MC2SIO for PS2 Review - Better Than USB Loading?! (MX4SIO Project)

The MX4SIO project is a newer development we've seen in recent years which allows users to adapt a SD card or microSD card for use on the PS2's Memory Card port. While this isn't intended to be a replacement for a Memory Card, one of the biggest benefits we look at in this review is the ability to load PS2 games through the Memory Card port using OPL! While OPL has several great methods of loading PS2 games through an internal hard drive, network share, or a USB drive, the last one mentioned there seems to be a favorite despite slower read speeds. This project changes that by combining the convenience of USB loading with higher read speeds, eliminating longer loading times and choppy FMV playback known to plague USB loading.
This review specifically delves into Helder's own take on the MX4SIO with the MC2SIO, a $20 USD pre-built solution that can be used for OPL and loading PS2 games once you bring your own properly configured microSD card. Helder's Game Tech was awesome enough to send one of these over to the channel to review, so in this video we take a look at his MC2SIO adapter and see if this thing is really worth the money?
Review Disclosure: This is not a sponsored video. No money was exchanged for the hardware shown in this video or promotion. The product reviewed in this video was provided for free by Helder's Game Tech for purposes of review.
Purchase the MC2SIO here!
www.heldergametech.com/shop/p...
#PS2 #MX4SIO #MC2SIO
This video has been made with Fair Use in mind and has been created as an educational piece of media.
--------------------
Timestamps!
0:00 - Introduction
2:20 - USB is best, right?
3:35 - How can we address USB loading's problems?
4:47 - MX4SIO Background
7:11 - MC2SIO Review Disclosure
7:37 - FreeMCBoot Recommendations
9:08 - Using Specific OPL Builds
11:01 - The Good Stuff
15:11 - The Bad Stuff
19:45 - Final Thoughts
--------------------
Product Affiliate Links:
Fat/Phat PlayStation 2:
Amazon - geni.us/PhatPS2
eBay - ebay.us/LP64VK
Slim PlayStation 2:
Amazon - geni.us/aAlSz
eBay - ebay.us/l7WzTD
PS2 Memory Card:
AliExpress - s.click.aliexpress.com/e/_dXt...
Amazon - geni.us/DXkL
eBay - ebay.us/Mkl1vL
microSD Card:
AliExpress - s.click.aliexpress.com/e/_Ao4Q6n
Amazon - geni.us/1AKxG3J
eBay - ebay.us/Wi5qLp
Video Hardware I Use:
US - www.amazon.com/shop/mrmario2011
UK - www.amazon.co.uk/shop/mrmario...
--------------------
Additional Sources!
MX4SIO/SD2SIO Project Thread:
www.psx-place.com/threads/mx4...
MC2SIO from Helder's Game Tech:
www.heldergametech.com/shop/p...
FreeMCBoot Card from Helder's Game Tech (With OPL Downloads):
www.heldergametech.com/shop/p...
MX4SIO/SD2SIO Compatibility List:
docs.google.com/spreadsheets/...
How to Update OPL for PS2:
• How to Update OPL for PS2
How to Play PS2 Games from USB Using OPL:
• How to Play PS2 Games ...
--------------------
Social Media & More!
Discord: Discord.Me/MrMario2011
Patreon: / mrmario2011
Second Channel: / ipsychozoa
Twitter: / mrmario2011
Facebook: / mrmario2011
Instagram: / mrmario2011
Twitch: / mrmario2011
--------------------
Song Information
Artist: pyama
Song: distant transmission
Soundcloud: literalbagoftrash
Link: / literalbagoftrash
--------------------
Any links specifically listed as affiliate links give me a small monetary kickback at no extra cost to you and no influence on the content.

[@tidjane2001]

I was really suprised to hear that the MC slot is faster than the USB haha

[@MrMario2011]

Same! Seeing is believing.

[@joshpollard9098]

​@MrMario2011 can you save game data yet if not could we be able to use a multitap along with the opl soft mod

[@markusTegelane]

​@@joshpollard9098you can always use VMC in OPL for game saves if you want

[@tobiaswehner6836]

Well it wasn't surprising at all because it's USB 1 and the memory card slot is especially designed for loading and saving, USB is designed for data transfer, it's a bit different from loadind/reading/saving. But no shame in not knowing because we learn new things everyday of our lives

[@cleangoblin2021]

If only ps2 had us. 2.0😂 The slim could have been a monster at backup loading

[@cheekyphuzz_thegod8558]

You do really good work on this platform, dude

[@brngrofdeth]

This is great man! Please keep us updated when this improves. Love and blessings from Ontario Canada!

