Mercedes Truck Accident Cabin ' Chassis Repairing And Restoration Complete Video Truck World 1 ||

  Рет қаралды 7,775,549

Truck World 1

Truck World 1

Жыл бұрын

Mercedes Truck Accident Cabin ' Chassis Repairing And Restoration Complete Video Truck World 1 ||
• Mercedes Truck Acciden...

Пікірлер: 3 300
@Garage48-Andrei
@Garage48-Andrei Жыл бұрын
🔥🔥🔥супер!!! Я поражен упорству и настойчивости и у и умениям мастеров!!! А резаком режет, как лазером!!! Нет слов. 👍👍👍 Мастерам.
@ebc1f7
@ebc1f7 Жыл бұрын
Damn gents. This is the most kitted out business I’ve seen in these videos. Air tools, forklift and hiab. No excessive use of hammers or needlessly tossing stuff on the ground. A work bench. And no one under the age of 16. Nice job guys. I was impressed on how u got the frame back straight.
@sjefhendrickx2257
@sjefhendrickx2257 Жыл бұрын
And sandals……
@buttertoast8039
@buttertoast8039 Жыл бұрын
@@sjefhendrickx2257 haha just wanted to reply and say the same
@spannaspinna
@spannaspinna Жыл бұрын
It’s a union paddock 😂
@e30325ikiller
@e30325ikiller Жыл бұрын
@@spannaspinna in one scene one guy has security boots but i d also waer adilettes
@beefchicken
@beefchicken Жыл бұрын
The chucking stuff on the ground is what always gets me about many of these videos. Especially in the manufacturing videos where they toss each piece on the ground at each step, then they have to go around and collect all the pieces to bring to the next guy that does the same thing.
@Ricky-zj6sy
@Ricky-zj6sy Жыл бұрын
Excellent work guys, I have the luxury of living in Ireland where we can buy whatever we want including all the genuine spare parts from Germany to repair these things. But the way you straightened and reinforced the chassis rails is a credit to you all and the way you cut those rails with the torch was like a CNC plasma cutter. Utter respect!! Just hope you put new tyres on it before it drove away?
@charlescastillo8870
@charlescastillo8870 Жыл бұрын
Even without the benefit of new tech these craftsman put out work at the same level if not better, we've come to depend on all the modern equipment and have forgotten the basics, hammer and dolly, cutting torch and a tram gauge.
@timamyett9679
@timamyett9679 Жыл бұрын
yes they did look at the last picture.
@johnye4433
@johnye4433 Жыл бұрын
In the west, people are fixed the same way, so we are still a fixed society
@blackfoot5527
@blackfoot5527 Жыл бұрын
unbelievable only hands labor no machinery nothing my hat is off to you
@WhiskeyGulf71
@WhiskeyGulf71 11 ай бұрын
It would seem these guys also have access to genuine Mercedes parts, those trim parts all looked like OEM to me
@slavic666
@slavic666 Жыл бұрын
Респект мужикам, адская работа но выполненная достойно. Очень порадовал момент с усилением рамы.
@ofarito
@ofarito Жыл бұрын
I am an engineer borned and raised in Mexico, and I know the kind of things that we have to do in the third world in countries, due to the lack of budget, tools and specialy imported spare parts. I did some prety amazing jobs myself, But the level that these guys reach in solving problems, the quality of their job and the artwork is just out of this world. And you have to add the total lack of safety and other enviromental conditions under wich they have to work. I just have to say FREAKING AMAZING.
@voindorog3328
@voindorog3328 Жыл бұрын
Если есть голова на плечах то можно горы свернуть. Русская поговорка. Да работа волшебников, не реально труд на высшем уровне. Привет из России, мир твоему дому.
@coz_d
@coz_d Жыл бұрын
Yeah, we got ourselves in Romania, cars involved into fender bender accident on the motorways that were split in two. I mean split in two, the original pieces that were glued together. Nope, thanks, YOLO is for others. kzbin.info/www/bejne/rXnXmnd5oJijrZI
@SalimSalim-jg3hh
@SalimSalim-jg3hh Жыл бұрын
I have Nissan pick up 2015 made in Mexico was the worst one car I drive and you are talking about quality
@linzierogers5024
@linzierogers5024 Жыл бұрын
Point well taken. People survive according to their means of survival. If it helps them survive then grading on western standards is moot.
@ofarito
@ofarito Жыл бұрын
@@SalimSalim-jg3hh And I know a Salim that was a Terrorist, Do do not apply a specific case as general behavior Please do not expect to measure the quality delivered by a country with the quality of an individual truck. That is called exeptions
@enriquegonzalez760
@enriquegonzalez760 Жыл бұрын
You have inspired me. My father died last year, and i have not been able to get back to work the way i should. I think of him all the time. You have inspired me to get back to work, Thank you! A person's heart and mind can be broken worse than a body part or the worst vehicle accident.
@user-wj1iy2by8s
@user-wj1iy2by8s 7 ай бұрын
У восхищён, как они на коленке восстанавливают машины лучше, чем некоторые заводы на современном оборудовании выпускают новые. Здоровья и благополучия этим работягам!!!
@donnie3924
@donnie3924 Жыл бұрын
25 years Ironwork experience, I knew where the restoration had to take place. I was impressed with the tools that were used, by many accounts would have been difficult at best. Craftsmanship was first-rate, disregarding wearing sandals OSHA no-no. Other than obvious items, never wore masks, no paint booth, no rivet gun, this is an amazing video of skill over lack of tools!
@KWCMNY
@KWCMNY Жыл бұрын
Imagine that they are still alive!!!
@user-bl5ry7cs6n
@user-bl5ry7cs6n 9 ай бұрын
Просто это удивител ьное, потрясающее, взаимопонимание, действие, без, дай ту х...ню, возьми эту, а товарищь с 25 летним стажем, диву даётся, а что тут, дикого, то? резак, кувалда, и сообр ажалка!, куда ударить, да где погреть, даже ни лебёдок, ни ,,блоков грузов" это же не кабину вытягивать, повезло ей сдвинуло аккуратно, а может, так задумано, создателями!!!??? и главное ещё сама едет!!! И все довольны!@, а у нас хапуги , до гола бы ,,раздели", и делали годами,, .
