Mercedes B200 Throttle, Injector & Intake manifold removal

Hi everyone: in this video I will show you how to remove the intake manifold of a Mercedes B200 2.0 liter engine.
With this tutorial you can learn how to remove the variable intake valve, throttle body and fuel injectors.
Thanks for watching and please subscribe!

[@StephenDavies43]

Thank you for posting this. I was struggling to get this lot apart. Your video saved me many hours!

[@Cielusrobotics]

+Stephen Davies it is a pleasure to help you.

[@davidestate]

Make sure to always mark the fuel injectors so you know where each one should be plugged back in. Otherwise, nice video for such a complicated engine design.

[@rudolphjansevanvuuren6528]

Thanks for posting - helped me a lot when I replaced my injectors recently. Some comments: I removed the manifold without loosening or sliding out the variable intake valve. Why did you have to remove that? Just for clarity, the total number of bolts fixing the manifold is 9 ( 6 short ones and 3 long ones). You make it look very easy - took me more than 3 hours to remove the whole lot - I guess 2nd time will go quicker.

[@Cielusrobotics]

I edited the video but it was very hard to disassemble

[@drew42drew42huthut]

Hello Rudolph, Can you help me locate the 9 bolts to remove?

[@AceKylar]

I need to do this in order to take out the starter motor right? without jacking it up method.

[@hexacetat]

Its even good for the thermostat change. Maybe add W169 W245 to the title as its the same.

[@deojett]

hi do you know the torq for the torx bolts on the throttle (butterfly)

[@alejandroj.giustiluengo6979]

Great video 👍

[@vincenttran169]

nice video but i was take out 6 bolt but the throttle not come out

[@tamaspusok2793]

Thanks for posting!!!

[@merodig]

The variable intake valve has 2 bolts, nearly broke mine trying to force it out!

[@tomasnokechtesledger1786]

Looks like they welded the bolts. Damaged the Head and the one that fix the dipstick tube didn't move!

[@wewe859]

i want to know around how much does it is to replace throttle body, and my car is loosing speed , i was told it was the throttle body . can it be the harness wires making you loose speed as well? e320 mercedes 1995

[@Cielusrobotics]

first make sure your throttle body is mechanical type or electric motor driven; second if it is mechanical type it has attached a Throttle Position Sensor (TPS) and it could be the reason your car is not giving all the power. Then replace the TPS.

[@adtynkr]

I have a 2010 Mercedes B200 Turbo, sometimes I hit the gas and only after 3-4 seconds, the engine wakes up suddenly and moves. This is sometimes fixed if I turn the car off and turn it back in but I never know when it happens again. Is it the throttle body? After cleaning or replacing it, how do I make the car relearn throttle in B200?

[@kitecattestecke2303]

There are "better" odb2 handheld testers which can start the relearn cycle, usually after the battery was off for a long time it can relearn by pushing throttle 100% before ignition, the turn on ignition (no motor start) and then letting throttle off immediately after the ignition is on now(all the light are on) without starting the car. On the return way the body learns 100%-0% by the gas pedeal commands, that is how it worked on the early models

[@alikbunt2635]

Thank you , Its were good !

[@MP-mu1kw]

Excellent video! Do you know if it is possible to get to the starter motor by removing the Intake Manifold and the Air Filter box?

[@kitecattestecke2303]

Some people say yes others say no in the comments on KZbin so? I think it should be possible but then the bolts heads are mangled by some lunatics? You can always use pliers to get the bolts out yay

[@habibizhafranzhafran8343]

Mobil ku kadang2 saat berjalan mati mesin.lalu di start ulang nyala kembali

[@vladimirpetrov1578]

Впечатление что мужик не знает что делать. Типа мечется то туда то сюда. Но так бывает в первый раз.

[@spikali6964]

hi.thanks a lot for the helpful videos you upload.i would like to know where is the exhaust gas (egr) valve located on the mercedes a 150 w169.thanks

[@mediy5085]

WOW!!! your video & music make me hold spanner ;)

[@usurt9104]

Puede hacer uno volviendo a ensamblar gracias