Great job. Don’t forget anytime there’s only one cable attached to a battery, you want it to be the positive one. Therefore when you reinstalled the cables after replacing the battery, you wanted the positive battery first, then the negative not vice versa just a extra safety measure.
@jordansterner18924 жыл бұрын
For people saying positive goes first… You’re not wrong but the whole point of taking the negative cable off first and putting it on last is so that the body of the car is not grounded while you’re messing with the positive terminal. This is so you don’t short something if your wrench touches a metal part in the engine bay while you’re removing/attaching the positive cable. Given the fact that he was using a driver, which has a mostly plastic housing, and most of the engine bay is plastic, it really doesn’t matter in this case as there was really no risk. But yes it is good practice to put the positive back on first.
@dougpoulton5544 Жыл бұрын
Negative comes off first and on last unless you're a gambling man and going for a 50/50 chance of popping a diode in your alternator.
@timtraynor80886 жыл бұрын
I’m a 37 year tech And your channel is the only one I seem to watch all the way through! Peace brother
@steveburke39233 жыл бұрын
So, Just a suggestion. I like to plug the "memory saver" into the vehicle's port before I attach it to the 12v. source, just so there are no issues wiggling the plug into the vehicle. Probably not a huge deal. Just me.
@mtsflorida5 жыл бұрын
Did everything correct except replace the battery connectors. Should have reconnected the positive first, just as you removed it after the negative.
@naturestan5 жыл бұрын
Glad to see Mechanics are getting some direct profit from their tools and expertise. Wife just paid $60 labor at the dealers to install a new battery. Video's show about a 10 minute swap time (if that) What sawed me off was it looked like they stripped all my wax-on off the car when they ran it through their "free wash" - wish they'd of asked or notice it had a deep shine to it or something.
@ianmellor91222 жыл бұрын
Why is the negative cable going back on first? Your supposed to put positive on first then the negative on last as its earthed/ground
@Rectitude4U5 жыл бұрын
Positive first on install.
@m5p944 Жыл бұрын
Exactly
@Feemy Жыл бұрын
Yep, this was a botch job.
@mikemccormick612811 ай бұрын
This looks like a pretty good solution. A couple of hours ago I ordered from Amazon a memory saver that goes from the OBD2 port to either a 9v battery or an electrical wall outlet. I think my choice sounds pretty good too.
@emangee9268 Жыл бұрын
Awesome! Thank you for sharing such valuable information! Shout out to all technicians doing the most to stay informed and informing others on service procedures! 👍
@jimzimmerman52886 ай бұрын
The battery you took out had a handle on it but you used that clamp?
@robswrenches95017 жыл бұрын
That's a nice alternative that I can use with my compact jump pack. I have the attachments, all I need is this connector...sweet!
@ronr88008 ай бұрын
Excellent video, thanks for taking the time to make a video for folks who might not know any better! If a person does buy the battery jumper from Noco it will also boost batteries if needed and is portable. So a person gets to excellent uses.
@melvy677 ай бұрын
Thank u very much learned how to avoid loosing my car memory &changing a car battery the safe way good job 100%👏🏾👏🏾👍🏾👍🏾👍🏾
@johngilley35187 жыл бұрын
I need that. Year's ago ( like 1987) I bought a Blue Point battery saver that was just a 9 volt battery plugged in to the cigarette lighter, never worked on any vehicle. I still have it around somewhere. Thanks for the update on how not to piss off your wife when you change her car battery 😎.
@vegajf515 жыл бұрын
I used this one and it worked. www.amazon.com/dp/B07KCN69LJ?ref=myi_title_dp
@jonathanriojas21776 жыл бұрын
How come you put the negative back in first?. Always heard its positive first when you put them back on.
@micahhill47865 жыл бұрын
Hope you are joking 😂😂😂😂..........right
@AveGuy15 жыл бұрын
It is the positive first when putting back on. He made a mistake.
@AveGuy15 жыл бұрын
@@micahhill4786 you are an idiot. When putting back on the positive goes on first. I will not tell you why because I'd rather you go through life being an idiot. Enjoy your stupid life. Fool.
@borttort38855 жыл бұрын
My name is not important u prolly don't have a clue why.🍻
@Magnabee974 жыл бұрын
My name is not important Why can’t answer the man’s question without being a pompous ass? You probably don’ even know the answer.