[@MrMario2011]

For sure!

[@brngrofdeth]

@@MrMario2011 Right on brother! Your channel is honestly the best man! Total respect!

[@TheOriginalVersatile]

Love the shoutout to the online spreadsheet. I started it off to help the PS2 community 😊

[@tnaplastic2182]

Based on the sheets Anakin94 and I made! 😁

[@TheOriginalVersatile]

@@tnaplastic2182 Yes thanks for starting it off!

[@breakpack]

Got mine coming in the mail! Can't wait to try it out!

[@akilluminati47]

How'd it go?

[@viejodelentes6079]

It just occurred to me, wouldn't the saving game progress issue be solved by splitting the micro SD in two partitions? I have an external drive with two partitions and when you plug it in it shows two drives, if that was possible in PS2 one partition could be the memory card and the other the storage where you put the games.

[@chemergency]

Compatibility is the biggest filter when it comes to OPL, but keep in mind that sometimes versions of games from other regions will actually work, and if you're really lucky they'll support PAL60 output which means they'll work okay on a NTSC console. 2024 Update: I've since gone from this to a 1TB HDD with a SATA adapter on my phat PS2 and the difference is night and day. I tested out more recent builds of OPL with my MX4SIO card and sadly haven't seen much improvement in the realm of compatibility so I personally can't recommend it even if the cards are cheap, the money saved won't save much in terms of the time spent fiddling with different versions of games hoping they won't break after a certain point or fail to save.

[@chemergency]

At-least ESR still proves to be an effective alternative when OPL fails. Crash Bandicoot Wrath of Cortex apparently won't budge on OPL but will work on an ESR-patched disc provided you convert it to DVD format.

[@terrata1]

I don't understand compatibility issues with OPL..isn't it supposed to run original PS2 hardware from the actual console or is it an emulator?

[@chemergency]

@@terrata1 I think it uses some kind of software layer to circumvent PS2 copy-protection without a modchip, similar to ESR. Even with a hard drive compatibility issues in OPL are very prevalent, but right now it's the closest thing we have to an ODE solution.

[@terrata1]

@@chemergency Thanks for the reply

[@ButcherGrindslam]

PAL PS2 also outputs NTSC instead of PAL60.

[@viejodelentes6079]

The USB method is not too bad, the CD based games run flawlessly, and I've found some DVD that also run great, like Summoner and Rumble Roses.

[@BIGwillTHEGAME]

I heard about this a few days ago. It’s great that people still find new things to do on the PlayStation 2 two decades later. I still have my PlayStation 2 fat with HDDOSD and Free Mcboot.

[@bsam.9]

​@@AhmedAnssaienPlays Are you arabic?

[@bsam.9]

@@AhmedAnssaienPlays You wrote a newspaper for a half line question okay I will read😂😂

[@bsam.9]

@@AhmedAnssaienPlays Well, thank you for writing a newspaper for my question. And the fact that your English suggests that your skin color is very red and you live in Sonora desert and I wish to be like you in English because I write this in Google translation😂😂😂😂😂 and I am from Saudi Arabia🇸🇦😅

[@bsam.9]

@@AhmedAnssaienPlays ماشاء الله 😳 I am 17 years old and I only know English (hello) (nice to meet you)😂😂

[@ShadowCreep]

I managed to get one and it's one of the best purchases I've made for ps2

[@hyzenthlay7151]

I read that once the game is loaded, you can remove the FMCB cardand reolace it with a normal memory card for saving games, and just to remember to switch the cards back before changing the game.

[@Trane434_mx]

After the funtuna vid for ps2 slims, I purchased a 256mb card that was 2 128mb cards with a physical switch. I loaded the mod on one and my saves on the other and all I do is just flick the switch and It works just fine

[@chemergency]

I haven't had much luck getting the latest version to properly detect memory cards, but I did find a workaround. Allegedly only the BDM3 version of OPL supports saves currently.

[@fabimawn]

You could save your games on the Magic gate freemcboot card itself no problem. That's how I save my progress

[@YEY076]

Yep, it's true, that's how i save My Game progress. Once the OPL is loaded, You can switch the MC for another normal MC (in slot 1) , then load any Game from the MC with the MX4SIO (in slot 2) and there You go, once in the Game, You can save your progress normally in the MC in slot 1. Extra tip : Once You load for the first time the OPL, and do your adjustments and settings, it Will save the config file (of the OPL) in any media it detect, so is better to have only the FMCB MC plugged in, so it save config file there once it's done, then You can plug your MX4SIO and go.

