Playlist of other water projects: • Plant Watering System To show your support Like the video, Subscribe to the channel, and comment something for the algorithm! My Discord: bit.ly/MikaelAbehseraDiscord
Пікірлер: 29
@AGI-BingoАй бұрын
Subscribed! ❤ Im wonding what the curve looks like for each system with variable valve, that is not only on off but has a range of pressures and flow rates. And especially how to take dynamic pressure and adjust the calibration valur accordingly... Let me know if you have some insights 🙏 Thanks a lot and all the best!👍
@M_SHEHUАй бұрын
Hello i really enjoy your videos. Can i use this for meaauring flow of oil in a refinery ? Or do you have better options that can work with am arduino
@samuelg.5685Ай бұрын
I want something like that. We are into manufacturing but we need something to help us set the amount of water needed and it gives us exactly that e.g. if we set 1000ltrs, it releases that exactly and stops. Can we have that?
@BarMagnet5 ай бұрын
Would it not be better to include a counter like 74hc4020 to save on interrupts? Use an interrupt at a suitable count value. These hall effect devices are essentially liters per pulse, so the count yields cubic meters easily. Appropriate timers can be used to find flow rates.
@MikaelAbehsera5 ай бұрын
Yeah there’s definitely better ways to go about it, I would completely change the setup next time around
@waughjake2 ай бұрын
When winding your thread seal tape, you should wind it in the direction the fitting is going on, aka clockwise around it. This will pull the end tight when you screw the fitting on, rather than push the end of the tape out.
@MikaelAbehsera2 ай бұрын
Good to know, thanks Jake!
@gwm2494 күн бұрын
Don't those fitting have seals in anyhow? Not sure but they look like they would
@fireomen874 ай бұрын
would the flow measurements still be accurate if the flow rate were to change? I am planning on building something using these for a filtering system, however, the filtering system gets slower as the filter pads become more clogged up. But if it's been calibrated then it should still have an accurate reading right? It would just show a slower output? Thanks for the video! I appreciate you keeping in your own errors, we're all human and it's good to learn from others mistakes :) Keep up the good work!
@MikaelAbehsera3 ай бұрын
ideally this would give you flow rates as a reading, so yeah it should be accurate exactly as you said
@WhereLeo2 ай бұрын
thank you for your videeo, does flow sensor can control the pressure of water flowing? IM looking for a valve that can control the pressure electronically.
@MikaelAbehsera2 ай бұрын
Glad it helped! thanks for the feedback kzbin.info/www/bejne/aYSUZWppeZepZ9E as for water control I would recommend this solenoid that can close and open a water source electronically, and maybe pair that with a pressure sensor if thats what your trying to read
@bassamsibai751814 күн бұрын
Thank you. Could you please share the code?
@roiad8765 ай бұрын
instead of replacing my water meter I want to add this to a nearby faucet to track when there's water coming from the city supply, can this be used for that? I'm worried it might track air pressure instead when there's no water flow.
@MikaelAbehsera5 ай бұрын
Do you think the air pressure is strong enough to turn it? Maybe you can install it somewhere else we’re going can guarantee water flow. If you can get around that then yea this would work but if it’s a city supply line it might be too powerful or fast of flow for this sensor, that would be my main thing to check
@jdw83203 ай бұрын
Is there a way to read alot of flowmeters? I want to monitor fertilizer flow on my planter it would take 54 sensors
@MikaelAbehsera2 ай бұрын
yes, but at that point I would say try and find a better way to mesure, like at the source maybe
@mohamedimadh988627 күн бұрын
I really appreciate the video but did you compared milliliters vs grams at the end? 18:26
@Nuros1621 күн бұрын
yes, because 1milliliter is 1gram
@duribv24 күн бұрын
Hi, where is the code? Do you have git?
@justintawil89862 күн бұрын
Can you share the updated code
@timothymorolapeapereakanji25915 ай бұрын
Pls can the water flow sensor be used to detect water leakage
@MikaelAbehsera4 ай бұрын
If flow drops you can assume there’s a leak but it’s tricky and not super accurate, there’s probably different ways to detect that
@ashutoshghosh378629 күн бұрын
can we control the rate of water flow using this sensor ?
@MikaelAbehsera11 күн бұрын
no just read it
@tychojacobs58913 ай бұрын
would this code work on a esp32?
@MikaelAbehsera3 ай бұрын
it should, just make sure you select the right board in the editor before you upload and check where your proper pins are