Megane Led Light Fade Off with Turn Indicator - DDT4ALL Tutorial

[@doorht8721]

Michele, and for the rear drl? Can too?

[@karledenvann6354]

Do you recomend to do 1 change at the time even at same cluster? Or can i do for example corner and drl of with blink at the same time? Best regards!

[@Andrezinhok13]

Do you know if, in the megane mk3, I can make us style?

[@jean-claudemillet4470]

bonsoir a tous magnifique vidéo comme d'habitude...ma question possible de faire défilé les feux

Michele, do you know why its different if we change parameters in developer mode vs. ddt4all? I change welcome message but with no effect. Thank you.

[@STGR1969]

Great tutorial again, thank you 🙏🏼👍🏼

[@8011981]

Is it possible to turn off the lower part only of the DRL, the part that is on the bumper? Not only with turn indicator but to stay off all time?

[@nunocunha6843]

Boas sabes se dá para a luz do mínimo ficar sempre acessa mesmo quando se liga os médios como a nova megane

[@nunocunha6843]

Sabes se dá para activar a luz do mínimo quando ligo os médios ou seja ela não reduzir cada vez que logo os medios

[@mouradnaji6665]

Hi, is it possible to activate needle sweep on megane 4 explore?

[@gaiagryta]

Hello. Thank you for the video. I did that too and got the same result, but after a while the LED headlights started flashing on their own. Did I make a mistake? There is no problem when the dipped beam headlights are on, but when the parking lights are on, the daytime LEDs start flashing, as if there is a malfunction.

[@ersukhwinder98]

Hi My car’s (megane IV) DRL in faulty and i want to replace it. Do you know how to replace?

[@vlad132ful]

On Dacia Logan 2020 does it work? It's formidable! 👍

[@richardmessenger7896]

Hi there where can I get this amazing program 😀Rich

[@andreicristian8874]

hello, I have the latest database, after I connect, my model, megane III 2015 (x95 PH2), does not appear in the list of vehicles, although I can find it in the folder in the database... could you help me?

[@jimmywan2184]

Hi Michele, my Megane Estate (1.6 Diesel) DRL are not working very well. Can you suggest a possible reason and fix? I was told by my local garage that it could be the LED ballast needs changing? Or would it be the LED itself? Passenger side is very dim, driver side is dim, but not as bad as passenger side. Thanks in advance!

[@Alex-xv5ws]

hi friend tell me. How to make the running turned off when you turn on the neighbor?

[@TheCrein6262]

Can you convert car which have the "simpler" LEDs to the headlights like in this video or to Pure Vision LED?

[@robertodefilippo5567]

Great Michele, very well done. I did it easily! Thanks.

[@MicheleP]

good! stay tuned for many more tutorials!

[@dieterdoom9635]

Hey Michele! I watched all youre videos, now my Megane is even more better, thank you! Will you make a video about how to change the welcome/goodbye sequence? I would love a slow burst of the front and rear leds with the welcome/goodbye scene. I already searched on forums and Facebook but its different to understand with al the parameters. Can you make a video about this? Looking forward for this! thanks

[@MicheleP]

hi dieter! i'm doing that video today! i will render it in the weekend and then on monday it will be online! :)

[@dieterdoom9635]

Thats amazing, thank you! Looking forward too it on monday!

[@dieterdoom9635]

@@MicheleP where is the video? :D

[@daniel1elkarif]

Hi your video is awesome. Tnx It is possible to set the mirrors to open only On startup Of the vehicle

[@muttazsaied4396]

Hi, What is the order that responsible for activation or disactivation the rear LED?

[@cosmina8173]

Ciao Michele! Which means the "BLA function activated" in ABS?

[@ilyahalif]

HI , I have the Megane IV Sedan . Do you if Its possible to activate the welcome intro on the cluster also?