[@spandi23]

@@Trane434_mx I think I have the same memory card, are you saying that you mod one side of the switch then just switch it back for saving?

[@Lai43]

I was thinking this kind of method like ten years ago. But, I can't seem to get around with it. And now, things are happening. I feel excited and happy about this mod. Eyes got a bit teary.

[@MrMario2011]

Gotta love when the feels come out through mods 😊

[@batterypwrlow]

I wanna see a speed test between this memory card flash reader vs game disc. Seems like they might be the same speed.

[@TheRestartPoint]

Thanks fir the review. Was amazed to hear about this recently, modding a Phat with an HDD is cool but its actually quite a pain putting the games on. if this has the same or better OPL compatibility than using an HDD then it's the best method there is I think. And it works on the nice compact slim machines! Incidentally, if you have a Phat PS2 you never need a FMCBoot memory card, you can set up FreeHDBoot & OPL from scratch on an HDD, then play the games off this MC2ISO

[@MrMario2011]

For sure! It's a slick solution.

[@poodudeelite]

The downside is game compatibility. Nothing beats the hard drive method for that. Hopefully they'll improve it over time.

[@DigitalAsshat]

@@MrMario2011 make a comparison video with a Slim with HDD (Micro SD). A guy from Greece makes them, his YT channel is called Gou Mods. Bought one from him via Etsy and I love it.

[@ultenhiemer]

Honestly, I don't get why Sony hasn't done more to bring PS2 games into a HD space. Right now, the options I use are my launch model PS3(s) and emulation. I recognise that emulation renders the PS2 better. But the PS2 hasn't had anywhere near as much official support as the PS1 has... Even with it being the highest selling console. I still wish Sony would have done a PS2 mini console (Like with what they did on the PS1). I would have ripped their hand off for that... But because the PS1 mini flopped so badly, that ever being an option for the PS2 also drifted into a dreamspace. All I am saying is, the PS2 deserves some love also. I like the tech here but with the low quality resolution of the PS2 console on modern TV's I wouldn't really go for it. HD has kinda spoilt me, in the sense that I won't really go for anything else.

[@MrMario2011]

For sure. If only PS2 classics on PS4 got more love.

[@BIGwillTHEGAME]

I’m looking forward to playing PlayStation 2 games on the go using Steam Deck and PCSX2. I may also hook it up to my tv. I have a PlayStation 2 fat with HDDOSD/Free MCboot and a jailbroken PS3 slim but I like playing them with a higher resolution as well.

[@Horrid_Gaming]

Last time I checked they were sold out, nice to see you got your hands on it.

[@MrMario2011]

This was sent to the channel for purposes of review.

[@in2green78]

I'm surprised the inability to save your games isn't a total deal breaker for more people.

[@dachimp4879]

Hey, given that you use OPL to launch and play roms from the MC2SIO, would it be possible to somehow launch and play other roms such as nes, snes, etc stored on the MC2SIO? Or is it strictly ps2 roms?

[@cosmickatamari]

Literally in the middle of soft modding my kids ps2 and came across this. Hope you've been well.

[@ErikIversenNU]

sick shirt! good guide i didnt know about other entry methods

[@MrMario2011]

Appreciate it!

[@kanekiyoshimura5707]

Oh man I lost this channel happy to have found it again

[@tnaplastic2182]

Saving now works in-GUI as well as in-game on the newest OPL Betas! OPL got ExFAT-, ZSO- and Fragment-support! :)

[@tnaplastic2182]

@@sucaNaitoraven951 I can't post links... KZbin automatically deletes the comment if I do...

[@chemergency]

Also- the compatibility submission link in the Google spreadsheet doesn't work for me, but I tried the Japanese version of Quake III Revolution on my North American fat PS2 and it worked. It runs at 60hz and most menu text is English which makes it the ideal version to play in OPL since the North American version unfortunately just doesn't work (it was notorious for long loading times which were apparently fixed in international revisions so that likely has something to do with it) and the PAL version doesn't support PAL60.

[@Punmaster9001]

You were not the only one who put the micro sd card in and then had to get it out of the casing, thankfully I was able to get it to slide out enough that I could pull it out the rest of the way. The only issue I seem to be having with it is I can't get it to read the micro sd card which is a SanDisk (figures I only have those on hand) which according to Helder's website aren't 100% compatible with it.

