Mechanical Engineering Design, Shigley, Fatigue, Chapter 6

[@Mr.Me_Osama]

thanks bro, I don’t know what I would’ve done if you weren’t there. allah bless you. Keep going.

[@deepakbriglall5845]

These videos are so helpful for people like me who struggle to read from textbooks. Thank you so much

[@mecha_engineer]

I've got an exam on this tomorrow.....this was so helpful...thx

[@abhijeetghoshal3644]

One of the best fatigue failure lectures on youtube! Subscribed!

[@abedallahalfalugy339]

Im watching you from jordan, I love your explaining so much

[@beoptimistic5853]

kzbin.info/www/bejne/rHenfpR-hpmejZo 💐.

[@gbornlegend22]

I am not sure if you still active or not. Just wanna thank you for this summary. I can understand the chapter much mor better. God Bless You!

[@HuSsAiNNiAsSuH1]

From UTM Malaysia students you are spectacular ^_^

[@mijkwgeblwxz6853]

i have an exam in 2 days and you just saved my life. Thank you so much

[@CantoMando]

Excellent Video! Exactly what I needed!

[@CantoMando]

I love how you go through and follow the textbook specifically! :)

[@easypeasyengineering5360]

Thank you! :)

[@christophermeyers1]

I am overflowing with gratitude.

[@jasondaniel3594]

This is amazing. Please, do every chapter!

[@cwengrishm2060]

please !!!

[@ephraimkgaile4040]

greaaaaaaaaaaaaaaaaaaaaaaat stuff.....chapter 5 please please please This is sooooooooooooooo helpful

[@harlinwood6292]

Thanks for taking the time to make this so palette-able!! we all really appreciate it!!

[@zackroberts6426]

You did an amazing job! I have the 10th edition so this was very helpful.

[@AnkitThakur-bg9vm]

Sir plz upload ur lecture on each nd every chapter of shigley book....ur video is so helpful 2 me....nd i m so thankful to u for ur video....

[@ImranAli-us9ml]

Great lecture I got whole concept in one hour,great way of teaching also

[@beoptimistic5853]

kzbin.info/www/bejne/rHenfpR-hpmejZo 💐.

[@muhammaddanishnaeem5134]

Good Explanation of the Topics. Highly Recommended.

[@beoptimistic5853]

kzbin.info/www/bejne/rHenfpR-hpmejZo 💐.

[@Lichugunti]

Amazing explenations. Please do chapter 8 as well . This channel might save our lives !

[@easypeasyengineering5360]

thank you! I'm not sure chapter 8 vids will be uploaded here anytime soon but they will be for sure, someday!

[@muhdzulhylmi2615]

@@easypeasyengineering5360 still waiting T_T

[@talha9276]

@@easypeasyengineering5360 still waiting

[@SultanAlawad]

Thank you so much, very beneficial, keep going!

[@stefaneinarsson7223]

Thank you very much.Your notes are very good for me since I dont know the material well.

[@AtrocitieHD]

GREAT video. Thank you for the help!

[@dhteamb]

!Great Summary! Waiting for the next videos

[@easypeasyengineering5360]

Thank you!

[@yakubuabdullahi3834]

Good day sir, your videos on shigley machine design are all marvelous. Thanks for your efforts, I would be greatful if you help me with this question 1. How do one tell if there is localized yielding or not using the factors of safety 2. How do one tell if there is treat from the fatigue factor of safety (when a bunch mark is not given) 3. Basically my questions is about how to interpret fatigue factor of safety and static failure factor of safety after calculating it. Thank you soo much as you help me out. God bless you.

[@spaceislove4884]

@easy peasy engineering please do some examples related to this topic

[@hadiasghari2266]

Thanks from Germany Thank you Iranian bro

[@grandeurbold3684]

ITS SO COOL.......pls I need the lecture notesthanks!

[@naeemullah7744]

thanks.... very helpful video.... it would be better if you upload the other chapters as well...

[@hamad7285]

Thank you for the very good ,video, it helped me a lot 🌹

[@shukhratkhujamov8124]

Gooood job, brother!!! thanks so much!

