McMillan 1900s Tobacco Cutter Restoration

Hello and welcome folks.
Today I'm restoring this 1900s McMillan Tobacco Cutter.
I found this item in the back of an Antique store.
This was a quick and fun project to do. I ran out of time to produce a lengthy one as I recently purchased a new toy, a Sculpfun S9
I am in no way any expert on laser cutting but it came in handy to cut out the small piece of timber needed for this project.
I apologise for the audio quality in this video as there has been road construction in my area and my microphone picked up on all the vibration and out side noise.
If you would like to help support my channel you can always select the Give thanks button under the video and make a small donation.
Any donation would be greatly appreciated as I am still only a small channel.
This will help to cover some of the costs of supplies and finding new fun project to restore.
If your reading this please watch some of my other projects and leave a comment.
Receiving comments is one of the best things about restoration work, it makes it all worth while.
#Restoration #Antique #tobacco

[@Austeration]

Thanks very much for watching 👍 If you haven't already please consider subscribing and check out some of my other projects.

[@danipopescu2205]

In the end you ruined everything. What do you mean you don't have tobacco? Do you live in the middle of the jungle?

[@Austeration]

@@danipopescu2205 thanks for watching Dani. Not sure about your countrys rules but here your not allowed to have any raw tobacco.

[@larrykelly2838]

Great restoration

[@Austeration]

Thanks for your ongoing support Larry 👍

[@oneshotme]

Great restoration and an excellent job restoring it as well!!! Enjoyed your video and I gave it a Thumbs Up

[@Austeration]

Thanks oneshot always good to here from you. Thanks for your support. Trying to get projects out a bit quicker. Did you see my previous one ?

[@Austeration]

Oh yes I remember you did Lol

[@oneshotme]

@@Austeration You're welcome !!! I'll look to see if I did or not

[@oneshotme]

@@Austeration 😂🤣😅😂🤣😅 Is that good or bad???

[@Austeration]

@@oneshotme lol it's good 😁 I remember most comments I just had a momentary laps of memory

[@dadsworkshop]

Amazing restoration as always , the attention to detail and the surpassing what most others would do is phenomenal .

[@Austeration]

Thanks very much for your support Handy dad 👍

[@LittleRestorers]

Another masterpiece. What's that new laser thingy that u got there? It looks very fancy. The clever using the oxide with the filler to make it conductive. Sure the wife will enjoy the new carrot slicer 😁.👏👏👏

[@Austeration]

Not a scratch on your latest masterpiece my friend. Carrot slicer, tobacco cutter, tomato cutter you name it this little baby can do it all.

[@LTMS]

What a beautiful item, I really like the design. I always really appreciate that you keep all the original pieces, even if for a moment I was afraid you'd throw away the base. Great job as always, neat and clean.

[@Austeration]

Thanks very much my friend. I did think about it for a few seconds but gave that idea up straight away. Just a quick video this time.

[@georgebradford8931]

Lol carrot slicer....that came out awesome man excellent video as always thanks for sharing

[@Austeration]

Well I don't have tobacco so I had to cut something 😂 thanks for watching

[@Restomaniac]

It's such a sweet tool. And as always a great restoration dear Trev 👌👌👌

[@Austeration]

Thanks buddy 👍

[@DrHutOfHandcraft]

I love carrots 🥕😄 Great outcome my friend 🙏🏼

[@Austeration]

Thanks for watching buddy 👍 worked really well for the carrot lol 🤣🤣🤣

[@LonghornWorkshop]

I can learn a thing or two from you video editing skill mate, outstanding work. Never seen a machine for cutting tobacco, interesting to see and as always great restore.

[@Austeration]

Cheers Longhorn glad you enjoyed it 👍

[@Der_Kleine_Mann]

That's exactly what you need when you want to smoke some plug tobacco in your pipe, and want to make your life a bit easier with cutting the plug. Well done, very nice device.

[@Austeration]

Thank you for watching and leaving A comment, very much appreciated. Please check out some of my other projects like this one kzbin.info/www/bejne/jWbHiIxnnbZ1bcksi=Ov3ZU9c9FzMWayZj

[@PaulRestorer]

Excellent restoration, nice to see your new find

[@Austeration]

Oh thanks Paul. I Really liked your last project

[@ivanstiles7030]

That tobacco cutter turned out beautiful and it makes a great carrot slicer😂 I'm glad you were able to save the original wood base. Most of the time here in the states the wood is either gone or to far beyond repair that it needs to be replaced. Nice job

[@Austeration]

Lol Thanks it's illegal to grow tobacco here in Australia so I didn't know what else I should try cutting with it. I was lucky with the wood on this one.

[@PerfectRestore]

Great video! I recommend everyone to watch and enjoy the spectacle!!! Good luck, bro!!!

[@Austeration]

Thanks very much for watching and for recommending to others. Much appreciated.

