Mercedes Electronic Module Flash Software Update

[@vladyarets3596]

Finally. For over a week I found a good one video which describe this process from the beginning to the end. Thanks a lot!

[@taher1973]

I wish I have seen this video months ago. One million Dollar Video. Thank you so much

[@mohammedalenezi156]

Honestly, brother, you are creative and deserve the best. Keep going, your channel is special. Others don't do that except in return. Thank you very much.

[@gabrielpimentel9316]

Friend, excellent video, to erase the Adblue and give more power, we also use what we would see, it is for a Euro 3 Mercedes Benz bus.

[@userValerii]

Красавчик продолжай в том же духе

[@mbdope]

Спасибо!)

[@markstar6572]

Thank you handy video.

[@julianfitpro]

Hello! Congrats for the video, it was much needed for someone to show this. For ecu med177 is there anything else to be saved aside from the coding? Even if you are available to help remotely i am willing to pay. Thanks!

[@oldbenzgaragebaku1771]

❤❤❤❤❤

[@ing.matejkerestur5958]

excellent video, can you make video about activating NTG5S2 maps ? or how to read or generate activation codes for those navigation maps? or how to activate amg cluster in w222, or how to show 330km max speed on cluster?

[@mbdope]

Thank you for comment. Navigation maps are activated by entering a code through the radio interface. Therefore, no special knowledge is required. The activation key is generated based on the map version and vehicle VIN number. Unfortunately, I won't be able to make a video about this - KZbin blocks videos containing piracy materials. Map data is paid software. As for the IC222 dashboard, a software version change will be required to activate the AMG. The program version is selected based on the current version of the HW of dashboard.

[@ing.matejkerestur5958]

@@mbdope on your video are showing few error, and the are still present after cleaning codes. How to solve this situation?

[@mbdope]

Some software updates add additional options that need to be coded. In the video, a W176 car with pedestrian safety sensors physically disabled. After the update, additional parameters appeared, including the parameters of those same sensors. Therefore, after turning off the sensors in another section and coding manually according to the configuration, all errors were gone.

[@M.Demirci81]

@@mbdope Great video 👍

[@dal_do_doma]

Здравствуйте как связаться с вами ? Интересует программа по обновлениям, у меня пишет, что нет связи с интернетом

[@davidpups5821]

🤝👍👍👍👍👍👍

[@gabrielpimentel9316]

I also have a problem with a c200, the ELV burned out, how can I program the ELV number?

[@bolivarveras473]

hi, big question, where i can find the WISFinder software?, any link to download?, thanks

[@mbdope]

SWFinder you can find on mhhauto.com

[@AsadGamer]

Thanks for sharing this great info. I got a question this prepare flash programming feature on monaco that isolates the modules does vediamo has something like that? And why there is 3 files to flash for this 1 module Have a nice day keep going

[@mbdope]

Thank you for comment! I didn’t found isolation in Vediamo same as in Monaco. Some of ECUs have 1 software, some up to 7. You can check how much softwares each ECU contains. It could make it by clicking on every ECU in Xentry scan for example. Or just check software details same as in video.

[@AsadGamer]

@@mbdope thank you again. But it's still safe to use vediamo, i have recently started learning it and i like it. Hope in one of the next videos you talk about VGS with vediamo. Keep it coming 💯💯

[@snipershot8049]

what does that software update do exactly ?

[@gritsgong]

Thanks for sharing, I subbed. Can DTS Monaco or Xentry flash/update the system from the yellow background to the red and silver background? w204 2012 c63 facelift.

[@mbdope]

Thank you for comment. If we are talking about head unit, it’s easier to flash using CD with new software. Please provide more information about what unit you want to update. And HW version of it

[@FarinaJr]

excelent ... thanks

[@mbdope]

Glad you liked it! Please comment what next video You want to see on channel

[@Verfil07]

Спасибо за информативное видео! Подскажите пожалуйста, то, что у вас отличается part number старого и нового софта это так и должно быть?

[@mbdope]

Спасибо за комментарий! У каждого софта свой номер. Подбирается по номеру HW (железа). Таким образом новый софт будет всегда с другим номером

[@Verfil07]

@@mbdope Понял, спасибо большое! Задам еще один возможно глупый вопрос: сейчас в машине установлен софт номер которого начинается на 292*, 212* и 166* (Command NTG 5.1 HU5s1). SW Finder мне выдает также 3 софта, но номера которых начинаются на 176* и два на 166*. Может ли быть такое, или я что-то не так делаю? Софт искал по HW блока.

[@mbdope]

По SW Finder-у искать софт на головное устройство - дело не благодарное. Там банально нет и 90% софтов на них. Но если он вам выдал софты 17-18 года по вашему HW, то можно использовать. Есть смысл 5.1 шить в эти года ради полного функционала карплей и андроид авто Во всех остальных случаях только долгий и нудный гуглёж даст нужный результат. Можете написать сюда номер вашего HW, я поищу что найдется. Если у вас три софта, то это аудио20 5.1, если четыре, то команд 5.1 Предпоследний софт в списке это diba - электронная инструкция по вашему авто. Ее оставляете той же версии (если ГУ не установлено с другого авто). В вашем случае, как я понял, это софт с номером 292

[@Verfil07]

@@mbdope Всего ксентри показывает три софта, учитывая руководство 292, при этом определяет она его как hu5s1, получается это ntg 5.1 или audio 20? И если вы говорите что 292 это руководство которое менять не нужно, почему тогда sw finder предлагает три файла для прошивки, и как понять какой не нужно загружать? Самая новая версия думаю не нужна, действительно хочу просто активировать карплей и андроид авто.

