I got the part from Roman after coming across this KZbin Video..very prompt shipping. I got Mercedes WIS step by step instructions on how to remove the manifold from another site. I called Roman a couple of times...He was always available and gave me good advice. Truly, you can expect a great part and great support from Roman. My wifes car now drives like a charm..saved me more than $1500 on this repair
@iansterski10 жыл бұрын
I ordered one and Roman shipped it the same day of the order. The part is top quality and there is no need for modifications to install it. It is just like the OEM except that it's made of aluminum instead of plastic. Thanks Roman.
@teesir229 жыл бұрын
Product is of high quality. Service from the team especially Roman is outstanding! Definitely highly recommended! Great doing business with you.
@deebrown47445 жыл бұрын
You are a GENIUS!!!!!!! Mercedes tried tell me I needed a new manifold
@steveratner10 жыл бұрын
Thanks Roman you saved me from buying a new and very expensive intake manifold. The part is well crafted and an exact fit. I also appreciate the quick ship! Thanks again. -Steve
@vberisa9 жыл бұрын
Hey Roman, its Jordan here from Toronto , CAN. I just received the part and will be putting it on thank you very much and appreciate the excellent service!
@mantislew5 жыл бұрын
How much was the part?
@Dnasty12 жыл бұрын
Nice vid. Can you change this without removing the entire manifold? Maybe take out the 2ndary air pump?
@markboettcher59377 жыл бұрын
Thank you very much European Motor Service! Parts received and worked perfectly! No more codes! And your being available for phone support is just incredible! (note for others - if you are also changing the crankcase ventilation valve the socket size is E8. Don't forget it is reverse thread!)
@europeanmotorservice2457 жыл бұрын
Thank you so much for your positive feedback. Were glad the part and my instructions helped you solve your problem!
@swift4311 Жыл бұрын
What was the code?
@conormcgregor54603 жыл бұрын
There is another one of these intake flaps made by another company and it is made out of aluminum as well but the piece has 30° less angle on that actuator rod area. I heard it's a better fix.
@rommel251710 жыл бұрын
This product is really very good and well made. Thank you Mr Roman!!!!!
@williamnyamuswa16068 жыл бұрын
bought the part here for my 2007 GL450, it works well and saved me replacing the whole Manifold
@marcsmith38819 жыл бұрын
This is a much better design than the pieces I see on Ebay. I recently pulled the intake on a 2006 R350 and the I had to modify the rods and remove the balls on the ends. It made me nervous because there is far too many plastic pieces that can break, This design with the receiver cups is perfect. I charge $400 to do this repair on my customers cars. That is a beautiful piece. I would buy a few from you.
@jdantigua1999 Жыл бұрын
Intake carbon buildup is the original cause. Always clean the carbon from the intake as well.
@marcsmith3881 Жыл бұрын
@@jdantigua1999 I am aware. I have been servicing Mercedes Benz vehicles for over 20 years and spent several years at 2 different MB dealers. I have replaced dozens of these.
@javelinwolfsburg35957 жыл бұрын
It's quite ridiculous that Mercedes engineers such great machines but utilizes some of the most flimsy materials. I bought a 07 c230. Absolute dream. Took it in to get a repair and found the main flip was broken just as show in this video. The entire manifold was replaced costing me over $1300. Quite a bit for a 20 yr old college student. It's fixed now and probably going to last some years, but seriously wished I had known this part so it could've saved me a ton.
@europeanmotorservice2456 жыл бұрын
This is incorrect. The only joint that comes in contact with plastic in my piece is made from bronze, which is a strong, yet soft metal. This eliminates any wear on the plastic socket over time. Any other contact the actuator flap sees with is metal, which will not wear or break from my part. Of course, in some rare cases, plastic is used instead of metal to prevent wear of other moving parts, but in this case, metal is the way to go.
@Alienman516 жыл бұрын
Blame them for teaming up with shitty as Chrysler.