[@GT_Racer347]

Sweet 👍🏻 👍🏻

[@Austeration]

Thanks GT racer

[@iand5057]

Nice work mate 👍

[@Austeration]

Thanks very much Ian and welcome to my channel if this is your first time 👍

[@anatolynord7781]

👍👍👍👍👍

[@Austeration]

Thanks for watching Anatoly 👍

[@richardrestorations]

Excellent restoration, nice to see your new toy, now I know what's missing in my life

[@Austeration]

Thanks Richard. Yes can't wait to see what else I can do with it, amazing thing.

[@a.p.a.woodmetal3412]

Beautiful work 👏👍👍👍 like

[@Austeration]

Thank you so much 👍

[@Dalesworkshop]

Tobacco? My wife would love it for carrots. Great job. I like the powder coating. I'm going to look into that. Thanks for sharing.

[@Austeration]

Thanks very much for watching Dale. I guess it can really be used to cut anything. Powder coating is so much fun you should check it out for sure. Please take a look at some of my other projects. kzbin.info/www/bejne/oGjSfGqqh9iUpNE

[@doinsngoins]

WOW 👌 This is a cool tool 🔧

[@doinsngoins]

Oh wow , nice repair of the hairline crack

[@Austeration]

​@@doinsngoins thanks Steve, always ppreciate your comments 👍

[@doinsngoins]

Love this , absolutely beautiful, better than new

[@doinsngoins]

Even the Board , sweet

[@doinsngoins]

Keep this in the Kitchen! Well done friend

[@pabloemy]

Excelente trabajo! sigo varios canales de restauración y recién te descubro, ya me estoy poniendo al día con tus videos. Me gusta que cuides bien los detalles y terminaciones. Ojalá sigas creciendo, perfeccionánte y adquiriendo nuevas herramientas para el canal, de corazón. Vas por buen camino. Nuevo subscriptor 💪🏼 Saludos desde Argentina

[@Austeration]

Hola Pabloemy bienvenido a mi canal y muchas gracias por el Sub. Me alegro de que hayas disfrutado el vídeo. Sí, echa un vistazo a algunos de mis otros trabajos cuando tengas tiempo.

[@richarddube3290]

Nice restoration! I subscribe to a lot of restoration channels, and I love it when somebody restores an unusual item. You can only watch so many people restore a vice. I love the fact that you restored the base, so many people would have just replaced it. I definitely subscribed.

[@Austeration]

Thanks Richard very much appreciated and welcome to my channel. I do my best to keep everything as original as possible unless I have to make something. If you liked this one please check out this project. kzbin.info/www/bejne/oGjSfGqqh9iUpNE it's similar to other but completely different. Let me know your thoughts. Cheers 👍

[@bigvicsworkshop]

It came out great 👍 I have never seen one that small, i like it! Good stuff

[@Austeration]

Thanks for watching Big Vic. I had never seen one before this one. You have obviously seen a few different types then.

[@shedmanx3640]

A beautiful piece mate. Great restoration and I appreciate you left the “love marks”. 🤣

[@Austeration]

Thanks for watching Shed Man, first one to comment on the love marks 🤣 congratulations 👍

[@dannyhenson3141]

I absolutely love pieces like this. You did an excellent 👌 restoration

[@Austeration]

Welcome to my channel Danny and thanks for watching. Glad you enjoyed it. Please check out my latest video and see if you like that also. kzbin.info/www/bejne/g33HcmRnbM6LhJI

[@PINKWOMAN88]

the results are amazing, very nice and neat 👍👍

[@Austeration]

Thanks very much 👍 please check out some of my other projects when you have time. kzbin.info/www/bejne/oGjSfGqqh9iUpNE

[@boriscar]

Great job 👏 my friend

[@Austeration]

Cheers Boris 👍

[@JamesWelbes]

Legend has it he's still sanding that one piece to this day

[@Austeration]

Brilliant James, your the first one to comment about it. Thanks very much for watching. Please check out some of my other projects when you have time kzbin.info/www/bejne/oGjSfGqqh9iUpNE

[@galinapatey9371]

Класс 👍👍👍

[@Austeration]

Thank you Galina 👍

[@MasterT-n2c]

Very cool.😊😊😊

[@Austeration]

Thanks very much 👍

[@waltkowalski2347]

great job. greetings from Brazil. one day I would like to send a Brazilian item for your restoration

[@Austeration]

Thank you Walt, always good to hear from you. What sort of item do you have in mind? Sounds interesting 😁

[@waltkowalski2347]

@@Austeration I have numerous items. I'm a collector. but especially a lighter from the Brazilian expeditionary force. troop that fought in World War II.

[@Austeration]

@@waltkowalski2347 are you on any other social media platforms Walt that I can contact you on ?

[@briansdiecastthailandstoth6747]

Wow that s Fantastic .....

[@Austeration]

Thanks Brian 👍

[@MohamedIbrahim-ze5wy]

عاشت ايدك

[@Austeration]

شكرا جزيلا

[@modellbahnagenda]

👍👍👍

[@Austeration]

👍👍👍👍

[@fieqakim]

Nice😊

[@Austeration]

Thanks 👍

[@Univerzock]

Schönes Video.Tolle Arbeit.

[@Austeration]

Vielen Dank. Bitte sehen Sie sich einige meiner anderen Projekte an. kzbin.info/www/bejne/oGjSfGqqh9iUpNE