Mega 40” Wheel of Fortune - Home-Made Wheel - Update #6

[@isaiahjohnson3200]

Can't wait for episode 2 from you!

[@ericbee519]

OMG the sound!!! so legit!!!! do you have a video how to do this? it's the best time since we are on quarantine in the Philippines

[@pschiptunes64]

Yellow landed in the $1,000,000 wedge!

[@marksteele6172]

Wow

[@carolhartman4715]

Amazing! The flippers even wiggle back and forth like the real ones on T.V.!!! Excellent attention to detail!

[@PARANOiAMAX]

Thank you very much! That was a huge factor in the design. They have to wiggle!!!

[@mattdibenedettofan7719]

@@PARANOiAMAX how much did it cost to make that

[@pschiptunes64]

The wheel sounds too much like the one on the show.

[@joshyboy1983]

A: This looks Friggin' amazing! B: I think the way you have the wedges attached is the same way the show has it.

[@PARANOiAMAX]

Thank you so much!! The show uses something similar.. their removable wedges have little squares on the back that allow them to stick, but they don't have connectors on the regular wedges on the wheel--so, it's likely some sort of glue dot that provides temporary stickiness.

[@Animator2024-k1m]

@@PARANOiAMAX How did you make the whole entire wheel itself? And how did you make all the gift tags like the Wild Card and half car and the wedges, like the Surprise Wedge, the Mystery Wedge. Because I want to try and make one like that

[@alexthephotographer9314]

0:08, “Wow!” “You got quite the opportunity here!”

[@ryang3331]

Wow, you landed on the million dollar wedge on the first spin!

[@imbatrossthescrub2096]

This helped me on a personal project, thanks!

[@HarlemHyena]

1:03 Easy come, easy go...

[@ElizabethMary-d2y]

1th round 0:00 second round 0:19 thrid 0:32 final spin 0:39

[@Rlotpir1972]

You should add lower and higher dollar amounts too. Some other spaces like "Free Spin" and "Free Vowel".

[@nathanz98]

My dad and I are going to build a wheel too. But our wheel will be either exactly or smaller then 30 inches.

[@WyattsGamesofFun]

This is one cool wheel. Good job.

[@PARANOiAMAX]

Thanks so much!

[@marksteele6172]

​PARANOiAMAX make an episode 4 of wheel

[@johncraw8572]

Awesomeness video how did you put the rivets in the wheel?❤️❤️❤️❤️❤️

[@harryjpotter7]

This THE best home-made wheel. It sounds EXACTLY like the TV show. How did you do it?

[@PARANOiAMAX]

Thank you so much--lots and lots of R&D to get to this!

[@harryjpotter7]

I could imagine. I'm sure it had to do with EVERYTHING, especially with the spokes and the flippers. o_o

[@johncraw8572]

Awesomeness how long is the lone rivets you use for the wheel?

[@CalebAnimations3000]

Why are there the *wedges?*

[@DanielFrankDK]

Awesome flippers. Would it be possible to get a hold of the design for them?

[@Farhadg2iscool]

Amazing

[@gordonbeattie4864]

INSANE!!! That is AMAZING!!!

[@fanheroteam6504]

Is that an half car tag is glued with $500 sandwiched?

[@PrinceDisneyFanTV]

How do you look for that disney vacation wedge?

[@alexthephotographer9314]

Dudeeeeeeeee. I don’t know how you made this but, holy cow. That looks very similar to the one on the actual show. That probably took days to do

[@AlexisdataworkingYT]

So satisfying 😌

[@adamdragster]

Where can I get one of these?

[@Tatetippin2321]

You are very talented, what is it make out of and where did you buy the pointers? Just subbed btw!

[@Brony-kk8en]

Wish I had one of these.

[@johncraw8572]

Awesome video did you use a turntable to make the wheel spinning?

[@matt_gachaandgaming]

What happens when you land in the middle of the car 1/2 slim wedge and you call a letter that is in the puzzle??

[@Undercoverelevator212-s2n]

Then you get the 1/2 car. If you get both and solve the puzzle, you'll get the car. Happens today on the show, but it's always just the plates.

[@PARANOiAMAX]

If you do that, you pick up a half car tag! The way I play, the slim 1/2 car wedge is only in rounds 1 and 2; rounds 3, 4, and 5 have the regular 1/2 car tags.

[@matt_gachaandgaming]

The half car was removed on the show

[@tabathapusen2079]

Chrysler and apple gift tag for the next update can you do the top of the flippers black

[@brunopiadista3338]

Make the bonus wheel!

[@xuanminhang2390]

Actualy,what's the VALUT wedge is?

[@AeroZeppelin33]

Nice wheel :)

[@PARANOiAMAX]

Thanks 😁

[@johncraw8572]

How did you make the top dollar wedges please tell us

[@Tekken90Fan]

would you ever include the classic Free Spin wedge to the wheel?

[@PARANOiAMAX]

chris mathis I do need to make one! I have the perfect color sparkly card stock to do it

[@barkerfan9148]

Perfection almost to a T. All you need is bigger arrows a banister behind the arrows, and a bigger platform below possibly with lights and you’re in there. But love the wheel all n all. Btw do you have a puzzle board?