[@Gaming-Enthusiast]

Great video , still have to do my ps2 fat 👌👌👌, on the pre order list

[@DarkSphinxx]

wow how in the world is memory card slot faster than USB? You guys in the modding community are just genius and im so grateful

[@vergil1155]

Now there's one more thing I wonder. How fast is the port really? Is it USB 2.0 level or an in between of 1.1 and 2.0

[@ModzvilleUSA]

Nice vid duder! I yoinked one of the aliexpress clones of these that I'm yet to test yet as these helder ones are super hard to get ahold of. I really want to see if I can get it working on a 90000 with a modbo installed using matrix to boot directly to OPL. Which entry points have you tried so far with this? You didn't notice any issues?

[@MrMario2011]

Just FMCB and OpenTuna, as long as you can get a compatible build of OPL to run it should work.

[@ModzvilleUSA]

@@MrMario2011 great news! The documentation I’ve seen so far made it seem like it only worked with magicgate fmbcs. I figured that was unlikely but haven’t gotten around to trying it out. Big ups on the vid and info, wonderfully done! 🤘🏻

[@Pharexus]

thank god i found this video, opl settings not saving and games not being able to read memory cards is a problem with the current official opl version but helder's site has a working version thankfully

[@tnaplastic2182]

Get the newest official OPL Beta! ;)

[@tmifb9926]

This is great to replace USB game loader for PS2 since PS2 loads off USB too slow but with this it's perfect like running off disk! Edit: Carl's reply to this comment below apparently not for all PS2 models!

[@chemergency]

Like running off a disc with a few scratches but still much better. ;)

[@travisf2660]

I still have my ps1 and ps2 that I soldered a Mod chip in when I was a kid. When blockbuster was a thing, they had an unlimited pass and you could rent 2 games at a time. I would go there multiple times a day and back home to burn backups. Seeing these usb and sd card options is pretty crazy how far things have come. Cheers

[@carllapointe6678]

It’s a terribly unknown secret that PS2 slim systems with the Deckard I/O chip have surprisingly fast USB ports, plenty fast enough for loading PS2 games, great OPL compatibility too. Deckard I/O chip have been used since the SCPH-750XX model ( playstationdev.wiki/ps2devwiki/index.php?title=IOP/Deckard ) So... The PS2 slim SCPH-7500x, 7700x, 7900x and 9000x all have a Deckard chip in them which replaced the old MIPS R3000 chip of the 700xx and older models.

[@tendosingh5682]

Or faster yet load via network port (smb share router + usb port)

[@Ir1shM3talhead]

I see alot of potential for this espiecally in regards to running PS1 games since the PS2 won't need to use the MIPS R3000A chip for IO therefor it should be possible to run PS1 games off it instead but I guess that means we'll need a update from OPL to make that possible.

[@tnaplastic2182]

It still uses it for IO.

[@ToxiicZombee]

I finally ordered mine it was so hard I had to wait forever cuz it was always out of stock but I finally got one so excited!!!!

[@MrMario2011]

Hope you enjoy it!

[@jakapratama2590]

in my opinion, MX2SIO is an alternative to play with LESS hassle compared to using USB, which is we all know it's 1.0, with slightly better performance in FMV playback. But in terms of performance, I'd say either internal HDD/SSD with NA or LAN server is still a better choice. And since it's known working with only specific release of OPL, we don't know if the compatibility for all known PS2 games is covering the game we want to play.

[@ProjectR86]

PS2 has USB 1.1, not 1.0 - I assume that was a typo.

[@jakapratama2590]

@@ProjectR86 Thanks for the correction 🙏

[@ketchup901]

Internal HDD is by far the best. LAN storage is a huge pain to set up, unless you have a Windows server in which case your problem is now you have a Windows server.

[@racheghoul2511]

This is definitely awesome and hell probably is what ive been looking for since apparently my PSP action replay special edition ps2 save loader disc seems to not work,but honestly now the question is though is it better to just get a modded ps3 to do all the great ps2 things or this? Cause ya know i feel like ps3 emulates ps2 really well despite whatever model interestingly enough.

[@ShadowW0lf1]

It's going to be a long time before this is in stock again now that bigger youtubers are covering it.

[@MrMario2011]

Here's to hoping up he ramps up production for it, I believe he's restocking them weekly.

[@larysk227]

Noticed those recently on Aliexpress. Thought I was really behind on the PS2 modding scene. Btw. are you aware of any other devices like the mClassic? I'm trying to setup my PS2 so i can output it to my monitor which only has HDMI in. And I'm looking for a lag free PS2 upscale solutions.