@user-mu3jh2tq4p
@user-mu3jh2tq4p Жыл бұрын
Парни просто красавцы, сколько смотрю разные видео, пакистанцы, индусы молодцы с колен технику подымают у нас сразу в разбор а они всё круто делают даже рамы в порядок приводят, дай бог им здоровья и удачи молодцы с большой буквы 👍🙏👳‍♂️👍
@user-eg9ez3gs7z
@user-eg9ez3gs7z Жыл бұрын
А смысл этот тотал делать? Ремонт будет стоить просто космических денег.
@endurocrosser8834
@endurocrosser8834 Жыл бұрын
@@user-eg9ez3gs7z Nope.Work hours are really cheap.Only the new parts are the costly
@6tonn
@6tonn Жыл бұрын
У нас нормочас дорогой, поэтому нерентабельно восстанавливать. А у них копейки.
@me_nulis
@me_nulis Жыл бұрын
Они из-за такого дешёвого нормочаса (во всем) такие дрова поэтому и восстанавливают, потому что что-то на замену взять - нереально. Молодцы конечно
@dastantulenov4915
@dastantulenov4915 Жыл бұрын
А это безопасно на таком ездить?
@user-rz9nd2bl7p
@user-rz9nd2bl7p Жыл бұрын
А Я ХОЧУ СКАЗАТЬ СПАСИБО ОПЕРАТОРУ ТАК КАЧЕСТВЕННО СНИМАЕТ И ПОКАЗЫВАЕТ САМЫЕ ИНТЕРЕСНЫЕ МОМЕНТЫ РЕМОНТА !
@vlasovms
@vlasovms Жыл бұрын
особенно вставку пластиковых деталей последние 10 минут видео 😁
@vasnetsch1576
@vasnetsch1576 Жыл бұрын
колхоз имени махмедахмеда .меня всегда удивляло куда деваются со шроттов фрг грузовики..
@user-ph7dz6yo1y
@user-ph7dz6yo1y Жыл бұрын
4799
@T.T.N.
@T.T.N. Жыл бұрын
@@vasnetsch1576 колхоз у тебя дома! А эти мужики делают невозможное. Большое им уважение и низкий поклон!!!
@user-oc3jm3bh9e
@user-oc3jm3bh9e Жыл бұрын
@@T.T.N. Что невозможного они сделали? Как и сколько это будет работать?
@user-xp5vu2sx2q
@user-xp5vu2sx2q Жыл бұрын
Ребята вы молодцы. Добра и мира Вам. Привет из России.
@christophmeirich5928
@christophmeirich5928 Жыл бұрын
Liebe Grüße nach Russland... Christoph 👋👋👋👋👋
@user-kb9ck7sy8x
@user-kb9ck7sy8x Жыл бұрын
У меня нет слов. Это люди которые умеют находить любые выходы. Всем вам парни удачи, молодцы. Токих мостеров я некогда не видел. Браво.
@sokolov7093
@sokolov7093 Жыл бұрын
Вы видимо никода небыли в кузовном сервисе. И причем у меня например не было пневмоинструмента, все ручками, а работы мы делали такие же
@GOTboost-tl3qi
@GOTboost-tl3qi Жыл бұрын
I dont think the average person grasps how impressive that frame rail liner they made it. Im blown away by the skill with the tools they have. Bonus points for using one of those wrist breaking all aluminum drills like my dad used to have from the 50s.
@skepticalobserver7484
@skepticalobserver7484 Жыл бұрын
Yes, yes and yes.
@dougobrien2840
@dougobrien2840 Жыл бұрын
Your not wrong, i was thrown a few times by one of those big ass drills in the 1980s. When they grab your going for a ride.
@simkesimic5807
@simkesimic5807 Жыл бұрын
@@skepticalobserver7484 plq111qqqqqqq
@dominikaugust8296
@dominikaugust8296 Жыл бұрын
In Germany WE Work with old Drills too. IT's hard to find powerfull Drill, with Low Speed and maximal Torque.
@andrew_koala2974
@andrew_koala2974 Жыл бұрын
When you use the words "I don't think' - these words describe YOU Secondly - when you don't think - how is it possible to arrive at a conclusion? EXPLAIN THAT To arrive at any conclusion REQUIRES THINKING - which you are unable to do - by your own admission. That means you are a clown. Time to start thinking and reading to educate yourself.
@dkpeldkpel
@dkpeldkpel Жыл бұрын
За то, что укрепили гнутую раму дополнительным слоем металла, однозначно лайк! Горе ремонтники оставили бы как есть, и потом думай а не сломается ли всё это в один момент.
@user-fd3ic5zu9c
@user-fd3ic5zu9c Жыл бұрын
И облезет морда после первой мойки
@ashrafmahmoud8829
@ashrafmahmoud8829 Жыл бұрын
This is very true because in case of injury they do not find anyone to stand by them
@Vperedsmotryashii
@Vperedsmotryashii Жыл бұрын
@@user-fd3ic5zu9c с чего облезет? Норм обезжирили, загрунтовали. подскажите, если не заметил чего.
@user-mq9eg9pc4i
@user-mq9eg9pc4i Жыл бұрын
Радиаторы наверно тоже родные отшаманили. Не удивлюсь.
@9v999
@9v999 Жыл бұрын
@@user-mq9eg9pc4i когда разбирали побитую голову. Тоже переживал. Как трудно будет восстановить 😁😁😁
@user-dv8nu1is5e
@user-dv8nu1is5e Жыл бұрын
Кто бы мог подумать, что можно вот так под открытым небом и на " коленке" сделать такой нелегкий ремонт! Ребята, однозначно, большие мастера!
@maksimstepakin5498
@maksimstepakin5498 Жыл бұрын
в основном на кортах все делают, у нас в этой позе только семки лузгать да сиги стрелять могут
@ProS-qo6gf
@ProS-qo6gf Жыл бұрын
На сколько качественно и безопасно под вопросом
@user-eo1os9qw5e
@user-eo1os9qw5e Жыл бұрын
@@ProS-qo6gf Конечно безопасно, ты усиление рамы видел какое, теперь стены пробивать можно😀
@Toliteron
@Toliteron Жыл бұрын
А потом эти сложенные гармошкой рамы, сложатся со временем, сами по себе Сварка это временный "ремонт" с повреждением металла А продадут по цене "не бит, не крашен"
@trevorgregory
@trevorgregory Жыл бұрын
9s
@andrei1969fly
@andrei1969fly Жыл бұрын
Смотрел и думал, что будут делать с рамой после рихтовки кувалдой и автогеном. Усиление рамы изнутри вкладышами это нечто!!! Надо взять на заметку. Молодцы мужики, что можно подчинили, а что можно тупо заказать, заказали, типа кассету с радиатором и кулером, вентилятор, декоративный пластик на кабину
@user-yp9pz2sn9v
@user-yp9pz2sn9v Жыл бұрын
Я сомневаюсь, что ты бы купил такую машину.