@BobJones-ib4xh6 жыл бұрын
I believe that may be when the quality went down hill for MB. American car companies are all about cutting corners and I am afraid MB may have adopted that strategy after the companies merged.
@kw75705 жыл бұрын
European Motor Service - Bravo, very nice work by you. I just purchased a 2010 C300 with 60K miles. This IS on my list to-do BEFORE it's a problem. My BMW e39 had DISA Valve which was an issue to avoid. Roman, I live on Long Island and do 99% of my own wrenching, but I envision a day trip over to you for this job, along with the Crankcase Vent Valve. You know your stuff indeed. See you in a few months, cheers.
@jdantigua1999 Жыл бұрын
Intake carbon buildup as well as heat is the original cause. Always clean the carbon from the intake as well.
@jdantigua1999 Жыл бұрын
Intake carbon buildup is the original cause. Always clean the carbon from the intake as well.
@kito1san3 жыл бұрын
How about the plastic part (swirl flaps) inside the metal intake? Those are surely gummed up from the oil fume and hence why the triangle part broke in the first place due to stress and friction from the gummed up part inside the intake. The triangle part you are making does not fix this, it just ignore the intake being gummed up. Wish Mercedes focus on eliminating the problem (gummed up plastic swirl parts). If you trace where the oil fume from where it came from, you will find it came from the throttle body/ butterfly, then the plastic elbow, then a port with a plastic tube, and yes.. from the pcv cover and the oil drip pan, to the ENGINE crankcase (the source of all the oil). Yes, this is the source of the problem. These parts has failed to screen out enough oil. If you are fixing this problem with the intake, you will find oil streaks/gummy all along this path. This needs to be clean out and have the pvc cover/ oil drip pan replace. The other resolution is install an oil catch can to further filter out the oil fume, unless you there is a better idea.
@thesupernuge8 жыл бұрын
That's great news, According to those who replaced it just the actuator was broken and I can confirm that visually. Any suggestions on buyers or places to sell it?
@ankygf2 жыл бұрын
Excelente video de cómo comprobar las válvulas 👌🏻💪🏻
@hashmat47589 жыл бұрын
HI Everyone !!! My name is Hash, I am the owner of Concord Auto Body & Paint in Concord California. I owned a 2006 Mercedes Benz E350, the actuator rod was broken, I called the dealer they told me it would cost me around $1300.00 to replace the entire Intake Manifold. so I decided search it in KZbin, and I found this video and watched it, then I made the call to this Mr Roman, He was very helpful, he asked for the Make and Model, he said no problem, I had one request from him, I need the part ASAP, he reply no problem let go to the US Post office find out what is the cost of it then I will call you, He did call with the price of shipping NO extra charges for him, just the shipping charges only, so I give him my card, he charged me exactly what he told me. I got the part the next day, it was PREFECT fit. I will recommend this nice gentleman to everyone. BEST Service and Great Part. Hash
@FMSFMS-q4z5 жыл бұрын
Thx for your good video.
@backwoodburner70794 жыл бұрын
What's his number I have a r350 that needs the same part intake runner stuck open
@LIVEFREEORDIEUSA8 жыл бұрын
YOU ARE GENIUS..HOW ABOUT THE TWO VACUUM ON THE RIGHT AND ON THE LEFT DO THOSE PARTS GO BAD?
@ShaneHolly4 жыл бұрын
Does this work for 2007 R350 Also can it be replaced with intake still on car?
@JuJullauky3 жыл бұрын
Mr Roman, this video is really helpful. Does this work for 2009 E350 Coupe?
@jeanalexandre30079 жыл бұрын
Product is of high quality. Service from the Roman is outstanding! Definitely highly recommended! I was able to quickly contact him for advise and support. He even teach me the easiest way to remove the intake manifold on my C280 mercedes benz 4 matic. Great doing business with you.
@enzocree5155 жыл бұрын
I definitely need this part I have a 2011 R350 Bluetec, my check engine light read P2004 flap stick open.
@mikeashchian4 жыл бұрын
Hi! Working on R350 with same code here. Did you replace that part and did it fix your engine problem?