[@_raydreamer]

For more budget friendly options, I will recommend looking into the GBS-Control AIO or the Retrotink 2x multiformat. Both are around ~$130 before tax and shipping. Both have pros and cons. You can build the GBS-Control for far cheaper by buying the parts and assembling it yourself, but you'd need the soldering skills to do it. GBS-Control: kzbin.info/www/bejne/nJ7Jg2OOfpqWsKs Retrotink 2x multiformat: kzbin.info/www/bejne/b6vHcnRjj56ijbs There are other more expensive options, like the OSSC (around $160 after the price is converted to USD) or the Retrotink 5x (~$300). Both of which are more flexible and offer more features with a far higher price tag.

[@larysk227]

@unknown_ Nope. I use internal PS2 HDD for OPL, so I had no reason to get thrm.

[@larysk227]

@@_raydreamer Thanks, I really appreciate the info.

[@zigibogido]

Probably a FAQ, which device are you using to capture the PS2 footage? Looks pretty crisp!

[@MrMario2011]

RGB Scart upscaled to HDMI and an ElGato HD60+ for capture

[@MultiWirth]

but can it actually be used as a memory card? I just ran out of memory and couldn´t create a new savegame, so i started to create virtual mc for each individual game from OPL but ofc. that´s not ideal.

[@kennygarcia5659]

I ordered a pair off of aliexpress, along with a 32gb sd card and FMCB mem card. From what it seemed the shipment already came with all the apps and games preloaded in the SD card, when I loaded it with my PS2 backups installed in the folder the games showed up in OPL but did not run. I formatted the SD card and got the ISOs properly set up, and now the games won't even show up as if it's not reading the MX4SIO mem card though the lights turn on on the card and my mem card ports are reading other mem cards. I formatted two SDs off of a Macbook that formatted it in a MBR partition table in FAT32 format, then reformatted it in FAT32 on windows 10, I'm going to reformat them on linux ubuntu in FAT32 but change it into the GPT partition table. though its supposed to be plug and play and I have seen the cards read games but not play them so unless the cards are defective is there anything I could be doing wrong? Also tested on PS2 v35000 and 39001

[@Falcon5698]

Great little gadget and solution for the ps2 slim owners. A bit of a no go atm while there is no game saving, but once thats solved it will take off more. Im surprised no ODE has ever come out for ps2. Those ps2 phat drives are garbage im always replacing them when i get a faulty ps2 in the shop.

[@chemergency]

You actually can get saving to work with some workarounds, but you have to keep two different versions of OPL installed and it's a bit finicky to say the least.

[@thegroi]

i mean, this can be solved with a memory card on the first slot that serves as boot. then just jam opl into the sd that's going in the dongle on the m2 slot, if you have fmcb just config the shortcuts by going into the mc1 slot storage and there you go

[@ozsen4056]

@@thegroi how can i do shortcuts ?

[@Bringmejoycon]

Building one myself soon, do you need 2 cards? One with mcboot and the other for games? Or can it all be done from one memory card?

[@Bringmejoycon]

Nvm haha I watched the whole vid, understand now. Can't wait to build one just because lol

[@normynorm9503]

Thanks for the video. It helps reassure I setup mine correctly as well. Question: Did you get MVC 2 to work on your ps2 with the adapter? Don’t know which settings need to be on. Mine will not load it. I have a model 75001 ps2.

[@MrMario2011]

I didn't try MvC2

[@intheeyeofvenus4952]

I just bought one of these for my FAT PS2. I know I can go HDD but this was an interesting choice.

[@jvnelvlam00n]

does loading games like this and through the hdd work for the multi-disc games?

[@everettrantanen1732]

One thing you didn't touch on was the fact that the MC2SIO microSD card can be formatted as EXFAT eliminating splitting all the over 4GB PS2 games into pieces. Have you tried it and does it work?

[@richardward5135]

As none else has commented on this. Exfat works fine and no obvious issues with saves either. Just put tomb raider anniversary on which was too big for fat32 / rebooted and saves still there on me card 1. Now just need to order another controller as this one has had it..

[@memzofficial]

Hey Mr Mario ,I have a question ,I got two memory cards ,one is a sony official that has FMCB and the other is a fake one .My question is ,if I manually solder an SD card adapter on that particular Fake memory card in order to load games from it ,do you have any idea if it would work or not ? or MX4SIO should be on a official memory card just like FMCB ? Thanks in advance

[@MrMario2011]

As long as it's built to MX4SIO specifications and built properly, it should work.

[@raptorspy13]

I probably need to mess with mine a bit more, but I haven't been impressed with the functionality of mine so far. So far I had a much easier time booting and running games via the USB.