[@mbdope]

5.1 это только лишь версия (поколение) головных устройств. Они могут быть аудио20 или команд. Если у вас навигационные данные находятся на SD флешке - это аудио20. SW Finder это отличное подспорье в поиске софта по железу. Но не является даже близко похожим на XUS, где софт ищется прямо под ваш автомобиль. В SW Finder-е есть некоторая база данных, куда видимо попал набор софтов от 166. DiBa имеет свой номер на каждый кузов (например в случае с легковыми - на седан, универсал, купе и кабриолет он свой), а также на свою языковую группу. Таким образом в SWFinder может быть инструкция на 166 кузов на датском языке🤷🏻‍♂️ В любом случае, прошивка всеми софтами составит не более 40-50 минут. Попробуйте прошить этим софтом, расскажите. Если что-то будет не устраивать, можно снова прошить другим софтом👍🏻

[@elvismills3513]

Good work keep it up can you make a video on how to use Monaco

[@olione2876]

I am interested in downloading SWfinder, How can I get or buy it?

[@darkmoonomanstar6200]

Good

[@mbdope]

Thank you 👍🏻

[@gunescan1607]

Where can I download sw finder friend ? I couldn't find. everywhere is paid.

[@TwGN1]

In SW finder the last software number it’s correct one ? And can i do same way for update VGS ??

[@mbdope]

Thank you for the comment. Software version in the last column is written in format YYXXXX. Where is YY - the year of release, and XXXX - version of release. Usually you can find version numbers in diagnostic software or ECU sticker in format YY/XX.XX Actually all the same in ECUs. Except VGS. In some models it’s not enough to find last version by HW search. But also need to choose appropriate one, depending on engine model and drive type (4x4 or 2x4). My advice for updating the VGS module is to look for a car with the same engine and drive but with a newest software version. Don’t forget to save all codings before. Also good idea is to save whole car Xentry scan to have all original HW and SW versions in one place. And to plug in battery charger when you update VGS module.

[@AsadGamer]

If same hw number vgs have different software but same coding and both DAS teached will work fine or will have issues? Thanks in advance

[@statesandu7770]

hi;to do flashing with dts monaco 8.16 must be 13 volts ?

[@mbdope]

Hi, The lowest voltage while flashing is 12V I recommend 12.5 and higher up to 14V

[@FPSDuLe]

So we can not use openport for software updates? On W211 220cdi?

[@mbdope]

Not Chinese one. You can use original openport. Or VAS5054, or ScanMatik, or VCX or any other trusted variants

[@FPSDuLe]

@@mbdope VCX the one that you put in description?

[@mbdope]

Yes VCX SE for Mercedes I use one for commercial use. Hard usage. No issues.

[@FPSDuLe]

@@mbdope Ok thanks for info 🍻

[@寺田翔太郎]

Lately Monaco is losing open port connections a lot. Do you know of any solutions? I am using a legitimate open port. The voltage in the car is normal.

[@mbdope]

During open session? I think you need just to reinstall Monaco

[@寺田翔太郎]

@@mbdope Looks like the version was out of date! Thanks 👍

[@statesandu7770]

Hi ;i have an issue with software from cluster;can be copied software from new cluster to old cluster?

[@statesandu7770]

W253

[@mbdope]

Hi! It is difficult to find the right firmware for each analogue dashboard, because there is always only one SW for each HW. Digital dashboards can be updated, or firmware changed.

[@statesandu7770]

@@mbdope ok

[@statesandu7770]

HI;ECU ENGINE CR43 FROM MERCEDES X253 CAN BE FLASHED ?

[@mbdope]

Hi The same procedure. You just need to have right software to flash

[@statesandu7770]

hi;i have to copy software(not coding,not km ) from cluster w253 to another;do you know cabn be done with ecu exchange from dts monaco ?

[@SHUVALOV]

Где можно скачать SW Finder?

[@mbdope]

Напишите t.me/mbdope_eu скину

[@SHUVALOV]

Автор молодец,где скачать программу SW FInder?

[@mbdope]

Спасибо, скинул контакты

[@statesandu7770]

GOOD VIDEO;CAN YOU CONTINUE WITH ADDITIONAL CODING ?

[@mbdope]

Thank You. Sure! Please write what interests you? And I will definitely make a video about it.

[@statesandu7770]

@@mbdope it is possible to write a software in control unit ;it to be blocked; then rewrite the original software?

[@mbdope]

Sorry, I didn't quite understand about blocking. Anyway you can flash the software as many times as you like. Both newer software versions and older ones. Even if the software change has not been completed fully, you can initiate the firmware flash again.

[@statesandu7770]

@@mbdope can I write software from w253 year 2019 to w253 2016,on instrument cluster ?

[@mbdope]

Of course, but only if the HW numbers are the same.

[@snipershot8049]

whats the password for starfinder i got from mhh but its asking for password to open

[@mbdope]

Why i can know that?) I have no idea

[@snipershot8049]

@@mbdope would you be able to share the starfinder with us then ? to download

[@grisa878]

🤝👍👍👍

[@NghiaLe-mb3sh]

Good