[@jacquesnicolay9221]

Thank you sooooooooooo much sir. So very helpful. Thank you.

[@Hamzakhan1o]

god bless you sir

[@siyathandwabovana1244]

Thank You! it's really helpful!

[@abdulhakimal-zekri6148]

Thank u very much u very very much

[@Philamilapeed]

Hey Javad! At 53:37, when you identify the green point on the load line which you use to find the reversed stress, how do you find that point?

[@easypeasyengineering5360]

that point was just an example. in order to plot in any point in the graph, first we need to find sigma_max and sigma_min (and Kf sometimes). Then we can find sigma_m and sigma_m based on the maximum and minimum stresses. The x-value of the point will be sigma_m and the y-value will be sigma_a. at 53:57, i assumed for an specific sigma_m and sigma_a are evaluated. Then I just showed that point on the graph. In order to have better visualization, I used that green point instead of point A.

[@sauravkumargupta2379]

You are awesome tutor can you please tell me which problem from singley book are the best one to get concept. I would solve 10 to 12 question per chapter.

[@abdulsaqib4782]

Sir g ....shigley 10. The edition books of built and pulley problem solution

[@sh_nolaPrime]

Thanks

[@GameOver-zn2th]

thank you

[@mdmehidehasantusher1334]

Please can you explain Miner's Rule for fluctuating stresses

[@beoptimistic5853]

kzbin.info/www/bejne/rHenfpR-hpmejZo 💐.

[@sandeepjamkar]

Excellent stuff! Can you direct me to the video in which you have explained the difference between pressure and stress?

[@easypeasyengineering5360]

Thank you. Pressure and stress may look the same if someone wants to judge them only based on their equations i.e force over area (P/A). However, the main difference here is about the TYPE of these two parameters. Pressure is 0-degree tensor and it is (99% of cases) treated as a scalar while stress is a tensor with higher order. In order to have a better understanding about your inquiry I suggest you to study over "vectors and tensors" chapter of your mathematical reference book.

[@hafizalam7620]

how did you stoped making videos

[@14dayztimeap8]

To understand more better, watch less boring lecture channel. Everything is easy.

[@naderal-hajissa2450]

do you have any other videos for the first 5 Chapters? if yes please give me the link to them :) great video ,, Thank You

[@easypeasyengineering5360]

unfortunately lecture notes for chapter 5 was not recorded during the class. sorry.

[@jesussaquin6266]

Is this a hard class??

[@jahidhassan9798]

Excellent.. can u help with Shigley's Machine design 9ED SI unit solution please??

[@marfree411]

Thank you very much, you were slow but neat

[@khizerabbas786]

Thanks sir...

[@beoptimistic5853]

kzbin.info/www/bejne/rHenfpR-hpmejZo 💐.

[@drunkdonutboy]

Fatigue failure was interesting, but this chapter was just tedious

[@zaiddaghash77]

Is there a PDF summary of this subject?

[@PrimoSepo]

Just a guess: Persian boy?

[@taylyn8290]

Can you do chapter 16 and 17

[@taylyn8290]

Or do you have any notes on them

[@beoptimistic5853]

kzbin.info/www/bejne/rHenfpR-hpmejZo 💐.

[@kaanbagdiken]

makeli sevdirdiniz hocam

[@shashwatmadan5227]

goat

[@lilack5007]

I like the persian Accent though

[@brave385]

Please do bearings ch11

[@iusefabdelhafith5336]

please do for chapter 8 too

[@easypeasyengineering5360]

unfortunately lecture notes for chapter 8 was not recorded during the class. sorry.

[@amaz1996able]

Please upload video for ch.8 and 9

[@pochinki4352]

Can I contact you needy with homework in exchange for money

[@Hamzakhan1o]

ch5 too sir

[@eyobabich5423]

is good jop

[@aalamcheem850]

Can I have your email. Just a few questions I have I need clarifications with?

[@easypeasyengineering5360]

sure. that is [e-mail]

[@paotor69]

I want this in Spanish :'(

[@gabrielcedenocarpio7218]

XD justo estaba buscando material para estudiar

[@miqdadhaji8902]

2

[@EducativeVideosBD]

Thanks