[@Jaxxonian123]

I haven't been able to get it to work. USB was actually easier...SMH

[@raptorspy13]

@@Jaxxonian123 my experience is similar. I can get some games going, but not as easily or consistent as with USB. Also, I find that the version of OPL that is supposed to work on my Slims does not at all.

[@GrimyGoblin]

@@raptorspy13 what about speed wise

[@masonsteiner6589]

I was curiouse about the mem card loader. Fantastic to see things are coming along. You should check your Facebook messages though.

[@christianmolina6519]

Anyone else having trouble with the sd card showing up with the games? On mine it hardly never shows sd card when I launch OPL. I’ve tried several sd cards including the recommended cards

[@EleventhHourReviews]

any info on saving a game yet? I tried creating a VMC but the game freezes on the opening splash screen every time I try to launch.

[@renatinhoss]

aliexpress is already selling these, with FMCB and OPL combo.

[@RDJ134]

link?

[@akilluminati47]

Yeah link?

[@darknesskillerentertainmen9002]

Will not boot opl at times . Shows black screen or freezes when it doesn't boot up. 🤔

[@loafbringer]

Love the hat and love the vid dude. I like your happiness

[@MrMario2011]

Glad it shows 🤗

[@loafbringer]

@@MrMario2011 it does dude.love the enthusiasm, makes me love being a nerd whos into this specific nerdy shit

[@charleschamp9826]

There are some PS2 games that detect the official hard drive and let you save directly to it. If you had one of those installed could you then save in those few games? I know this is not a solution because most games do not detect the hard drive, but I am curious.

[@moesabawi4437]

Is it possible to install free McBoot onto a USB drive but still have the games load from the sd card adapter? This is so I can use a memory card and not have to keep swapping out back and forth between the memory card and the free McBoot loader.

[@khuntington]

so can you save at all using this option? like... can i go to save my game, and save it to my FMB card instead of the sd card? or are you saying it locks you out of the game save sandbox in general?

[@MrMario2011]

You can save properly these days I believe.

[@saiedaboul-dahab7208]

I got this from Amazon and I am getting black screen when I try to open any app. Also, free McBoot lunches only when I access the browse then exit. Any, idea what I can do to fix this issue?

[@logane1102]

A fat PS2 with an original network adaptor modified with the sata upgrade kit is definitely the ultimate solution, but the mc2sio is a very close second

[@MrMario2011]

For sure. HDD loading is still a favorite.

[@drhax9908]

@@MrMario2011 more so if using an SSD

[@miguelcarneiro1192]

Hi, i really liked this video. I bought an PS2 recently and i want to play many ps2 games but i want to do it on its original speed. Im thinking on buying one FMCB card to play ps2 rom games on my ps2. I didnt decide yet if im gonna use an external hard drive or an MX4SIO sd card to store and load that games. Please tell me if an external hard drive will have the same file transfer speed as an usb drive stick like you show so well on this video, and because of that the games will have the same slow downs as well?

[@masonheath5127]

quick question...I've had the issue with USB loading where you can't load a game and use an accessory at the same time (eg. Singstar) using this, would that be solved?😅

[@SweetBean92]

Where are the specific OPL versions on Helder's site? I can't seem to find them at all.

[@davideunknown8930]

I bought it, it arrived today. With OPL 1.1.0 the ps2 doesn't recognize the port 1 memory card and is impossibile to save. Checking around I found this tutorial, but the recommended version of OPL (the one on this video also) gave me black screen. The device is working, I suppose there's something wrong with the memory card because it doesn't work even if I format and reinstall FMCB.

[@tnaplastic2182]

Try the newest official OPL Beta!

[@BarrickMacready]

Did you use a Multitap and see if having a 3rd memory card would work with saving?

[@xnonsuchx]

Losing micro SD cards in a case is common for many raspberry pi cases too. :-( I’m sure many know of what you speak.

[@haoantraxx]

pls helpme my hhd was not visible on my ps2 slim even i format it fat32 what do you think the problem ?? but if i put usb it work

[@alansmithee2012]

How does the loading time compare to using an HDD or loading games via a network?

[@dumbkoffcrow974]

I'm surprised it took this long when we've been using the GameCube Memory Port for a decade.

[@MrMario2011]

Just gotta get the right people on board 😁

[@emphatic001]

Nice review. I have recieved mine from Helder today. I have some questions. 1. What Micro SD cards are recommended? Sandisk should be fine, right? I'm gonna buy one, so I just want to make sure it'll work... 2. If you put your PS1 games on a USB stick, shouldn't those be playable in OPL? 3. If you create save slots (memory card emulation) on your Micro SD card in OPL, that still doesn't work either? Right?