@joehyundaitech79613 жыл бұрын
positive goes back on first brother hyundai tech . and I use the battery handles that are attached to the battery when removing the battery
@su-hyunchin23853 жыл бұрын
How come you are negative on first? Others are negative first off and positive on first
@wheelchair21206 жыл бұрын
The old battery already had handles on it 😂
@huntedbybears45453 жыл бұрын
he don't play cracked plastic games
@momtazjee2 жыл бұрын
hi Snap On, thanks for uploading this tutorial. what makes the GB-70 support a memory save function as opposed to the GB-40 version? just trying to understand better.
@ghosttownsentinel52886 жыл бұрын
Aside from the fact that your old battery already had carrying handles, you attached the negative terminal first when installing the battery. Crazy!!!!
@localeboy8085 жыл бұрын
I agree always positive first... Smh
@1militarymike5 жыл бұрын
You made two mistakes, the first is, you forgot to warn that the positive terminal when disconnected it's still live, so if it touches the body or engine there will sparks - ie a short to earth, easy way to do this is just to roll your rubber glove over it when you disconnect the positive terminal. And when replacing a battery you always disconnect the negative first as you have done. but then you went wrong you always connect the positive first and the negative terminal last.
@wwaldok2 жыл бұрын
Speed should never be the apparent focus of any operation. It leads to critical mistakes. Ditch the screw gun. Use hand tools and impress your viewers with the planned sequenced execution of your tasks.
@juvaknight5 жыл бұрын
No wonder my car kept on stalling after I change the battery it need it to relearned throttle body and air/fuel mixture I guess 🤷🏻♂️
@juanfelipe84842 жыл бұрын
Does the amperage mater? I have the 1000 amp noco.
@eddie44143 жыл бұрын
Why did you put 124R instead of the AGM battery is had? Correct me if I'm wrong or did you put in the wrong battery. Looks like you needed to put in an H7AGM
@max410505 жыл бұрын
Okay so if have to do a repair that requires disconnecting the battery won't this memory saver interfere just as much as having the battery connected even with the battery disconnected since this memory saver is practically doing the same job as the battery ?
@macmike25 жыл бұрын
You put the words I wanted to say!
@starbasef10 ай бұрын
I think the memory is in the memory saver, not the onboard computer. After the new battery is connected, the memory downloads and, thus, the settings are retained. If you need to disconnect the battery for repairs on the car, the memory is retained in the saver.
@michellepernula87211 ай бұрын
Do you HAVE to use the memory tools or does it permanently mess things up to point you can't reset things without paying a mechanic? Or is it a matter of just resetting clock and radio station preferences? Asking for my daughter who's dumb about cars.😅 I want her to see the answers. 😂
@zumik835 жыл бұрын
You took - than + than you put - than +. Very logical ! And you don't need that expensive NOCO or any other 200 dollars jumo starter. All you need is that OBD cable, of course, plus a little 12 V - 5 Amps AGM battery that costs about the same as the OBD cable. You than cut the lighter connection and hook up the two wires on + and - of the little AGM battery. That 5 Amps can keep the ECM running for days, if needed. If you want it to keep the ECM alive just as long as you change the main battery, like an hour or so, you can go even cheaper by buying a 2 Amps or 3 Amps battery. I have the little battery glued in a box, for practicality, along with the OBD cable and I used it 4 times in the last 8 month without the need to recharge it. One of those 4 times, I kept the ECM alive for more than 24 hours, I wanted to properly recharge my main battery. So, you just open the box and take out the OBD connector and you connect it to the car and all is done, the ECM will have power. It's a very practical and very cheap project.
@bmw123474 жыл бұрын
Do you need to turn key to ACC or ignition at all? Do I even need to insert the key?
@zumik834 жыл бұрын
@@bmw12347 Nothing at all ! Just don't touch the + and - car's terminals OR the + terminal to any part of the car. There is still current flowing from the little battery all the way to the battery terminals. It will keep all the electronics alive while you finish changing the battery or even while you charge it for a day or two away from the car, if that's the case. You can pick any amperage-hour from 2 to 10 and it will do the job well !
