Lunch & Learn: Introduction to PowerFlex Variable Frequency Drives

[@alexandremaia200]

Boa noite Tenho um powerFlex 753 e gostaria de saber quais parâmetros preciso configurar para definir o Di1 como sentido de giro horário e o Di2 sentido de giro anti-horário. Configurei o Di1 no parâmetro 163 entrada digital 1 e está funcionando normalmente, já o Di2 no parâmetro 162 vai para 1 mas não gira como se faltasse referência de velocidade, ambas as entradas digitais serão acionadas por botoeira.

[@mcnaughtonmckay]

Hello Alexandre, Consulte a página 73 no seguinte documento: literature.rockwellautomation.com/idc/groups/literature/documents/pm/750-pm001_-en-p.pdf . Consulte os parâmetros 164 e 165. Para obter mais suporte, entre em contato com o distribuidor local da Rockwell Automation: locator.rockwellautomation.com/ Please view page 73 on the following document: literature.rockwellautomation.com/idc/groups/literature/documents/pm/750-pm001_-en-p.pdf . Look at parameters 164 and 165. For further support please contact your local Rockwell Automation distributor: locator.rockwellautomation.com/

[@richcollins513]

Pointers for the next video. Point out MCB Jumpers such as Enable and Safety Jumper. Explain how to HIM COPYCAT. Show entering Motor NP Data. Show how to change P201 permissions to show more parameters such as P008 EMWH and P010 ERTH. Show how to connect to CCW with a 753 using a 20-COMM-E since the 753 does not have ethernet like 755. Open up a drive! Show the drives components that need maintenance such as the Stir fan(s) and Run fan(s) and IGBT Thermal Paste replacement. Point out that the Bus on these drives can reach lethal voltages and needs time (5 minutes) to bleed off when a drive is powered down. Tell the people that a backup drive pulled from spare storage might need the capacitors reformed before being installed as a replacement if it has sat for an extended period of time to avoid drive destruction. Thanks for this video it was nice to see an AB video coming from somewhere other than India, I can make out what your saying.

[@azeemahammed8646]

could do you please mention a software simulator for powerflex vfd? i mean a virtual vfd !

[@mcnaughtonmckay]

Hello, There is no Rockwell Automation software that can emulate PowerFlex drives. Please contact your local Rockwell Automation distributor with any questions. locator.rockwellautomation.com/

[@dennisjiu1771]

Best explanations for Rockwell drives. Thank you very much.

[@mcnaughtonmckay]

Hi Dennis, thank you for watching. We're glad to hear this video was useful for you! Hope to see you on one of our livestreams, every Wednesday at noon Eastern Standard Time.

[@azeemahammed8646]

Thank you

[@richcollins513]

PFLEX-SG002M-EN-P