@tyndra91
@tyndra91 Жыл бұрын
@@user-yp9pz2sn9v У нас распил берут)
@chloehennessey6813
@chloehennessey6813 Жыл бұрын
10:20 that man’s a walking CNC plasma cutter. Did you see those straight lines he did? That takes some serious skill.
@UrAshWhole
@UrAshWhole Жыл бұрын
Thats oxy acetylene torche.
@jmgm4623
@jmgm4623 Жыл бұрын
I just thought the same
@buttertoast8039
@buttertoast8039 Жыл бұрын
@@UrAshWhole well duh captain obvious.. if you read properly what she said, you might understand!
@UrAshWhole
@UrAshWhole Жыл бұрын
@@buttertoast8039 I still stand correctly.
@spannaspinna
@spannaspinna Жыл бұрын
Yup he’s handy at free hand
@user-fd5wk8dy7q
@user-fd5wk8dy7q Жыл бұрын
я даже не знаю, что этим чувакам сказать! просто БРАВО !!!
@user-ho9cr4xm9c
@user-ho9cr4xm9c Жыл бұрын
Мастера на высшем уровне! Работают в таких условиях и такое качество ремонта 👍
@user-qc4up5bz3g
@user-qc4up5bz3g Жыл бұрын
Потом удивляются что у Пакистана есть атомная бомба....
@sokolov7093
@sokolov7093 Жыл бұрын
какое качество, покрасить кабину не подготовив как следует?
@user-qk9wz8ww7t
@user-qk9wz8ww7t Жыл бұрын
@@user-qc4up5bz3g Это не индусы были разве? не знал.....
@KLEVEREDi0T
@KLEVEREDi0T Жыл бұрын
@@user-qk9wz8ww7t These are Pakistanis 🇵🇰
@user-wq8qb5uw7t
@user-wq8qb5uw7t 10 ай бұрын
У нас так с завода не делают
@tylerbarrett6652
@tylerbarrett6652 Жыл бұрын
It was absolutely amazing to see you guys fix this frame and reinforce it. I didn't think it could be done.... but you did it!
@user-kg5un9nl5q
@user-kg5un9nl5q Жыл бұрын
Отлично, голыми руками такой ремонт сделали супер.
@mezahirsliyev433
@mezahirsliyev433 Жыл бұрын
Согласен колега. А в наших краях одни леняти и мошенники. Таких бы мастеров в наши края
@asybyrov37
@asybyrov37 Жыл бұрын
@@mezahirsliyev433 это в каких ваших? Года два назад видел на ютубе, как реставрировали в Новосибирске, кажется Вольво.
@mezahirsliyev433
@mezahirsliyev433 Жыл бұрын
@@asybyrov37 Да ви в общем на пост совке дума что не хватает настояших мастеров и то если и ест такую цену заряжают что легче другую машину купит
@asybyrov37
@asybyrov37 Жыл бұрын
@@mezahirsliyev433 если у вас такое мышление, это ваша проблема. Думайте что хотите.
@dossantos5890
@dossantos5890 Жыл бұрын
На железке работал, слесарь по ремонту подвижного состава. После разгрузки полувагона грейфером или после схода, такая ж фигня - автоген /резак, кувалда, сварка.Ещё кран или тельфер мощный. Выравнивали такие загогулины, что потом думаешь, а как мы это смогли!
@FersaiT
@FersaiT Жыл бұрын
Так вод где собирают грузовики "Мерседес". Хорошо получилось, молодцы.
@techman9894
@techman9894 Жыл бұрын
These guys NEVER cease to amaze me with their enginuety. That chassis repair was an impressive piece of engineering.
@refiii9499
@refiii9499 Жыл бұрын
These guys are no joke! The bust their asses and the work shows! Wow phenomenal job on that frame and the rest of the truck. Very impressed by the amount of sledgehammer work hand made rivets etc etc etc. And to double the frame like that using double the thickness material that was originally used is awesome.
@gamewilderers9272
@gamewilderers9272 Жыл бұрын
Страшно подумать, что бы вы собрали будь у вас производственные мощности. Такой труд вызывает уважение у меня🤝
@Vperedsmotryashii
@Vperedsmotryashii Жыл бұрын
ну так они берут барьер за барьером. Вот буквально на днях китайцы свой самолет пустили пассажирский... И скоро будут штамповать их для всей азии, африки и латинской америки.
@user-rb8lh9qq1g
@user-rb8lh9qq1g Жыл бұрын
Дорогу осилит идущий !!!
@romarem
@romarem Жыл бұрын
@@Vperedsmotryashii китайцы тут причём?))
@user-qx2ic4kt9v
@user-qx2ic4kt9v Жыл бұрын
так им чтобы дать нормальные лебёдки и трищётки эти парни с жыги сделают бугати
@userCPUKZ
@userCPUKZ Жыл бұрын
​@@user-qx2ic4kt9v нах им отсталые на лет 50 "жиги"? ))))))
@TheMokrinskiy
@TheMokrinskiy Жыл бұрын
Удивился, что они радиатор новый поставили, а не выпрямили старый
@user-bl5fp6pb6j
@user-bl5fp6pb6j Жыл бұрын
так они и выпрямили,ты просто еще не смотрел как они радиаторы чинят))))
@amigo.z.3937
@amigo.z.3937 Жыл бұрын
Ооо проффессионал.там работат👍
@user-sq5nx1gs9d
@user-sq5nx1gs9d Жыл бұрын
@@user-bl5fp6pb6jрадиаторами другая контора занимается - туда отвезли и починили kzbin.info/www/bejne/oXbagomLn9iErbs&ab_channel=WowThings
@maxx23AK
@maxx23AK Жыл бұрын
и лобаш
@region9678
@region9678 Жыл бұрын
А наши на заводе готовое собрать не могут))))
@autochampwandelen
@autochampwandelen Жыл бұрын
Now this is amazing! One of the best forms of recycling I've ever seen! Why neglect a vehicle when it can be repaired and reused to its fullest benefit?? These guys have restored a totalled Mercedes Actros to mint, looks as though it came straight from the factory! Greetings from Belgium!