@samkitty58945 ай бұрын
I connected my OBD2 saver plug into the OBD2 port of my car, and then connected to cable to the booster box. It did not save the codes. I noticed you connected the booster to the OBD2 plug first and then plugged it into the OBD2 port. I wonder if that's what I should have done.
@yumpinyiminy9634 жыл бұрын
3 years on a battery. What piece of crap. Plus I love that plastic piece on top of it.
@stanislav96084 жыл бұрын
My Santa Fe is 6 yrs old and battery is still showing on scangauge 14.1 V when driving and 12.8 before starting
@dalemettee114711 ай бұрын
The safest way to disconnect and reconnect the battery is to take off the negative first then the positive. /Reconnect in the reverse order.
@d64872 жыл бұрын
At 2:42, What is the name of the red cable that you hooked up to the Noco Genius GB70? Where can i buy that cable? Does it come with the device?
@eduardogarzon12783 жыл бұрын
Excellent explanation, thanks .
@MarzNet2568 ай бұрын
Cool. I wonder if I could use an m12 battery.
@scottpearsontoolsmore1857 жыл бұрын
Great video thanks my friend. I have the type you used and also I have the one with the battery pack. Thanks again for the great video
@adamhedges59057 жыл бұрын
Whats the part number on that impact boot?
@koskey067 жыл бұрын
Yes. Now im a master mechanic. Could never figure out how to change a battery. Jp love the vids
@austinreeves19316 жыл бұрын
Pos goes first...………………………………..
@blinkingbrakelights31785 жыл бұрын
My Audi Q7 requires us to reprogram the car after changing the battery. Would this save me from programming the car when I change the battery? I just wanna make sure.
@donwolfjr15 жыл бұрын
Great video and it's just what I wanted to know!!! Thank you!!!
@Frankie_M.7 жыл бұрын
Cool video I wanted to ask can you change the battery and not lose the memory or settings while the car is running and disconnect the battery and change it out will that affect anything on the car 👍🏼👍🏼👍🏼✌️
@travisgustin46775 жыл бұрын
Frankie M. I work at Honda and change them with the car running when someone has the memory saver from the tool room. Pretty much the same effect.
@bmw123474 жыл бұрын
@@travisgustin4677 are you saying you don't use the memory saver?
@uzielmartinez83737 ай бұрын
Always do the rule- negative first,negative last
@ramonperez55278 ай бұрын
WHAT'S WITH ALL THE LIGHTS ON THE DASH?
@michellepernula87211 ай бұрын
Do you HAVE to use the memory tool? What if you use a different battery than the maker of your car hut a compatable one?
@mikemaid5350 Жыл бұрын
Can you use a battery charger hooked to the terminals before you remove battery?
@samkitty58947 ай бұрын
NO...
@kevinsheeler65 жыл бұрын
POSITIVE GOES ON FIRST! NO BIG DAL GREAT VIDEO!
@billyhopkinson84927 жыл бұрын
Hey I wanted to ask a quick question. I’m a young guy going through trade school to be a mechanic. However I wanted to ask your opinion on torquing everything down. I’ve been told that I need to torque absolutely everything but for years all the techs I know don’t torque anything. Just wanted to know your opinion on whether tech’s have to/should torque everything.
@nsoper194 жыл бұрын
Does this adaptor work with a 9v battery?
@tymebomb607 жыл бұрын
how come you dont have the snap on 18 volt battery saver
@HektorBandimar4 жыл бұрын
Useful video, thanks.
@1fnjo7904 жыл бұрын
Atypical dealer LOF upsell. Show me the printout from the battery analyzer that my battery tests bad. Most OE batteries should easily give you 5 to 6 years of service, so unless the tech walks me to the car and either shows me my 3 year old 650 CCA OE battery is causing considerable acid leak corrosion damage to my cable clamps and Hyundai will prorates the battery for half off cost ,plus only .3 labor I'm not biting. LOL
@Velocity0428 Жыл бұрын
Did it also keep your fuel consumption read out?
@TheHoth14 жыл бұрын
I wonder if I should use this memory saver when I change my spark plugs and clean my throttle bodies.