@elneneeserio3 жыл бұрын
Good job
@2CREATthief4 жыл бұрын
but what about the inside? are there no plastics inside the manifold itself which may broke too?
@VWhiteTiger9 жыл бұрын
Very helpful video, thank you for making it. But what about two other valves (you were checking them after you checked replaced part) ? Are they also made from plastic? Do they need replacement?
@europeanmotorservice2459 жыл бұрын
The other two valves do not need replacement unless you are sure they are damaged, which is unlikely. But, you cannot replace them due to the fact that they run throughout the entire intake as one piece, so if it is broken you need to buy a whole new intake. And yes, they are plastic but are not as prone to breaking as the actuator rod, so there is no need to worry.
@darijaba Жыл бұрын
Product is of high quality.
@franknight1009 жыл бұрын
I bought the whole intake manifold cause the dealer told me was broken I don't know if I should replace it or just repair my old one where your job I Iloilo love for u to be the one working on my car
@tc63tec655 жыл бұрын
Hi Roman, your video was very helpfull. Thanks for shaing.
@tkoshauno7 жыл бұрын
great page man and great part replacement. you seem to know your stuff so i was curious on your opinion to a plenum removal from the supercharger of a c320. im told its easily removed giving less restriction to the super charger & a nicer sound? keep this page going 👌
@c.h.r.i.s22532 жыл бұрын
When I look at mine it really looks like I can do this without taking out the manifold. 2008’S550
@johnwet57986 жыл бұрын
This CNC part is look very great. Why MB do this in plastic part, I don't understand. Its break very easily.
@tvs34979 жыл бұрын
I have '06 C230 & my left side valve is broken, the round black plastic piece is gone and engine has bad vacuum leak, according to my A-1 mechanic. I looked today, it is a big hole there you can stick your finger inside. I don't want to pay $900 for whole new intake manifold replacement job. But it looks like I have no choice. Got any ideas? Thanks for your video, really nice job.
@europeanmotorservice2459 жыл бұрын
Tim Vger From what you said, the front tune ups seem to be broken which also means that the plastic that runs throughout the intake as one solid piece is broken. Unfortunately, there aren't any replacement parts available for that yet, so if that plastic breaks, you have to buy a new intake manifold. 95% of Mercedes intakes break in the actuator rod, which is the part that I have a replacement part to, but that other 5% break in that large plastic. And as I said before, if that is the case, it is inevitable to replace the entire intake.
@rtgug30844 жыл бұрын
RECALL: Why has a lawsuit not been done to get this redefined as a manufacturer recall, and mercedes fix this design flaw, just like any other recall?
@John-hp5yo7 жыл бұрын
perfect video thank you
@mahmoodtahoon13354 жыл бұрын
Guys, any thoughts about what would be the condition of the flaps themselves from inside the manifold? Many mechanics told me that the flaps might be damaged from inside or even molten or stuck from the heat... Could that be true? Another question is, what about all those plastic rods, aren't they also too weak to keep operating for such long periods without breaking?
@jdantigua1999 Жыл бұрын
Intake carbon buildup as well as heat is the original cause. Always clean the carbon from the intake as well.
@chadcox68773 жыл бұрын
I need to order this part please.🙏🏻🙏🏻🙏🏻😀
@jooppoojk23563 жыл бұрын
Will it suit the 2006 w211 e280 with e272 engine?
@mantislew5 жыл бұрын
very good idea! how much is the part?
@tonycolvin74565 жыл бұрын
Ok in theory can't you just replace the plastic piece on the old intake? If the failure is external what would fail inside?
@thesupernuge8 жыл бұрын
Excellent video! Question is the unit worth anything to resell if I or someone replaces the actuator? Or is it not worth anything? Any help is appreciated!!!
@europeanmotorservice2458 жыл бұрын
+Todd Nugent Of course it is! As long as everything else is in working condition and the intake manifold works just as it should.
@MissionaryForMexico3 ай бұрын
What are the procedures to modify improve intake manifold?