@davidmcc359
@davidmcc359 Жыл бұрын
Okay; I'm not going to speculate on the collision other than if those were the tyres in use at the time, that may well say a lot about the incident. As for the repair, I am constantly surprised at how disassembly of vehicles and their parts into what is nothing more than a massive collection of BITS, is somehow returned to it's rightful place and all without a diagram in sight.. Well done lads
@user-bz8sl1fr3y
@user-bz8sl1fr3y 2 ай бұрын
Эти шины передаются из поколения в поколения))))
@StereoVario
@StereoVario Жыл бұрын
Мужики вообще красавцы. Двойная рама - шедевр.
@user-mq9eg9pc4i
@user-mq9eg9pc4i Жыл бұрын
И всё на заклёпки, у нас болты самоточки делали.
@MrCyanideD
@MrCyanideD Жыл бұрын
Не бит, не крашен, оригинальный пробег :)
@Oleg_Belec
@Oleg_Belec Жыл бұрын
Рама усиленна с завода. Доп опция))
@maxhauler
@maxhauler Жыл бұрын
Really top notch craftsmanship and innovation. This makes me think of what the very best engineering was like in the time of the steam engines. But they will be putting back all the high tech parts on top of this amazing hand restoration of the frame! I never would have thought that truck could be saved. Amazing is the best word for this.
@chrisdooley1184
@chrisdooley1184 Жыл бұрын
That frame rail reinforcing insert is a work of art and definitely made the repair as study as it needs to be. The whole rebuild is just amazing. Pleasure to watch these guys work
@alanmalan3819
@alanmalan3819 Жыл бұрын
this is dangerous to use this truck after that
@jekker1000
@jekker1000 Жыл бұрын
@@alanmalan3819 why? they weakened the original structure by heating it up. to reinforce they put the same thickness structure into the beam and hot riveted it to the original one. the only thing sketchy is the reuse of the old engine bolts with old loctite. I'd exchange these for new ones or at least put new loctite on
@theghostoftravel
@theghostoftravel Жыл бұрын
@@jekker1000 facts
@theghostoftravel
@theghostoftravel Жыл бұрын
@@alanmalan3819 yeah you dont know NOTHING about CARS.
@kanikani5941
@kanikani5941 Жыл бұрын
@@theghostoftravel It looks like you don't know nothing about trucks.
@T.T.N.
@T.T.N. Жыл бұрын
В таких спартанских условиях эти люди творят чудеса! Прекрасная работа, большие таланты и умельцы. Всего вам хорошего!!!
@user-mv9xx1ym4f
@user-mv9xx1ym4f Жыл бұрын
Обалдеть мастера супер Без всяких нанотехнологий сделали такую работу практически на коленке.
@bandika75.22
@bandika75.22 Жыл бұрын
No, there's nothing like it, not now or not long ago..... In the yard, straightening frames, painting.... Well, it's worth watching this video... I've been a body locksmith for 33 years, and I'm still working in the profession, but I take my hat off to the boys. All my respect 👍👍👍 (Budapest)
@tobiasjaeger4266
@tobiasjaeger4266 Жыл бұрын
Im a mecanic fromm Switzerland, and i think this Video and this works on the Mercedes are amazing! The frame rail was de nicest Work.
@mauriciowilson8829
@mauriciowilson8829 Жыл бұрын
Es extraordinaria la labor de éstas personas... Enderezar y reforzar un chasis con una geometría complicada, es una labor que requiere mucha experiencia y habilidad. Es asombrosa la perfección de los refuerzos que agregan copiando las formas y rebajes en sus diseños y líneas exactas.
@angelrojo5045
@angelrojo5045 Жыл бұрын
y muy buena la cabina de pintura....
@andreasteuber8493
@andreasteuber8493 Жыл бұрын
Eine sehr gute Arbeit wurde hier geleistet. Daß hätte ich den Urwaldschmieden überhaupt nicht zugetraut aber ..............wie man sieht so täuscht man sich !!!!!!! Jetzt ist es nur fraglich ob die ganzen Maße und die Geometrie insgesamt stimmt, sonst war die ganze Arbeit ansonst !!!!!!!!
@adrianmoraledezma4969
@adrianmoraledezma4969 Жыл бұрын
Trabajo brutal, se nota que saben lo que hacen
@focusfilms4836
@focusfilms4836 Жыл бұрын
@@angelrojo5045 esa es la mejor parte y con el calor que debe hacer en el desierto eso supera cualquier horno.
@kamilakbulut171
@kamilakbulut171 Жыл бұрын
@@andreasteuber8493 merhaba sanırım almansınız ben türkiyeden yazıyorum eğer daimler-benz bu videoyu görürse mahkemelik olabilirler
@bobevansIW
@bobevansIW Жыл бұрын
Absolutely amazed by the amount of hard labour that was put in to rebuilding this truck. At the beginning I thought it would be a right bodge job. What a result for their hard work 👍
@crxdelsolsir
@crxdelsolsir Жыл бұрын
The West is just so used to throw, replace and profiteering that honest proper repairs are sadly not the norm. With many dubious practices due to low ethics unfortunately your initial thoughts are justified.
@PowerslideSWE
@PowerslideSWE Жыл бұрын
It is a bodge ffs, heating the steel frame to straighten it weakens the structure ALOT. Painting it outside is always a guarantee for a top finish aswell ;) But needs must I guess. Turned out great looking tho.
@andrezesna3920
@andrezesna3920 Жыл бұрын
Rebuilding🤣🤣
@TheOlenyash
@TheOlenyash Жыл бұрын
@@PowerslideSWE they later reinforced that part with a huge piece of metal. Sure, that's not the manufacturer's recommended way of repair, but I've seen worse approaches and this one looks sturdy to me. I mean I would be fine with driving it myself.
@robin1987100
@robin1987100 Жыл бұрын
Was thinking the same. When those additional frame plates showed up things suddenly looked a lot better.