@terryshort72784 жыл бұрын
No need to. It's only for disconnecting the battery You dont need to disconnect the bsttery to do the jobs your planning to do
@adatshhc2 жыл бұрын
The battery booster cannot do this at the terminals with out using the cable in the cabin?
@ImNotADeeJay3 жыл бұрын
this procedure is good for any car with OBD port? how to know beyond what year are considered "modern"? isn't there a risk of frying the ECU doing this? thanks
@TomisaLami10 ай бұрын
I have the GB 70 boost HD will it still do the same thing if I have the adapter?
@trevorvadeboncoeur35607 жыл бұрын
I have a question. As you first started to work on cars what brand of tools did you use the most?
@TheSnapOnToolReview7 жыл бұрын
As a Canadian I used Mastercraft but my Dad also was a Mechanic and passed down a lot of Snap-on and Mac to me.
@d.s.9632 Жыл бұрын
@@TheSnapOnToolReview I recently tried to use a memory saver on a 2022 car. It was a cigarette lighter male plug to obd2 port. I used a 12v 10 amp source and I blew a fuse that was stating itself to be 7.5 amps. Now I am seeing this video use a battery source that I believe produces way more amps at 12 volts. I checked on amazon and your jumpstarter provides 15amp at 12 volts. How the heck did you not blow a fuse? Perhaps that car has a higher fuse in the obd2 port circuit? Im trying to make sure because i cant find any good answers anywherw
@mikecochrane2074 Жыл бұрын
thanks for the video. can i use this kind of device to keep my baiid device powered on while changing parts such as a starter, alternator or any other electrical device on my truck, or does this send power to all those other things also? rendering my maintenance just as dangerous as having the battery connected?
@doglife3 Жыл бұрын
Can I use a solar gen to plug the memory saver into?
@rz97082 жыл бұрын
Can I just plug my jump starter on and keep it on while I disconnect the battery? Or will that mess something up?
@greekmaster1001 Жыл бұрын
I have the gb70 boost not the genius I'm wondering if I can do the same thing swapping a battery the light didn't go on the memory saver when I plugged it to the 12v out
@cwejter Жыл бұрын
Do I need a spare battery to hook it up or I can just use another car which is running or it's lighter socket?
@Toolaholic77 жыл бұрын
VW/Audi including BMW,the computer gets wiped out completely when the Battery is changed and has to be reprogramed again.Luckily at my dad's shop,have the GM Tech 2 to unlock the radios.Lot of the radios are programed to the vehicle now
@RND-USA9 ай бұрын
Hi! Can I use one of these when connecting my multimeter in series with the battery terminal to test for parasitic drain / current or would it mess up the readings?
@ChaosGarage7 жыл бұрын
Good tip!
@mastacrx5 жыл бұрын
Do the ignition has to be on as there's no power supply to the obd2 slot until key is ine the 2nd position?
@bmw123474 жыл бұрын
Did you find out?
@mastacrx4 жыл бұрын
@@bmw12347 No, it didn't have to be on position two. Worked a treat.
@bmw123474 жыл бұрын
Thanks
@MoneyMarcMes7 жыл бұрын
What years of vehicle is this most important? 2015 and up?
@joelcrow10 ай бұрын
I hear that Italian tune up ;) 04:37
@charlesdowns16912 жыл бұрын
not worried about radio but other issues are more important.
Would oem remote starter be affected after changing battery on 2010 sierra?
@Kodazot3 жыл бұрын
If I put not noco put new battery can I still save my memory
@waynebeck7801 Жыл бұрын
Are you sure you are on the 12 volt out? The jacks are different the cigarette lighter cable fir my NOCO will only connect to my input
@waynebeck7801 Жыл бұрын
I am a dumb ass! I figured it out. Thanks for the video
@brandonbassett78875 жыл бұрын
Ok i have a jumpack that’s portable like this but it doesnt have a cig port only usb. What if i get a adapter that is usb to cigarette port from amazon for 5$ will that work. Then use the memory saver cable
@jacobdellinger49316 жыл бұрын
hope you and the family have a rocking kick ass thanksgiving. also do you have a store to buy shirts or stickers that i can put on tool box so i can represent lol
@suezanarms12875 жыл бұрын
I got a question??? If the battery is dead all the way where the clock resets to 12:00 will that screw up everything when you jump start it and shut down all of those extra gadgets? I WAS a tow jockey for 20 years and came off the road and going to school to become a tech. I'm sorry I haven't towed in the last 4 years. Is this an issue with all push button starts? OR? A common courtesy for your customer? But you claim that it could keep the windows from rolling down? So what's the deal?
