Meng BMW R nine T 1/9 scale bike model 오픈박스 리뷰 가조립 제작기#1

[@jitihunt21]

Previously I saw a bad review on the Meng Ninja H2R where someone said the Chrome Parts on the Meng peeled off easily. Do the Chrome Parts on the R Nine T peel off easily too?

[@PLAMODEL_CRAFTER]

it couldn't be removed with Clorox, Lacquer Thinner, I just overcoated it with a surfacer. I haven't confirmed whether it will physically come off.

[@jitihunt21]

Thank you for the info

[@레몬봉봉-g1o]

타오바오가 요즘엔 직배송도 되서 좋아졌습니다. 배송도 생각보다 빠르더라고요.😮

[@PLAMODEL_CRAFTER]

덕분에 선택의 폭이 너무 넓어져서 좋긴한데... 돈은 한정이고 ㅋ;;

[@istvanbutsi5040]

Hello Hobby Crafter! Have you bought the rear shock absorber replacement spring somewhere, or have you made it by yourself?

[@PLAMODEL_CRAFTER]

"compression spring" I bought it at a local market. I don't know where you live, If you search, you can easily purchase it from an online market in the area where you live. ex)You can also find it on eBay by searching for compression springs.You can choose the spring size you want. A diameter of 1.2mm to 1.4mm is recommended.

[@istvanbutsi5040]

@@PLAMODEL_CRAFTER Thank you for your answer. I will be looking for such a spring based on the information provided. Otherwise I live in Hungary.

[@PLAMODEL_CRAFTER]

@@istvanbutsi5040 or Aliexpress EX) aliexpress.com/item/1005005978613752.html?spm=a2g0o.productlist.main.47.6cb6nriZnriZmD&algo_pvid=1c4081c7-6924-4fbf-9169-cb7060892855&algo_exp_id=1c4081c7-6924-4fbf-9169-cb7060892855-53&pdp_npi=4%40dis%21KRW%212723%212723%21%21%211.95%211.95%21%40213bce9317150016657864357e2bde%2112000035148716704%21sea%21KR%211736276282%21&curPageLogUid=mYFTGKSyHcaQ&utparam-url=scene%3Asearch%7Cquery_from%3A&gatewayAdapt=glo2kor so many

[@istvanbutsi5040]

OK. Thanks again.

[@istvanbutsi5040]

Hello Hobby Crafter! How did you remove chrome from the plated parts?

[@PLAMODEL_CRAFTER]

clorox/Thinner not remove. just surfacer over coating

[@istvanbutsi5040]

​@@PLAMODEL_CRAFTER Thank you for your answer. I have also found that these substances do not remove it.

[@PLAMODEL_CRAFTER]

@@istvanbutsi5040 I haven't tried it yet, but I think I should use urethane thinner.

[@istvanbutsi5040]

@@PLAMODEL_CRAFTER OK. I will try it. Thanks.

[@녹차추출물-t6p]

중국 업체인데 품질이 굉장히 좋았습니다 as도 업체 사이트에서 받을수있는데 답변도 빠르고 친절합니다 다만 배송비가 비쌉니다 ㅎㅎ 혹시 모르니 박스안에 있는 일련번호 잃어버리지 않게 잘보관하시는게 좋습니다

[@PLAMODEL_CRAFTER]

오호 제조사 AS도 가능하군요! 좋은 정보입니다^^

[@마르코-r1i]

영상 잘 보았습니다^^ 제품 구매처 링크 알려주세요

[@PLAMODEL_CRAFTER]

판매처는 재고 조건, 가격이 판이하게 다른터라, 또 해외 직구는 배대지를 끼고 해야되서 발품을 팔 수 밖에 없습니다만, 예를 들어, 국내 재고 없다면 가장 빠르게 구매하는 방법은 "알리 익스프레스"가 가장 만만하긴 합니다만(검색해보면 재고 가능). 여튼 구글링 해서 배송 시간, 가격 등을 비교해서 구매하시는게 정답입니다.