Mercedes All MY & Models w. K KE Jetronic - Cold Start Valve, hot start & fuel fume issues debunked

[@garanincorp.5579]

Thank You!

[@robertroper2307]

Excellent very informative

[@alexgander1013]

Very nice presentation. Hopefully will help with my no start problem

[@grungedude2]

Thank you for sharing this information.

[@2620patrol]

Very nice informative video thank you sir

[@r3FMusic]

Thanks..

[@portechautomotion1945]

excelente informacion

[@fixityourself1111]

Hi thanks for all the info, do you know the correct way to adjust or the base settings for the meter head flow adjusters...the little grub screws that set the spring pressure for the diaphragm for each injector. I can only find basic info and its 3.5 turns out. Great if you could advise. 👍🙂

[@inovahightechltd]

No, not sure. My understanding is that this has to be done with running fuel on a fuel equalization tester.

[@KertmeLi58]

Hello, I'm Yavuz from Sivas/Turkey. First of all, thank you for the videos. I have a question, My vehicle is a 1985 model 500 SEL. It works fine at idle, but when I step on the gas, the suction is not strong enough to press the valve. It gets too hard. what would be the reason. thanks.

[@inovahightechltd]

Hi Yavuz, Please watch all the videos in this playlist kzbin.info/aero/PLO4ZlzALkZVq3NysVV7vqO7BiZ9Kd_97D You may find your answer here

[@KertmeLi58]

@@inovahightechltd I watched all the videos. But the solution is not here. I changed the fuel distributor's o-rings. Very good when I first put it on. It does not eat gas after using it for like 10 minutes. The sensor plate gets very hard, it eats gas when I press it with my hand.

[@inovahightechltd]

@@KertmeLi58 I would check the Fuel Injectors and you may need to rebuild your fuel distributor and do a fuel pressure test. These engines use a lot fuel compared to today's car's. Just keep that in mind

[@KertmeLi58]

@@inovahightechltd Thank you so much.

[@jimmicrackhead12]

Unfortunately Bosch classic don't work no more

[@inovahightechltd]

I am not sure on what exactly are you saying? The Bosch Classic Website is working: www.bosch-classic.com/de/en

[@jimmicrackhead12]

@@inovahightechltd Thanks, that's a little bit different to the one in your description sorry. I was trying to find the schematic of the KE Jetronic that you have in your video

[@inovahightechltd]

They are listed on the German version of their website www.bosch-classic.com/de/de/services/downloads#lehrtafeln Klick on the button “Mehr laden” to see the entire list of their available Lehrtafeln

[@jimmicrackhead12]

@@inovahightechltd wunderbar 😊