D is asigned as disk 0 and disk C is asigned as disk 1. I belive that why I am facing this problem. Do you know how can I fix thix?

[@tandaniel4732]

Thanks 🙏

[@itarmy2778]

You’re welcome 😊

[@nw0]

you helped mee .. thaank you

[@itarmy2778]

Thanks for watching