@andrem7th3 жыл бұрын
any alternative to gb70? pretty pricey for me
@Franksinatra96 Жыл бұрын
What if the battery is dead then it's not needed
@RR19762 жыл бұрын
Don't for get to add some kind of no-corrode solution so that the contacts don't corrode and ruin the battery prematurely.
@nicholaswalsh30167 жыл бұрын
so it just keeps the pcm and modules alive ?
@karen4smith Жыл бұрын
What a horrible racket nearly put me off watching the video!
@endofword20125 жыл бұрын
Just put a 12 Volts Batt connect to the terminal and just need less than a half amp to do the job. Have to be more carefull not disconect wire...
@yeshua4ever2895 жыл бұрын
I'd like to see the car turn on after replacing the battery.
@micahhill47865 жыл бұрын
Me too that tells us if it works🤷♂️🤷♂️🤷♂️
@mikefranklin352811 ай бұрын
Good info but your camera spinning gave a headache.
@alanhall42006 ай бұрын
So I have to buy a $200 electronic gizmo to change the battery in my truck? No thanks. I'll take the truck to my mechanic.
@MrBoz20047 жыл бұрын
Am I wrong for saying I usually leave the car running when I do the battery change?
@TheSnapOnToolReview7 жыл бұрын
+MrBoz2004 on newer cars that can be a very bad thing.
@MrBoz20047 жыл бұрын
The Snap-On Tool Review exactly, hence the usually, some I do not. But still I see and understand your point.
@BruceAllentools7 жыл бұрын
MrBoz2004 this can cause voltage spikes and will ruin modules on newer cars. Never change the battery with the car running. You may get lucky but before you know it that luck runs out.
@JSTruckRepair7 жыл бұрын
I had a customer car not wanting to start. Battery terminal corrosion like crazy. Tested the battery and found that was the problem. (Newer gen Ford Focus) I put in a new battery and the car would never start. Found out that during the battery swap the PCM fried. Another guy I work with said focus’s are bad about that, and when terminals corrode they start corroding through the battery cables right to the pcm and when you change a battery it triggers it to fail. Does that sound correct or could a simple thing like in this video prevent that from happening? Thanks!
@Charles-in3zt Жыл бұрын
I am having the same problem after putting in the new battery. My 2017 Envision will not do anything. Can you expand on what the PCM is?
@JSTruckRepair Жыл бұрын
@@Charles-in3zt a pcm is the Powertrain Control Module. Computer that controls a lot of things. Never jump to conclusions that the pcm Is bad until someone who knows what they are doing can confirm it
@BuscandoSanaDoctrina4 жыл бұрын
Sr I was used the same equipment and don’t work in a corolla 2000.... with the switch in off... I need to put the switch in on for work!?
@stanislav96084 жыл бұрын
Could you give more details when you turned switch on and when you turned it off
@gecko43105 жыл бұрын
3 year old battery already hneed changing. What the heck.
@ImNotADeeJay3 жыл бұрын
do you live in a very cold place? I use Yuasa batteries both in my car and my bike and seem to last at least 4-5 years
@MEMIN919117 жыл бұрын
Noco sells the Obd memory saver so you won't have do all the wiring jumping Noco part # GC012
@jamesjonah48215 жыл бұрын
He said shit lol
@codyfinchum8906 жыл бұрын
nice 300 dollar ticket
@davewatson21245 жыл бұрын
Not impressed.
@spencerlipscomb77957 жыл бұрын
It's snap on fucking Wednesday
@RiseNgrind3654 жыл бұрын
dope ending to video (musically)
@dgessence3 жыл бұрын
This easily could have been a 50 second video fuck me
@gordonfreeman54347 жыл бұрын
duh
@jacobdellinger49316 жыл бұрын
*come damn i cant type lol
@bohawkins52587 жыл бұрын
I’d be pissed if that was my car and the battery insulation didn’t fit the battery.. I’d be a complaining customer for sure.