[@PARANOiAMAX]

The arrows are smaller on purpose-I have a larger design but they don’t “flip” correctly on a smaller wheel. There are lights under the wheel that cycle when the wheel is spinning but you can’t really see them unless you are looking from the side and not top-down. I have a custom digital puzzle board I use with the wheel.

[@barkerfan9148]

PARANOiA2MB ok cool do you have a pic of your digital board?

[@vanessapereiradasilva2697]

BarkerFan 91 qp

[@hiltonlive32grnrngr]

I want to find out how to make the wheel on my own and don't really care for a tutorial video but I at the very least want to know how or where you get the metal wheel with the pins!

[@PARANOiAMAX]

Anna Loveberry Babycakes you’ll need to get a long piece of square metal tubing and run it through a tube roller, measuring the radius every so often until you are at the desired size. Weld it together, drill 72 equidistant peg holes, put in shaved off/rounded hex bolts and there you go!

[@hiltonlive32grnrngr]

@@PARANOiAMAX Thanks so much

[@wadehallen]

Do you have a video on how you made this?

[@stillabreadofcheees]

what a beautiful wheel, i wish i had a wheel like this

[@cleitonlopes8656]

BBB

[@kristinabila2294]

I wish i had that wheel

[@Pikachureacts150]

Can you tell me how you made the wedges and the wheel

[@AliceJellyfish]

How did you make this

[@adamvenis3714]

Where did you get the flipper mechanisms ?

[@Jenox1972]

How did you got these wedges and tokens?!

[@johncraw8572]

How did you do all the wedges on the wheel?

[@ompetalheadshow]

From a poster board

[@mitchelbayless7091]

Do a video on how you made this wheel

[@wns808]

Nice! What’s the hardest/fastest you’ve spun that wheel so far? Also, any plans to replace the Free Play with a yellow $850 wedge like in Season 39?

[@PARANOiAMAX]

I really shouldn't be saying this but.. if I spin the wheel hard enough, it speeds up time. I'm not kidding. Don't tell anyone

[@FLonYT326]

What did you use to detach the wedges

[@PARANOiAMAX]

Slim clear dual-lock reclosable fasteners--they look like "hard" velcro, basically.

[@ILikeWaterTowers]

1:05 0:10

[@buslover8235]

thinking of making a scale 1 wheel

[@PARANOiAMAX]

That's awesome!! For me, someday in the future I will do the same. I need a bigger house first. :)

[@buslover8235]

@@PARANOiAMAX but i have run out of tape and my wedges are never perfect so i would like some printed. the layout i am trying to make is season 26.

[@buslover8235]

@@PARANOiAMAX did a wedge test and they all fit!

[@TED9K]

I have a Round 5 idea: Its just like Round 4 but with no wedges.

[@PARANOiAMAX]

TheEpicDoge9000/Rysen7410 it isn’t listed in the description, but you’re exactly right. For round 5 (speed-up), all extra wedges are removed. The bonus round then follows as round 6.

[@genilsondealmeidasantos605]

Você poderia mostrar o processo de construção dessas roletas

[@andrewjung1699]

Please do a video on how you made it!!! I want to make one :)

[@tomislavjerkov7931]

that's the bonus wheel

[@michellew4170]

Can you do more of this please and thank you

[@Undercoverelevator212-s2n]

Make the mystery wedges more accurate, and a regular Lose A Turn wedge, where it's not a Vault.

[@wheel326]

It's called customization. Not everyone is going to stick with the original.

[@paullarue2010]

Blue $600?

[@PARANOiAMAX]

Yep! Lots of $600 and $650 amounts on the wheel currently.

[@marksteele6172]

Blue $600?

[@johncraw8572]

Awesomeness wheel could you help me build one for me please?

[@jaybanks2600]

I WANT THAT WHEEL! WHAT IS YOUR PRICE TO MAKE ME ONE

[@PARANOiAMAX]

Unfortunately it's not for order or sale. Just a fun personal project! :)

[@upgradedtitancameraman1254]

1:20

[@kacpertrendowicz4408]

Tell me how make wheel of fortune

[@OfficialSharpayEvans-e3l]

Request: Super Mario 3D World

[@adamgoodwin3982]

You should different layout

[@interstateruler]

Can I get an R?

[@faywallace9147]

have you ever noticed how pat sajack always touches the arm rest with his hand to slow the wheel down in the bonus round?i think this is cheating and why hasnt anyone ever said anything about this,am i the only one who has noticed this?please give me your thoughts.

[@PARANOiAMAX]

Fay Wallace this basically boils down to a conspiracy theory. He has no way of slowing down the bonus wheel.

[@joshyboy1983]

@@PARANOiAMAX There is a possibility that they installed some sort of brake on it & only use that when the Million is in play. Just my thought.

[@PARANOiAMAX]

@@joshyboy1983 Game shows are legally bound to be fair, and watched over like hawks while games are being taped.. so it's very unlikely.

[@Yourenodaisyatall]

qqqq

[@ILikeWaterTowers]

1:20