@phongtang92252 жыл бұрын
How much it cost?
@HassaniToufik-c8y Жыл бұрын
good morning i need the part , can you tell me the price of it and shipping
@Trevonious952 жыл бұрын
Can I buy one of the manifolds with the upgrade?
@hosseinmreer54123 жыл бұрын
Good, I want the same piece, how can I get it? W221
@kelvinwhite81962 жыл бұрын
Show how its done with the engine IN the car
@NoviNacin4 жыл бұрын
Hi there. Do you still make and sell this part? I need it!! Anyone know where I can get it?! Please help thanks!
@Certified_Freak02 жыл бұрын
Hello Dear. Hope you are fine. I need your help as my W221 2007 s350 showing mentioned error : 0522 Diagnosis of tumble flap Intake manifold: Open circuit of sensor lines / Tumble flap shafts stick in the nonactuated position. (P2006).............. Can you please guide me how to get it fixed....
@jellevr19836 жыл бұрын
Hello, what's the price of the part?
@europeanmotorservice2455 жыл бұрын
The part is $160, 2 gaskets and shipping included in that price. If you are interested in one, you can contact me at rzjawin@hotmail.com, or call my shop during business hours at (732) 393-0444
@tataydexplorer1125 Жыл бұрын
sir i have a problem on my c280 2006 model about P2006 P0071 and P2768. do you have any shop here in Houston Texas? Thanks for the reply..
@johnthodiyil10917 жыл бұрын
Can a car have OBD code P2004 for some time and chenge to P2006 --- open for sometime and then closed
@Mauriciovargasjr7 жыл бұрын
John Thodiyil I'm having the same problem
@michaelwilliams2035 Жыл бұрын
What’s the name of this part and where do I get it from?
@2Mont1064 жыл бұрын
Hey Roman, I have a question sir, regarding your video, intake manifold, and its actuator. I'm experiencing all those issues relative to the topic of your discussion, however, i started my car and attempted to further diagnose my issue, I was able to carefully get in between the hoses and wiring with my needle nose pliers to manipulate the function of the external actuator but nothing happened. The car didn't sputter nor shut off and the idle stayed the same. Is this normal?????
@chanelprincess60617 жыл бұрын
Hello I have an P0025 with. Variable Valve timing Actuator needs to be replaced? Is this on the intake manifold? Thank you
@monirobaid58094 жыл бұрын
hi European motor service, is there a way to inspect this part with out removing the intake manifold? also I want to know if my car has the actuator thing because I took a look at it and don't see that kind of setup I have a 2003 Mercedes benz e500
@JuJullauky3 жыл бұрын
Hi Roman, can I order the 2 blue pliers just shown in this video? Does these fits 2009 E350 Coupe?
@tomquaglino931110 жыл бұрын
I have a 2006 W211 e350 4matic. CE light on, Fault codes p2006, P2189, p2187 I think it's the actuator rad broken. Can you access the actuator rod without removing the manifold. as you have done for your demonstration. How much time would you allow for this job. thanks, T
@europeanmotorservice2459 жыл бұрын
You cannot access the actuator rod without removing the manifold, and it takes 3-4 hours to remove the manifold. I will make a video soon instructing viewers on how to do so.
@esamtaleb29193 жыл бұрын
What is the main problem for the car I don’t change the intake
@mattwatson72254 жыл бұрын
Hi Is this the same part for a 2016 Vito 2.1 lt motor? I have the error code P200a - MB have said its the flap motor Would this part you make fit that model? Thanks in advance
@johngerberjr.35713 жыл бұрын
How can I tell if the part is broken?
@rusty3586 жыл бұрын
Can this be done without removing the manifold?
@europeanmotorservice2456 жыл бұрын
No, the manifold has to be removed to gain access to replace this part. I have another video with step by step instructions on how to remove intake manifolds from these Mercedes Benzs with this intake.
@maurice0822 Жыл бұрын
Are you still selling this rod?
@michaelbisk9311 Жыл бұрын
Where are you located?