[@MicheleP]

nope, in the cluster you cannot activate nothing.. because the RS or the GT have several more ECUS that our "normal" megane doesn't have

[@ilyahalif]

Ok tnx,like your videos.

[@brunolourenco6754]

Hi, i have the GT 1.6 205hp os that possible for me?

[@sinanaliyurdatapan9817]

Well done. Pls make video about fatigue detection and traffic sign reconition also.

[@MicheleP]

fatigue detection needs a separate hardware, so with ddt4all you can't do nothing at all. Traffic sign recognition needs a front camera under the rear view mirror, so again, only with ddt4all you can't do nothing.

[@sinanaliyurdatapan9817]

@@MicheleP Hi bro. Yes understood. I guess my car (Kadjar) has that hardware. I alraedy open fatigue detection on r-link but i can't shown fatigue bar on screentraffic sign recognition as you said need camera under rearview mirror and automatic lights should be i rememeber. I have that options. I think you have some information for helping me. Which options will change? Thanks for answer and wonderfull videos. Buona fortuna fratello.

[@coffeeborg]

Hi Michele, thanks for all your videos, great work! Is it possible to enable this functionality also when the main lights are on? I've noticed that in this case, i.e. left DRL is not turned off when left turn indicator is switched on.

[@MicheleP]

Nope, when main lights are on only the fog lights are manageable

[@teionbrooks4020]

Can you help me to use the app my ucs are loading but when clicking scan nothing happens

[@AOuadi79]

Yes awesome. Youre the man. Works perfect. Thank you very much. Hope to see more of youre awesome tutorials videos. Bravo.

[@MicheleP]

thanks man! they will be for sure! stay tuned!

[@loreludo]

Ciao Michele. Innanzitutto complimenti per i tutorial, sono utilissimi! Volevo chiederti se è possibile ridurre la luminosità della luce diurna invece che spegnerla completamente all'attivazione dell'indicatore di direzione. Grazie

[@MicheleP]

No purtroppo, essendo un codice binario ha 0 oppure 1, non è dimmerabile

[@naceursean2554]

Can I apply it in renault symbol and sandero?

[@domenjankovec8859]

Hello... Please can you help me?I want to rear LED DRL lights activate...

[@tanitab2]

Ciao Michele, grazie per la guida. Per caso hai la guida per l'impulso delle frecce che attualmente con la leva sul volante con un impulso le frecce fanno 3 lampeggi, ed io vorrei portarle a 5. Grazie in anticipo

[@MicheleP]

Eh no purtroppo no, si può fare su Volkswagen, ma su Renault no

[@tanitab2]

@@MicheleP Peccato, sarebbe stato comodo 😉👍🏻

[@stylzjhn]

Hi Michele, are all you megane tutorials also work for the GT version? I have the Megane IV GT Estate/wagon

[@stylzjhn]

Just tried this on the GT version and it didn't work... I do have the LED headlights

[@geotheo6455]

Can i deseable the start srop with this

[@rasbakindan]

Awesome videos, I'm looking forward for more! by any chance any idea on how to enable r-sound feature in bose edition megane?

[@MicheleP]

hi! unfortunately with Bose version IS NOT POSSIBLE to have r-sound :( i have the same version and there's no way to activate it ☹️

[@rasbakindan]

Eh, it's a pitty then.. megane is great but this dci sound is like car screaming please kill me :D:D

[@MicheleP]

Yeah I know. I only have engine sound activated in the multisense option. It’s not bad actually!

[@Andy-Robus]

hi - I am guessing this cannot be done on Clio IV because it has not got that 'Sailing' configuration ?

[@MicheleP]

sailing mode? where do you saw it in this tutorial?

[@Andy-Robus]

@@MicheleP - thats what you selected in DDT4ALL . USM_CMF1_Sailing_B4 .. unless my eyesight is poor and I read it wrong?