[@quintin360]

No Sandisk won’t

[@BrandoP3000]

The specific OPL builds on Helder's site just give me a black screen...I've given up on trying to get this to work. Maybe I'll try again in the future. Thanks for the great video, though. Good job!

[@thegothfather8404]

Same here no luck completely irritated at this point usb it is for now good thing I have a lan play setup

[@boogiedownnyc]

I just cant figure out how to get large roms on this thing. I've seen tutorials but I feel like there missing a step.- EDIT your tutorial for USB loading was brilliant. ITS WORKING NOW !!!!

[@nukalyabbas9887]

How do you know about how the SD card slips into the memory card shell?

[@MrMario2011]

The microSD Card wanted to go into hiding.

[@sumarouno]

Great news for my old ps2

[@dezm101]

SD cart compatibility seems like a big issue. Tried 2 different cards both 256 gb and it just freezes when you load OPL. Going to try one more I guess

[@tnaplastic2182]

Try the newest official OPL Beta!

[@Azteca_X]

Id love to see a speed test benchmark comparing the memory card port vs SATA

[@stephenxs8354]

vs network port load via smb

[@EleventhHourReviews]

any info/updates on saving? both slots are occupied by the FMCB and the MX4SIO. I've been told not to allow the system to save on the FMCB card. Could use some help on this.

[@ScooterCat64]

I watched a KZbin video that said you can swap out one of the cards with a regular memory card once the game has been loaded up and running on the PS2

[@brah001]

The problem saving configuration broke one of my MC, after I found out that it fails when you activate support for mx4sio, if you let this setting OFF there is no problem I made my own mx4sio adapter and it was pretty bad that games didn't read my main memory card, is a shame that they sell that adapterts and nobody tells that you can not save, I hope that will be fixed soon

[@MrMario2011]

Not saving wouldn't be a fault of the adapter, software is still being ironed out.

[@itsjsin5541]

How's support for this currently if you don't mind me asking? I bought mine a bit ago and have kinda sat on it until compatibility got better. I have a fat PS2 with an internal HDD but looking to purchase a slim model at a later date.

[@darionovello6886]

I've been wanting to get one of these for a month now it's sold out and I have my email set up for notifications when stocks back in.... I played Haunting Ground on a PS2 slim off USB stick it ran pretty good but yeah the cutscenes were a little choppy....

[@MrMario2011]

I believe he told me he usually restocks on Friday? However yes, these seem to be selling fast.

[@markusTegelane]

So, the slow save time on games has everything to do with bad programming?

[@ThomasJames-ix8wn]

Hi MrMario have a question using the memory card method are you still able to use the ps2 optical drive to back games up onto the memory card like you would using the hard drive with the phat ps2

[@MrMario2011]

I haven't tried that myself. I've personally never used the PS2 itself to rip games.

[@XxmetalHeadxX88]

Is it possible to use the SD card exclusively to save games? I have plenty of PS2 memory cards. I don't feel comfortable with using those 3rd party memory cards. It would be nice to use it for that.

[@tnaplastic2182]

Only if the game is on them and only as VMCs.

[@mullandglow]

Can I ask what brand and gb size of sd you were using to load your games? I got the bundle from Helder, I'm able to get into OPL, but none of my games show up on the list and the ones I'm testing are well below 4GB.

[@Zooptopus27]

Same here. I'm waiting on one of the sd cards they had listed on their website, but none of the sd cards I've used in my home have worked. Pretty concerning...

[@mullandglow]

@@Zooptopus27 So I ordered the TEAMGROUP GO Card 256GB Micro SDXC UHS-I U3 V30 from amazon and I can confirm it works.

[@BladeCrossEXE]

I can't get it to read the SD card. Thank you for showing me the right ELF file, the other tutorial with download didn't have the one I needed. Using a 79xxxx model. But, OPL boots, yet the games never come up. The red light on the adapter IS blinking, but I can't get it to read. And there's nothing in my USB ports. Help please?

[@tnaplastic2182]

Try the newest official OPL Beta!

[@Jaxxonian123]

@@tnaplastic2182 You keep saying this on every response, but I downloaded zip and it doesn't have the file for people with 75000+, where do we get that file?

[@kanuh]

I load my games from mini router connected to ethernet port with an external 2.0 HDD but once the MX4SIO gets completely polished will be the future of ps2 loading games.