@uzzle215 жыл бұрын
i need to purchase the part im getting a p2005 code on an 2006 mercedes e350
@Beastie_Boy338 ай бұрын
how much for the part?
@njoeandjen2 жыл бұрын
i changed the broken lever and gaskets on a 2007 C280 but keep getting a p0012 or jumps to a p2004 code how can i tell if the vacuum is opening the flapper valve i rev engine don't see any movement someone said just moves under load ??? is that correct or i will get a random misfire car has me confused and frustrated!
@GhostI9677 жыл бұрын
I have this code 0521 intake manifold short circuit to ground of sensor lines tumble flap shafts stick in the actuated position (P2004) what could it be ? is it some kind of electric thing like a sensor ? or is it that broken flap ? and should I replace the whole Intake manifold ?
@damianzjawin56307 жыл бұрын
If you have any questions regarding this please feel free to call the shop at 732-393-0444 and speak to me and I will be able to help you in the best way I can.
@BobJones-ib4xh6 жыл бұрын
Grounding cable come lose?
@GermanBlueMax5 жыл бұрын
@@BobJones-ib4xh I have the same code on my 2009 C350. I checked the plastic flapper part and the plastic that has the 2 "nets" is in fact broken. I will need to replace it.
@rufusworkman48123 жыл бұрын
How can I buy the actuator rod today?
@ShaneHolly4 жыл бұрын
I need this part for my 2007 R350. How can I get it and will it fit.
@europeanmotorservice2454 жыл бұрын
Hi Shane, this part will fit on your car. If you are interested in buying one, you can find my contact information in the description of the video. You can give me a call during business hours or shoot me an email.
@anthonypenemodikwa47614 жыл бұрын
@@europeanmotorservice245 how can I get or order the part
@nachogalvezantunez19156 жыл бұрын
Hi European Motor Service, could you send the piece to Mexico? Do you sell it through Amazon or some market place? Thanks
@europeanmotorservice2456 жыл бұрын
Send me an email at zjawin.r@gmail.com and we will talk about shipping costs.
@nachogalvezantunez19156 жыл бұрын
European Motor Service Very Thanks, will do
@hassanfouani48536 жыл бұрын
i have c240 model 2002 /the Engine shiver in N and P and i have oil evaporation /1000miles*1 litre oil can u help me to find the problem plZ
@elitamwenda30795 жыл бұрын
I urgently need this part . Do you have some available and how do I get in touch with you?
@europeanmotorservice2455 жыл бұрын
Yes, I do. You can contact me at rzjawin@hotmail.com, or you can call my shop during business hours at (732) 393-0444 to make an order.
@mikeovanes Жыл бұрын
Where can i get the part?
@gustavogalvez48455 жыл бұрын
Hi Roman will it fit in a 2006 ML 350 suv?
@europeanmotorservice2455 жыл бұрын
Yes it will!
@Daneilli1331339 жыл бұрын
Is it hard to remove the intake manifold? Could you show us?
@europeanmotorservice2459 жыл бұрын
For me, no. But it depends on your experience but in the near future, I will make a video showing you step-by step on how to remove the intake manifold.
@cjohnson56758 жыл бұрын
does the check engine light always come on when this part break i got a s550 07 that seem like the gas pedal is kind of stiff it stalls and just over all runs sluggish
@europeanmotorservice2457 жыл бұрын
yes that is because original plastic actuator has broken off. If you are interested in purchasing my part, please contact me.
@haigkancashian84426 жыл бұрын
I have a 2007 E320 bluetec, with the same problem. Is there anyway I can reach you by phone or email to discuss how to get this part from you? I would certainly appreciate it.
@europeanmotorservice2456 жыл бұрын
Haig Kancashian you can email me and then have you call and i will explain to you everything.
@europeanmotorservice2456 жыл бұрын
Haig Kancashian zjawin.r@gmail.com
@anthonypenemodikwa47614 жыл бұрын
How can I order the part
@mikeovanes7 жыл бұрын
My Benz dealer say Actuator flap is stuck... or broken .. Is there a way to spray some silicone lube on it? thanks... I hat to get all new manifold for a stuck part..