[@MicheleP]

oh, sorry! i told you that because "sailing" is a specific flag you have to select in DDT4ALL for a specific function in the automatic EDC Gearbox. Didn't thought you're referring about the Cluster. I've just looked up in the Clio IV, there's a similar ECU to USM_CMF1_SAILING_B4, but there's nothing about turning off DRL when indicator lights are on.

[@Andy-Robus]

@@MicheleP - ah right thank you. What is the similar ECU setting in DDT4 all for the clio to USM_CMF1_SAILING_B4 please anyway ? - thanks

[@Andy-Robus]

​@@MicheleP - thanks , what is the similar ECU to USM_CMF1_SAILING_B4 then please on the Mk IV Clio ?

[@felicflorian9353]

Ciao Michele,grazie per i tuoi video!!ci sono riuscito anch'io su la mia talisman,bel lavoro!!come faccio a scaricare l'ultimo aggiornamento ddt4all?'hai un link?su una clio V, ci si puo fare questo lavoro??grazie tante!

[@MicheleP]

ciao! si, si può fare su praticamente qualsiasi vettura renault (credo però che se la Clio V ha già i fendinebbia a Led questa cosa sia di default attivata). Comunque il link per scaricare il DDT4ALL aggiornato è questo qua cloud.mail.ru/public/LCM2/frc6TSG3Z?fbclid=IwAR00NTzUNs35a2Kc8TiKMUGRjVQG9XBYFcoqeC0IPaBNVBx9I3_jUO7tLKk

[@felicflorian9353]

Michele Predieri grazie per la risposta!!! Lo sai per caso se la talisman legge, con la telecamera sul parabrezza, i segnali stradali?? Grazie

[@MicheleP]

@@felicflorian9353 si, dovrebbe leggerli! se nn li vedi forse devo attivare la funzione su r-link

[@felicflorian9353]

Michele Predieri quella lo fatta! Qualcuno mi diceva che legge solo la velocità, che la mia lo fa, però mi sembra strano...,magari c’è da attivare qualcosa ... saluti

[@MicheleP]

@@felicflorian9353 aaah in quel senso? no, legge solo i limiti di velocità, non tutti i segnali. pensavo che tu con segnali intendessi i limiti. legge solo la velocità purtroppo

[@boxster94240]

hello, it is possible to activate the adaptive speed control, DAB, R sound on a diesel mode?

[@MicheleP]

Hi, no to all, for the adaptive cruise control you must have the front radar, the DAB is not available for the megane, and r-sound does not seem to work (only the A110 sound works)

[@boxster94240]

ok you should make a video for the R sound with the alpine

[@boxster94240]

thank you for answer

[@danzi2877]

Hi! Do you know how to adjust the front led brightness from high to Low when you lock/unlock the door? It will be brightest and slowly fade away and it “burst” .

[@MicheleP]

i'm prepraring a video! the topic is WAY tough to explain, because it will take a bit of explanation but since many of you asked me how to, i'm copywriting it :)

[@danzi2877]

@@MicheleP Thanks, so you do know how to make the LED from brightest to fading and then burst! awaits eagerly.

[@MicheleP]

@@danzi2877 yep! there's a welcome/goodbye sequence to program :)

[@danzi2877]

@@MicheleP Great! shall wait for your video on this :)

[@jbn37]

Hi. Do you know if it's possible, with DDT4ALL, for Megane 4 with electronic parking brake, to retract the rear brake pistons to service position so that you can replace the brake pads? If yes, it would be nice if you can make a video with this. Thanks a lot! Good job!

[@brunolourenco6754]

+Michele Predieri, i was trying your Lights Mod, but it didnt work as expected(or do) because it only works as u say when i put the Lights lever on "0" position. the thing is i never use it on that position, almost the time it is on Auto and sometimes in manual... Question: Is it possible to activate that mod when lights in "Auto"? Thanks

[@doorht8721]

Hello from Portugal, is it possible to control the interior lights separately?

[@MicheleP]

i have to study on this! but i guess it is possible!