@arbjful
@arbjful Жыл бұрын
That truck looks as good as new after the repair job. Truly amazing skills here. I love the fact these guys are able to repair stuff rather than buy new
@22Epic
@22Epic Жыл бұрын
It only looks good :)
@delcat8168
@delcat8168 Жыл бұрын
@@22Epic chassis is now stronger than the original.
@22Epic
@22Epic Жыл бұрын
@@delcat8168 yeah "stronger"
@alitabbas3685
@alitabbas3685 Жыл бұрын
With such skills no country on Earth should be technologically backward just slow, anything can be copied and built, these ENGINEERS are living proof.
@mandymoo7406
@mandymoo7406 Жыл бұрын
Truly impressive work,I thought they weren't going to gusset the rails but they went beyond that and more and even the riveting first class work
@alantaylor353
@alantaylor353 Жыл бұрын
Oh wow.. They've reinforced it.! I thought they were just going to to pull it back into true & leave it at that.. Well done.!
@mikespain8655
@mikespain8655 Жыл бұрын
Glad they braced the frame. Shining like a diamond in a goat's ass.
@trinidadgranados705
@trinidadgranados705 Жыл бұрын
Si lo reforzado que quedo
@jeryaxez
@jeryaxez Жыл бұрын
Admirable trabajo mis respetos a este gran equipo. Llego en las peores condiciones y quedo como de Fabrica , un gran saludos a todos.
@liontaip6650
@liontaip6650 Жыл бұрын
У ребят золотые руки, однозначно РЕСПЕКТ👍👍👍
@fatimaamghar1912
@fatimaamghar1912 Жыл бұрын
Bravo à vous 👏👏👏👏 Dans de telles conditions refaire une carrosserie entière sans marbre ni outils spécifiques comme possèdent nos ingénieurs, usines et concessionnaires. Un travail minutieux et propre mis à part peut être et c’est sûr que la géométrie n’est pas à 100% car il y a forcément un petit écart mais vu le boulot et sans le matériel, le travail est validé mille fois. Excellent travail bravo les génies
@zaorori8599
@zaorori8599 Жыл бұрын
Même si tu met les trains roulant d’équerre si tés encrages ne sont pas bons sur le châssis tu risque de rouler en crabe , sur du mouillé je n’ose pas imaginer sans parler dès freinages d’urgence En Europe une épave comme ça ça part direct dans le tas dé féraille , nous avons des normes . Déjà que certains bahuts neufs importés ne passe pas à la Dreal car pas aux normes alors un chiffon comme ça waouh . Elle est belle la vidéo mais ne dit rien sur la suite , démarrage roulage freinage comportement ect Le risque de faire des morts sur la route est très grand , je ne voudrait pas le croiser attelé à une belle mère .
@citizenfirst5826
@citizenfirst5826 Жыл бұрын
That was outstanding old school craftsmanship. Metal work done by hand, no computers, just power tools. Detail work was amazing, done outside. That is an amazing crew, keep up the good work and videos.
@rolandvasquez7844
@rolandvasquez7844 Жыл бұрын
If there is money to be made, all will be well
@Lomnjac007
@Lomnjac007 Жыл бұрын
And no measurments whatsoever of the chasys metal work, who cares if it was still under angle, certainly drive train and payload will not...
@ethemgunes46
@ethemgunes46 Жыл бұрын
0
@user-xh7fk4ki4g
@user-xh7fk4ki4g Жыл бұрын
Какая старая школа???? Стапель где!!! Деревня дураков это!!!!
@u-know-this
@u-know-this Жыл бұрын
@@Lomnjac007 payload will straighten it out
@refiii9499
@refiii9499 Жыл бұрын
I’m actually quite impressed with their work! That’s a fantastic hob on the frame. Very impressive work.
@FEAdeES
@FEAdeES 3 ай бұрын
To whoever upload these videos, please provide a backstory to how damage was done. I am curious to know if this repair is truly functional for the long-term and what the cost are all set and done? Thank you awesome content!
@WestSideGangsta
@WestSideGangsta 2 ай бұрын
Damaged, that's the total cost!
@davidsouthy
@davidsouthy Жыл бұрын
The metal fabrication skills blew me away. You guys are masters.
@fix-and-drive-diy-repairs
@fix-and-drive-diy-repairs Жыл бұрын
Absolutely amazing. I like the fact that they reinforced the chassis by adding another box frame. Excellent job 👍
@AB-rl5cf
@AB-rl5cf Жыл бұрын
I was surprised by that too. They made it stronger than the original!
@modifrace8059
@modifrace8059 Жыл бұрын
don't miss the fun video buddy kzbin.info/www/bejne/a6Kuap-Yp7qJnac good
@user-my3zj8to5n
@user-my3zj8to5n Жыл бұрын
Вы такое в первый раз видели
@jay2024
@jay2024 Жыл бұрын
The have to put more material to the chassis because the steel is weaker now
@4rdF1Hunny
@4rdF1Hunny Жыл бұрын
C channel actually
@JB-iw3ui
@JB-iw3ui 3 ай бұрын
It takes a lot of dedication and hard work and determines for salvage workers to replace and fix a damage truck like that. Great work my man.
@federline2413
@federline2413 2 ай бұрын
Молодцы ребята! Отличная работа - усиление РАМА В РАМУ👍Прекрасное решение! Просто круто. Сам занимаюсь техникой!
@SA-yb7mt
@SA-yb7mt Жыл бұрын
I was ready to criticize them as I expected a shoddy repair job but by the end I was amazed at the work they did. Good amount of attention to detail and the reinforcing of the chassis. Many new parts used and the end result was very good.
@michachmiel6210
@michachmiel6210 Жыл бұрын
New plastic but not the right steel. Frame strengthening is a closed profile now and it will soon start to rust. There is a reason why trucks got open profile frames.
@gorgewashington1216
@gorgewashington1216 Жыл бұрын
exept for the dirty and rusted part they dont clean ....
@buellb0y
@buellb0y Жыл бұрын
@@michachmiel6210 That exactly how a double frame from the manufacturer is done.