@europeanmotorservice2457 жыл бұрын
Most likely your issue could have been solved using my part. It is a very rare situation for the flap to actually be "stuck." 99% of the time it is the actuator rod (the piece shown in the video) that is broken and needs to be replaced. The only way to test it is to actually pull out the manifold and inspect the damages.
@jr5mob7 жыл бұрын
Mike Ovanes was ur car bogging out and not getting full throttle?
@jdantigua1999 Жыл бұрын
Intake carbon buildup as well as heat is the original cause. Always clean the carbon from the intake as well.
@tonywilliams94419 жыл бұрын
I have MB 2008 GL550 and a code P2005 can up, do i need to replace the intake manifold
@europeanmotorservice2459 жыл бұрын
Tony Williams Thank you for watching my video. No,you don't have to replace the whole intake. You can just replace intake rod with my part.Most of the time it is the part that brakes on those intakes.By replacing just that piece you save yourself a lot of money.Because complete intake is over $1000.00 plus labor charge. You can email me for more info to my e-mail address rzjawin@hotmail.com
@HassaniToufik-c8y Жыл бұрын
how i can order it please
@MinhNguyen-nq2ib6 жыл бұрын
Can you install that part with out take out the intake from engine ?
@europeanmotorservice2456 жыл бұрын
Minh Nguyen unfortunately, the intake has to be removed in order to clean the intake and replace the gaskets to finish the job!
@europeanmotorservice2456 жыл бұрын
Unfortunately, you can not get access to the actuator rod without removing the intake, so you have to remove the intake.
@kienmach97597 жыл бұрын
How much is this actuator rod???
@europeanmotorservice2457 жыл бұрын
It is $150, gaskets and shipping included.
@brandongarciabrandongarcia7733 Жыл бұрын
❤❤❤❤❤❤❤
@عنودالعنود-ص2ف2 жыл бұрын
اريد هذه القطعه
@tambaymuna8 жыл бұрын
Hi will this fit a 2007 GL450?
@europeanmotorservice2458 жыл бұрын
+Emil Balandan Yes, it would fit that model.
@franknight1009 жыл бұрын
Where is ur shop
@europeanmotorservice2458 жыл бұрын
+FRANKNIGHTS SAFE South Plainfield, NJ, 07082
@akvilonnord56189 жыл бұрын
How I can to bay this part?
@europeanmotorservice2459 жыл бұрын
Email me at rzjawin@hotmail.com regarding the part and I will respond with all the details. Thanks.
@zxtenn7 жыл бұрын
Superior to stock garbage but the other ones [round] break also
@jinzoboy8 жыл бұрын
Anyone else notice there is a Maybach 62 in the back!
@majedalghamdi52214 жыл бұрын
My car 2006 s350
@bricegray8472 Жыл бұрын
Car wont pass smog if u do this
@AngelMunoz-xc8cb9 жыл бұрын
shit just broke on my fucking car $1100 to repair.
@RR-bt5xv5 жыл бұрын
Over priced part found several on ebay less expensive
@gawdat38598 жыл бұрын
0:55 is he going to kill me? :(
@europeanmotorservice2458 жыл бұрын
+Gawdat No, I will not kill you, but you did make me laugh.
@gilbertojim12635 жыл бұрын
That's a very bad engineering that's embarrassment 4 Mercedes
@europeanmotorservice2455 жыл бұрын
Well, there will always be flaws with cars, and it is our job to find solutions to problems like these.
@jdantigua1999 Жыл бұрын
Intake carbon buildup as well as heat is the original cause. Always clean the carbon from the intake as well.
@terjegronlie1181 Жыл бұрын
Does this help to fix the error P2013 irmc solenoid?
@jamesbryan88738 жыл бұрын
How can I buy that part
@John-hp5yo7 жыл бұрын
his website and phone number listed in the "more tab" under the video itself.