[@lencikke]

Vey cool. Does this work with versions, which have the "simpler" LEDs, only under the headlights?

[@MicheleP]

it works with every type of led!

[@killuaN95]

Thank you ... do you have informatiin about how to update from 2.2.15 to 3.3 !! For the android auto/car play

[@abdelittoo1637]

They are updating now to version 7, not 3 anymore.

[@MicheleP]

yes, as Abdelitto O said, now they're installing the 7.0 version, and thenn you can activate AA

[@killuaN95]

So there no way that i can upgrade from 2.2.15 without passing by renault dealer (i ask because in my contry they have no clue about AA )

[@silviobocas]

Ciao Michele, ho visto i tuoi video e mi sono piaciuti molto! Sapresti dirmi come si fa a manovrare le serrande dell'aria condizionata con ddt4all? Sulla mia scenic 4 se seleziono l'aria sia sul parabrezza sia in centro, l'aria esce solo dalle bocchette in alto. Penso sia un problema di come sono posizionate le serrande e visto che siamo in tanti ad avere questo problema, faresti felice molte persone :-)

[@MicheleP]

ciao silvio! abbiamo provato diverse volte, ma purtroppo non c'è modo con DDT4ALL di settare le elettrovalvole delle bocchette del clima! Bisogna andare in Renault e fanno loro la riprogrammazione

[@kingsalimalharthy]

Hello brother, How are you? I need to know several things about koleos 2018, regarding to starting engine remotely. First when i turn on engine remotely it will stay on for 5 minutes or so then it will turn off, is this normal? Secondly, shall i wait for 10 minutes when i need to start the engine remotely between two starts? because when I do within 10 min it will not work! Thanks, Salim

[@MicheleP]

Hi Salim! turning the engine remotely means that you only turn on the dashboard by pressing the start/stop button for few seconds?

[@enronkulla9495]

Ciao Michele io ho montato le fari led originali Ma quando sono le luci Spegni non mi fanno le luce abbagliante quando sono accese le luci funziona tutto ok C'è qualche configurazione

[@brunomartinho7718]

already got it 👍. a question friend, is it possible to connect automatic maxima as we have the original means?

[@jcolak]

Hi, is possibile to hack windows. On key long pres to down windows??. I can when is windows down long pres lock and windows is closed.

[@MicheleP]

With the megane is only possible to close windows, not open them

[@steveturnbull9542]

Can the LED indicators on a 2019 RS280 be made to work like an audi's?

[@MicheleP]

You mean?

[@steveturnbull9542]

@@MichelePMy front DRL also have the indicators can they be made to flow/move in the direction instead of just on/off flash

[@LEvans2k6]

@@steveturnbull9542 Hi Steve, was there an answer on this question you asked as I was about to ask the same? Thanks

[@MicheleP]

Oh you mean the dynamic indicator. Unfortunately not, you have to buy third part accessories, there are a lot for the megane that behave like you want

[@gunvald89]

Is their any way to activate multi-sence on a megane 4 130 zen?

[@MicheleP]

yes! it's possible! i'm preparing a tutorial on how to, so please stay tuned for it!

[@gunvald89]

@@MicheleP looking forward to it! Du you have any guide to witch obd2 adapter to use it?

[@MicheleP]

in every video there's a link in description with the OBD2 tool to use!

[@autoservice4399]

Can you turn off TTPS tire pressure sensors?

[@MicheleP]

yes, i'm going to make a video in the next week!