@michachmiel6210
@michachmiel6210 Жыл бұрын
@@buellb0y It just so happens that I worked on the production of such elements and it is not done. Just because something looks nice doesn't mean it's good. You can convert a Firebird to a Ferrari, but it's still a Firebird, just nicer. Such components are subjected to a corrosion protection bath. You should also remember about the fatigue of the material, which occurred in excess here. Heating and breaking with a hammer will not restore the old efficiency. Welded reinforcement improves performance, but until the steel begins to corrode. Weld spots always corrode first. The only protection used here is ordinary paint. It sparkles until rust comes out from underneath.
@mikeshultz1007
@mikeshultz1007 Жыл бұрын
@@buellb0y Except a double frame from a manufacturer is built from high tensile structural steel and not the mild steel used here.
@electricsnut
@electricsnut Жыл бұрын
Nothing like steel cap thongs… I was skeptical they would leave the frame, then they reinforced it… excellent 👌
@albaarenasbeltran2298
@albaarenasbeltran2298 Жыл бұрын
Ññ
@user-sudhir9592
@user-sudhir9592 Жыл бұрын
Extremely difficult work ....but done very professionally and better than the original...giving extra support to the chassis
@dhanendrakashyap4022
@dhanendrakashyap4022 Жыл бұрын
Bhai aap log kamal ke ho. Bahut achcha kaam karte ho bahut kam sahuliyat me bhi. 🙏🙏🙏🙏🙏🙏🙏🇮🇳🇮🇳🇮🇳🇮🇳
@pzzuo1387
@pzzuo1387 Жыл бұрын
You guys are amazing! What you do with just a cutting torch, welder, chalk, and a tape measure is more than some people can do using computer aided design and a team of engineers!
@xl000
@xl000 Жыл бұрын
not the same quality standard as someone using CAD and a CNC though. It's good enough for parkistan, but this would never pass inspection in any western country.
@pzzuo1387
@pzzuo1387 Жыл бұрын
@@xl000 probably so.
@gorgewashington1216
@gorgewashington1216 Жыл бұрын
@@xl000 of course !
@felixyasnopolski8571
@felixyasnopolski8571 Жыл бұрын
@@xl000 Probably will pass. Cuz they not only straigtened old frame, but also strengthened it. Questions is only to geometry (dimensions) of that frame
@agaragar21
@agaragar21 Жыл бұрын
@@xl000 It already does pass ....in any Auto Body in North AMerica...stop being Jingoistic !
@user-145edxX57
@user-145edxX57 Жыл бұрын
вот это я понимаю профи своего дела!аплодирую стоя!👏👍
@andrewsmirnoff9566
@andrewsmirnoff9566 Жыл бұрын
Можно садиться.🙂
@bin7truck
@bin7truck Жыл бұрын
wow, wonderful video my friend, thank you for sharing this amazing video
@manuelalejandrorodriguezba4791
@manuelalejandrorodriguezba4791 9 ай бұрын
Awesome job!!! Just one question, wouldn't it be better if you make detailed cleaning of each part to make it look like brand new? Like the engine parts, wiring and stuff, I think that would be an extra service for the customers.
@javiermorales7794
@javiermorales7794 Жыл бұрын
I watch these videos all the time and they have helped me become my own mechanic to work on my own car. And the guy swinging the hammer makes it look easy. That was not easy
@user-mw9pe4ks3h
@user-mw9pe4ks3h Жыл бұрын
Парни просто молодцы! Руки золотые.
@100SteveB
@100SteveB Жыл бұрын
It is amazing what skills can be found in so called third world countries. That frame repair was a joy to watch, from how they straightened out the damage, to how they fabricated and fitted the doubler plate. The result no doubt being just as strong, if not stronger than original. Here, in our so called first world countries we would have simply scrapped the whole thing and replace it with new. I cannot help but think about how little energy went into repairing that frame, compared to how much more energy would be used to make a complete new frame, plus of course, the energy we would use in recycling the old frame. We simply waste so much in our 'first world' countries.
@shitmonkey
@shitmonkey 7 ай бұрын
the frame inserts were nice. I don't know about over there but every truck I ever drove (2 million miler) had stickers ALL over the frame saying it was a heat treated frame and not to heat , drill or weld on them.. when you heat thm like that you take the temper out of it... under a load, that frame will bend again.. you guys are hard workers and I do enjoy watching you all
@user-iv9eg3dv8g
@user-iv9eg3dv8g Жыл бұрын
МОЛОДЦЫ МАСТЕРА МОЛОДЦЫ ! БЕЗ СОВРЕМЕННЫХ СОВРЕМЕННЫХ ИНСТРУМЕНТОВ ПРОСТЫМ ПУТЁМ , СДЕЛАТЬ ТОКУЮ РАБОТУ , ЭТО КЛАССНО . ПАКИСТАНЦЫ КРАСАВЦЫ. Я ЖИВУ В ГРЕЦИИ И РАБОТАЮ НА ТАКОМ МЕРСЕ . СОМНОЙ РАБОТАЮТ РЕБЯТА ПАКИСТАНЦЫ .
@user-fu4zn5vj1z
@user-fu4zn5vj1z Жыл бұрын
Да этот мерс сложиться после 3х рейсов
@user-jj7tz5bi7n
@user-jj7tz5bi7n Жыл бұрын
@@user-fu4zn5vj1z не сложит. Подобное встречал. Норм ездит. Ещё пуще наваливают после.
@AlexxxxBY
@AlexxxxBY Жыл бұрын
С чего бы вдруг ему слаживаться? Тут полностью восстановленная родная рама и плюс фактическая вторая такаяже рама вложенная как усилитель, на данный момент в этом тягаче рама надёжнее и прочнее заводской.
@kingevil4698
@kingevil4698 Жыл бұрын
А что в твоем понимании современные инструменты? нано ключи или нано гайковерт?
@user-ll8es8uh6t
@user-ll8es8uh6t Жыл бұрын
УДИВЛЯЮСЬ ВСЕ ДЕЛАЕТСЯ НА КОРТОЧКАХ НО ДОБРОТНО , МОЛОДЦЫ И ТОЛЬКО !!!!!!👍👍👍👍👍
@roadsterman
@roadsterman Жыл бұрын
Excellent workmanship on this repair. The welding looked good also. Good teamwork!
@mikoriad
@mikoriad Жыл бұрын
That frame is stronger than it started.... Excellent work!