[@elbarry7016]

I have a doubt, pal. When the HDD goes idle, it still working? I've read that when goes that way, the router thinks that "it's off" and you need to unplug and plug again to keep playing. That happens to you?

[@scrappy2082]

i actually have one question about MC2SIO how does it handle dual discs like Xenosaga? & Shadow Hearts Covenant?

[@natsudragonil83]

You can still use FMCB on 9000x models if they are earlier models not patched by Sony.

[@tnaplastic2182]

Yeah, BOOT-ROM 2.20.

[@lnwlf-be7cq]

Hello @MrMario2011 , I have the slim PS2 with matrix chip installed, can I just grab that and configure everything and just put the iso games and play? Or do I need the other method too? Thanks !

[@MrMario2011]

You just need a way to boot into OPL

[@retrotony4119]

Would love to get one, however they are continuously out of stock on his web page.

[@cameron6262]

I cant get past loading config when trying to load a game

[@sirmiluch6856]

This is a first good alternative to USB for slim models. But HDD loading on FAT version is still way faster.

[@MobCat_]

Wonder if we could load OPL with freeDVDboot. Well a freeDVDboot disk that is OPL rather then the normal elf launcher.. I mean I know the hole point of this is so we are not loading games off disks / your disk drive is broken but still... just other entry point options.

[@MrMario2011]

That would be possible, sure! Since you could author a disc with your target homebrew and make sure you inject the FDVDB payload into it.

[@TheMisionar]

I must correct you Mr.Mario, you can save games with this! 🙂 You must use specific OPL version (v.1.1.0-Beta-1629-e20f2ee-bdm3). I made my one mx4sio card from broken ps1 mmc and it work great. As you said, you have all schematics online to do it yourself, off course you need some soldering knowledge, but is not that hard.

[@MrMario2011]

I believe that's the specific build Helder provides, the main branch however did not save.

[@Suksia]

can you please link? and i hope u don't mind telling me how to do it.. i got my hands on a used ps2 recently but have no idea how to play several games better.. blank cds cost more these days, and reviews keep saying usb sucks..

[@Suksia]

I have no soldering knowledge and i really want to play some games that I loved back in my childhood a lot..without getting stuck.

[@Decoy_Shark]

Gutted these came back in stock while I was at work, and sold out before I got home... Edit: They dropped more stock today, and I got one! Super excited to try this badboy out!

[@MrMario2011]

😢

[@FanaticalFootballFan]

So is this compatible with the 99000 series PS2 slims now?! I seen Macho Nacho talk about this and he said it wasn’t compatible with those models. I have a red Japanese PS2 slim that I would love to get this for instead of swapping out a older motherboard and drive from a older PS2 slim.

[@MrMario2011]

It is working on my 90001 console.

[@jayx3m]

what about vmc. will it work on the latest ver of OPL using mx4sio?

[@Forsaken1990]

Great video and great content as always from Mr Mario. 💯👍👍 I have a ps2 slim with FMCB, unfortunately the PS2 does not support my modern new Sony 4k TV. Can I just use my modded FAT first gen PS3 to play PS2 games on it? Is it safe? Thanks

[@mangdaiskie6879]

I have a PS2 slim, you said that the usb is laggy and FMV issues. Is that the same thing if I used a Hard drive?

[@MrMario2011]

Nope.

[@rileyswift4149]

Hello there MrMario could you do a video on what's possible for the pad emulation in OPL what kind of pads can be used,can keyboard be used or arcade sticks are they something I can consider next time I'm buying hardware for my ps2?

[@tnaplastic2182]

Currently only DS3 and DS4, except for some forks where they implemented additional things like guitars.

[@dw9932]

I found my brother's old ps2 39001 fat still runs beautifully and I got the network adapter and modded it and then I found my old ps2 70001 slim now I'm conflicted about it because with my brother's old PlayStation 2 me and him taught my niece how to play video games and then I get with my first ps2 that my grandma that just recently passed away about 10 months ago and she bought it when I was in 4th grade my Mom's husband stole both systems a long time ago and I found them I'm conflicted about which one to take

[@dudeohyeahable]

do you know if there an easy way to get smaller games that would be a cd bin/cue to work with mc2sio? like the thing or ico? im seeing all the iso load up just fine but not smaller bin/cue files. i wonder if im just not putting them in the right file folders. system currently fmcb on ps2 70012 mc2sio using opl set up via mac. thanks so much for your videos and dedication to the community

[@MrMario2011]

They have to be ISO files, I covered it all in my OPL USB video.

[@tnaplastic2182]

@@MrMario2011 Not anymore! They can now be ZSOs (compressed ISOs)!