[@ubaldasx3859]

Hi your car petrol or diesel? Thanks

[@MicheleP]

It’s a 1.6 diesel

[@ubaldasx3859]

@@MicheleP my is 1.5 but sometimes sluggish edc

[@alhoceimacity3132]

hello Michele hope you are fine? Your youtube channel is amazing!! I'm learning from you thank you so much!! I have a probleme if you could solve it? I have a Megane IV I tried to activate the cornering light but I get a probleme of connection with the OBD2! it deconnect from the softwar automatically!! :( :( :(

[@MicheleP]

ok, try to increase the connection timeout; you'll find it in the lower part of the DDt4ALL interface

[@peterfitzgerald3275]

Great videos, thanks for all the info. I was about to buy the obd2 but I wonder if you know the answer to my question? It says not suitable for diesels. I know these tweaks are not touching the engine, so do you know if it will still work on my 1.5 diesel play model? Thanks, Pete... keep doing the videos.

[@MicheleP]

Mine is the 1.6 diesel, never had a problem whatsoever 👍🏻👌🏻

[@theeagleeye-usa]

Please sir can you show us how to activate mirror puddle lights on megane 4 ???

[@MicheleP]

you want to activate them when?

[@theeagleeye-usa]

@@MicheleP when i lock unlock my car. When I unlock/lock my Megane 4 the front and rear leds turn on ( because i activate this in the menu of the car : welcome lighting ) but the mirror puddle light seems to not working. I don 't know if i have to change something with ddt4all. By the way, you make very greate videos, thanks for all

[@manuelcrescentini9676]

Ciao, volevo chiederti.. esistono app per telefono o tablet per poter fare queste modifiche tramite il ddt4all? Senza passare dal Pc?

[@MicheleP]

ciao! credo esista qualcosa del genere, per android! ma non te lo consiglio in quanto è un sistema molto più instabile. e siccome si vanno a toccare parametri abbastanza delicati, non mi fiderei molto

[@doorht8721]

Well done, ty Michele prety silenc uses ty again

[@robertodefilippo5567]

I have a question: do you know if it is possible in "Multi-Sense" options to keep the engine seting on the SPORT or PERSO option, avoiding the countdown towards the "NEUTRAL" setting?

[@MicheleP]

me and other guys are trying since a year to find how to disable it, but it seems impossible to do :( actually is a pain in the ass, but at this time we are unable at the moment :(

[@adamyounes1063]

Obd wifi ? Obd bleutooth ?

[@MicheleP]

mine is WiFi

[@calahca69]

Awesome!

[@MicheleP]

thanks!

[@massimilianomastropietro2675]

a quando il video sulla Kadjar per i sensori da visualizzare davanti i quadro del cruscotto?

[@MicheleP]

eh li sto facendo tutti.. solo che non vivo per youtube, ho un lavoro e purtroppo ho poco tempo! ma sarà il prossimo video che uscirà

[@yoandiherrera]

@@MicheleP sai per caso come lasciare il led di posizione ascesso al 100% quando si ascendono le luce anabbaglianti?

[@MicheleP]

Non si può fare, e comunque è illegale farlo. Il led deve avere il 60% della potenza quando sono accesi gli anabbaglianti!

[@yoandiherrera]

@@MicheleP qui in Germania non è illegale. Poi la talismano e la megane con led die fabbrica ce l hanno al 100%

[@alhoceimacity3132]

how can I contact you??

[@MicheleP]

Write me a mail: [e-mail]

[@enronkulla9495]

Amico solo tu mi puoi aiutare per configurare le luci

[@enronkulla9495]

Solo badanti non funziona al giorno

[@MicheleP]

⚠⚠ NEW OBD 2 INTERFACE TO USE ⚠⚠ Guys Important: USE THIS OBD 2 INTERFACE INSTEAD THAN THE ONE I MENTIONED IN VIDEOS. THEY “MODIFIED” IT AND NOW IT NO LONGER WORKS WITH DDT4ALL. USE THIS ONE, IT’S 100% OK 👉🏻 amzn.to/3UkIrdQ CHECK OUT THE FULL PLAYLIST OF DDT4ALL HACKS AND ACTIVATIONS FOR OUR RENAULT: kzbin.info/aero/PL0_lM34jB4W-P_XvmnT1dxEKMvjcf8WKj