@stevenrichardson6793
@stevenrichardson6793 Жыл бұрын
Can't believe how straight the guy with the cutting torch was ! Amazing wish I was that talented.. Great Job these guys did !!
@websitesthatneedanem
@websitesthatneedanem Жыл бұрын
That is impressive! Here (UK), that would just be written off!
@amertwiher2485
@amertwiher2485 Жыл бұрын
في مثل هذه الامكانيات البسيطه لذيكم يعتبر عملكم عظيم و ممتاز و خاصة دعم الشاسيه اتمني لكم كل التقدير و الاحترام و مزيد من التقدم والسلام للجميع من ليبيا
@scroungasworkshop4663
@scroungasworkshop4663 Жыл бұрын
Very high quality work by these men. Who needs a laser cutter when you have some one who can use an oxy torch like that and the man using the sledgehammer must be immensely strong to be hitting like that. I still can’t believe how straight you got those rails and I loved the extra chassis rails to put strength back in the frame. Just amazing work and much respect to you. All the best from Australia 🇦🇺
@martinjilek5422
@martinjilek5422 Жыл бұрын
Jste vážně dobří 👍 takové podmínky a taková skvělá práce 👍 ani v Mercedesu tohle nedokáží!!! Respekt 🇨🇿
@modifrace8059
@modifrace8059 Жыл бұрын
Hello..... don't miss the fun video buddy kzbin.info/www/bejne/a6Kuap-Yp7qJnac
@georgedaniel2588
@georgedaniel2588 Жыл бұрын
I work at Mercedes and that's my specialty.
@stephenaquilina6628
@stephenaquilina6628 4 ай бұрын
Well done men,great work guys,impressive howvyou straightened the chassis.👍👍👍👍👍
@harrysatin5110
@harrysatin5110 Жыл бұрын
This is my favorite KZbin, God Bless Brothers good work, your employer should give you all a pay raise.
@paderaltheajaded.8131
@paderaltheajaded.8131 Жыл бұрын
they deserve respect and a good pay for this kind of job,they are also concerned about the well being of the truck drivers.a salute for this kind of workmanship.
@ricksworlddereaux2397
@ricksworlddereaux2397 Жыл бұрын
This is Pakistan,they happy if makeing 300$ a Months,the owner only makes a decent Income there..this is a 1000$ job,i payd in Mexico 15years ago 900$..🤔third world labor costs nothing...
@abdult146
@abdult146 Жыл бұрын
@@ricksworlddereaux2397 ц
@felipealfredodeblasiramire7091
@felipealfredodeblasiramire7091 Жыл бұрын
Que grandes mecánicos,todo mi respeto y admiración para todos ellos
@lera1170
@lera1170 Жыл бұрын
Геометрия нарушена однозначно, без лазера на глаз не выпрямить никак, а за работу лайк однозначно
@charleswhitlock5238
@charleswhitlock5238 Жыл бұрын
You guys do amazing great work with nothing really but bare hands! No PPE and made that frame way stronger than before!💥👊🏽
@medislivramento1488
@medislivramento1488 Жыл бұрын
Only with the piece of frame they build with that stange shape and perfectly fit inside old chassis, they deserve ALL my respect and admiración! After that rest is peanuts!
@alexadrianmanifold7899
@alexadrianmanifold7899 Жыл бұрын
The skill when he's cutting with the oxygen acetylene touch is amazing. Freehand also.
@PeacockPovertyDotOrg
@PeacockPovertyDotOrg 2 ай бұрын
That is a bad ass truck, it's so satisfying to see it come back to life from a pile of scrap. Having those extra frame pieces would make me feel very confident driving it.
@user-gc2uk7jp5c
@user-gc2uk7jp5c Жыл бұрын
عمل رائع واحترافي ومهارة عاليه وتحترم أشد الاحترام رغم ضعف الامكانيات يخرج مثل هذا الإبداع انتم ثروه بحق شكرا لما قمتم به
@BikolanongLayas21
@BikolanongLayas21 Жыл бұрын
Salute to you guys! As a European trucker I see workshops here in Germany with complete power tools to do this job but with all your skills you get to remake this beautiful actros!
@jamahaslam133
@jamahaslam133 Жыл бұрын
Lllllllllll
@hydorah
@hydorah Жыл бұрын
Yeah, but with that amount of damage? That truck would have been scrapped in Western Europe, maybe that's even where it came from. It was probably exported like that - Which makes what these guys did all the more amazing
@Fr3eZo
@Fr3eZo Жыл бұрын
In Deutschland sowas wieder suf die Straße zu bekommen ist fast unmöglich, da kommste ja in den Knast wenn auffällt dass im Rahmen rumgebohrt wurde😂
@user-rq9fj6kc6p
@user-rq9fj6kc6p Жыл бұрын
Действительно та работа которая достойная глубокоуважения! 🔥🔥🔥👍👍👍
@MAX-ow8di
@MAX-ow8di Жыл бұрын
Это где в Индии
@user-rq9fj6kc6p
@user-rq9fj6kc6p Жыл бұрын
@@MAX-ow8di Иран
@user-so5rf9jb7v
@user-so5rf9jb7v 11 ай бұрын
Поражает их трудолюбие ,смекалка и упорство -браво! Делают все от души и качественно!
@juanserrano8699
@juanserrano8699 2 ай бұрын
Ustedes son geniales, unos maestros!! En Europa ya no sabemos hacer las cosas así. Gracias!!
@DesignThenMake
@DesignThenMake Жыл бұрын
Extraordinary, great job , i wanted to say , heating the framework might weaken that but i saw you made and add another supporting framework, it's amazing, respect to your grand work🔥
@tsoft856
@tsoft856 Жыл бұрын
ikr, cool
@zokirjonaminjonov1674
@zokirjonaminjonov1674 Жыл бұрын
Д
@vercopolis
@vercopolis Жыл бұрын
And his freehand cutting torch abilities 👏
@jeronimoaraujo1033
@jeronimoaraujo1033 Жыл бұрын
Muito bacana. Trabalho artesanal, pesado e de risco, porém feito com capricho e perfeição. Que Deus abençoe vocês cada vez mais.
@modifrace8059
@modifrace8059 Жыл бұрын
Hello... don't miss the fun video buddy kzbin.info/www/bejne/a6Kuap-Yp7qJnac
@balitaupdate1867
@balitaupdate1867 3 күн бұрын
The workmanship is at very high level. Mabruk.
