Рет қаралды 876
Mercane G3 Pro Electric Scooter review
or KUKIRIN G3 Pro
or Vlaken G3 Pro
or
...whatever the scooter is called in your country, I have tried my best to review it here for you today. The camera is tilted at that specific angle btw to best hide the surrounding areas and people's faces all for privacy reasons. So, grab some popcorn or whatever you would like to eat lol and enjoy.
Scooter instructions
1. Insert the key, and turn the key to the right to power it on.
2. Press and hold the [power] to switch the machine on and off.
3. Short press the [power] button once after powering on to switch gears, divided into three gears.
4. Short press the single-drive switch once after powering on to switch between single-drive and dual-drive modes.
5. After the scooter is turned on, press the [power] button three times in a row to enter the menu setting interface, the display P1, P2, P3, P4, P6, P7, P8, Pa, Pb, Pc will be displayed. Press and hold the [power] button for 3 seconds, the value will flash:
---------------- Parameter meaning: ----------------
P01: Set the Speed/Mileage Unit, 0=km; 1=mile.
P02: Voltage level setting: (default 52V). If adjusted, the battery level will be confused.
P03: Wheel diameter: default 100 (100 means 10 inches). If adjusted, the speed display will be confused.
P04: Number of magnetic poles for speed measurement: range: 1-100, default 30.
P05: Cruise Control mode: 1 means to set the cruise control, 0 means cancel cruise control.
When the Cruise Control is turned on, the cruise icon flashes.
P06: Sliding start, Static start startup settings. 0: zero start/static start; 1: non-zero starts/sliding start. The display shows the current startup mode: the non-zero starts will display NON. (In zero start mode, press the accelerator/throttle starts directly; In the non-zero start mode, you need to use your feet to help the scooter slide above 5km/h and press the accelerator to start.)
P07: Set Speed Limit mode. You can adjust the parameter value of P07 to limit the speed according to the maximum legal road speed stipulated by your country.
P08: Sleep time setting: 0 means no sleep; other numbers are sleep time, range: 1-60; the unit is minute. (default 5 minutes)
PA: Start Strength Setting, which is the starting drive strength when the throttle is pressed after switching on: range 1-5. 1=min, 5=max; default 1. If you feel that the start-up force after pressing the throttle is too strong, you can adjust it downwards.
PB: Brake strength setting: (default 0). not adjusted.
PC: Total mileage clear. Unrecoverable after being cleared. 0 - The mileage data is maintained and not cleared. 1 - The mileage data is cleared and reset to zero. If set 1, automatically exit the parameter setting page, and clear the mileage data, which cannot be restored.
Please like and Subscribe if you enjoyed
*THIS VIDEO IS NOT IN ANYWAY SPONSORED BY ANY COMPANIES ORE BUSINESSES MENTIONED IN THE VIDEO. EVERYTHING WAS BOUGHT WITH MY OWN MONEY*