@BraianFerreira1999
@BraianFerreira1999 Жыл бұрын
Um dos melhores vídeos de reforma de caminhão feito em cada etapa. Demais!
@ofarito
@ofarito Жыл бұрын
Soy un ingeniero nacido y criado en México, y sé el tipo de cosas que tenemos que hacer en los países del tercer mundo, por la falta de presupuesto, herramientas y repuestos especialmente importados. Yo mismo hice algunos trabajos bastante asombrosos, pero el nivel que alcanzan estos muchachos en la resolución de problemas, la calidad de su trabajo y la obra de arte es simplemente fuera de este mundo. Y hay que sumar la falta total de seguridad y demás condiciones ambientales en las que tienen que trabajar. Solo tengo que decir JOD....... INCREÍBLE.
@jaimeenriquemendozarodrigu3051
@jaimeenriquemendozarodrigu3051 Жыл бұрын
El estado de los neumáticos de ese camión son pésimos, no se debe circular con esos neumáticos, no es de extrañar accidentes.
@yackir
@yackir Жыл бұрын
Much respect to these guys, the reinforcement was just AMAZING, better than how Mercedes’ did it. Great jobs guys.
@theinterfaithshepherd9075
@theinterfaithshepherd9075 10 ай бұрын
I was amazed that could be done to the chassis! Where was this filmed?
@nickcampbellisadick
@nickcampbellisadick Жыл бұрын
love these vids, only thing that always gets me is the foot wear. I realize it's the norm there, but always makes me nervous. My steel toes have saved my feet a few times. either way mad respect for these dudes.
@edvardbogdanoski4240
@edvardbogdanoski4240 Жыл бұрын
? Ѓоковиќ
@tubeetogoo
@tubeetogoo Жыл бұрын
the factory where actros gets built is actualy one of the most strict regarding safety shoes. In all others you have to wear low ones and there you need high top safety shoes. Also insulted ones against electric discharge because they say even a discharge from your body might destroy some elctric of the truck lol and then there is these guys. mad work
@otto85521
@otto85521 Жыл бұрын
Foot wear missing? How about ear protection during hammering, eye protection during drilling, masks during painting, hand protection in general and and and. I know colleagues with cut of fingers, smashed feets or fingers, cancer in the lunges, scars in the eyes, cutting into legs, and and and. And this in a german factory and workers not following the safety rules.
@guulwade989
@guulwade989 Жыл бұрын
We are Muslims we don’t believe in accidents we say if god almighty has willed it will happen we put our absolute trust in him
@greer8288
@greer8288 Жыл бұрын
That's why you don't see old guys working there. They are dead
@PoloProloGeorgi1
@PoloProloGeorgi1 Жыл бұрын
Crazy and astonnishing handwork under the daily power of sun and heat... wow... big respect!!!!
@adailton969
@adailton969 Жыл бұрын
Uma verdadeira restauração do caminhão ! Parabéns aos profissionais , mesmo com ferramentas básicas com conhecimento e força conseguiram dar vida a este caminhão !
@terrytenley9327
@terrytenley9327 3 ай бұрын
I must say you folks have done a great job.. The frame is straight and reinforced…new pieces brought and used and then painted and put back together.. I enjoy the whole video.. Thank you!
@ricardoassisantonio7784
@ricardoassisantonio7784 6 ай бұрын
Parabéns irmãos , vocês trabalham duro, extremamente profissionais ..... Deus vos abençoe . " Top de linha " . 👏👏👏👏👏👏👏
@aqtobe4166
@aqtobe4166 Жыл бұрын
Парни, по своему вы конечно красавцы. Если учесть чем, где и как. Многие судят со своих миров и колоколен, спора нет увидев высшую лигу.
@user-ex7mz5sw5q
@user-ex7mz5sw5q Жыл бұрын
Под замену только Радиатор и ВОДИЛА! 😂😂😂😂
@jeh1333
@jeh1333 Жыл бұрын
Chassis strengthening is impressive. Overall, great end result!
@user-jc4sv1sx6s
@user-jc4sv1sx6s Жыл бұрын
Усиление рамы чем? Металлом, который гнется как пластилин? Сомнительное усиление
@mstrw4136
@mstrw4136 Жыл бұрын
I don't believe repairing a chassis that's bent like this will ever be good again, but they did strengthen the shit out of it! I wouldn't be surprised the chassis is actually stronger than it was before! Only heavier. Truly very impressive!
@michachmiel6210
@michachmiel6210 Жыл бұрын
Frame strengthening will rust. They made closed profile. That's not how to repair truck frame look. But they used that what they had to do the job. Anyway repair was wrong in longer term.
@zeroyon4562
@zeroyon4562 Жыл бұрын
@@michachmiel6210 A lot of trucks have an inner rail just like they fitted, they’ve legitimately done a good job with this truck.
@michachmiel6210
@michachmiel6210 Жыл бұрын
@@zeroyon4562 Yes thats true, but don't forget they didn't secure that from rusting. Paint used only on visible areas. First thing that is rusting is welding marks. Repair looks ok but in longer term it will break. Not only suspension is working but frame as well. This is not how to do such a repair.
Hino Truck accident made the very badly broken new again | Truck Body Manufacturing
33:38
Miss Delight show something (Poppy Playtime 3 Animation)
00:11
1 класс vs 11 класс ( проступок )
00:24
БЕРТ
Рет қаралды 4,7 МЛН
Restoration Of An Abandoned Subaru WRX -  Genuine Barn Find!
48:44
RRC Restoration
Рет қаралды 6 МЛН
Hino Truck Accident Cabin Chassis Repair | Complete Restoration Video
55:23
Mechanical World#1
Рет қаралды 2,4 МЛН
Apple Vision Pro
0:42
Янчик
Рет қаралды 11 МЛН
Это УНИЖЕНИЕ: Самсунг сделал ступеньки из АЙФОНОВ
0:14
Собиратель новостей
Рет қаралды 268 М.
1$ Handmade Filter for Camera 😱 #photography
1:00
Jean Black
Рет қаралды 16 МЛН
APPLE VISION PRO. А можно деньги вернуть?
18:08
Игорь Линк
Рет қаралды 183 М.
Лучший смартфон для Call of Duty Warzone Mobile
0:58