Mercedes Vito gear change issue 2nd and reverse very simple fix link below for new bush about an hour to fit start to finish www.ebay.co.uk... Patreon: www.patreon.co...
Пікірлер: 70
@jbone-0-9192 жыл бұрын
Great video. As a side note to anyone reading this. I fixed my reverse issue by applying a lubricant spray to the area. There wasn’t much grease and the gears were a little stiff. I sprayed a multi purpose lub on and it seems to have worked.
@noionuk3 жыл бұрын
You are a real Hero. I've spent lots of money for these problems. Mechanics replaced lots of parts, never think about the Bush. I can't believe it, its a the simple solution.
@MikePrice-mg3pc3 жыл бұрын
Thanks for the video. Made the job quick (40mins?) and simple. In fact I found I didn't even need to fully remove the stick assembly. I didn't disconnect the second ball joint: managed to fit the new bush with that second joint still attached.
@MrMeltedwellies3 жыл бұрын
Great to hear Mike
@steviedoo76733 жыл бұрын
I did mine without removing either of the ball linkages. Good video. Next job is to fix the sliding door.
@gerrydavis572 Жыл бұрын
Great video.gonna have to do this to mine soon. Gear change getting very stiff lately. Meantime I'm gonna spray it with motorcycle chain grease .
@MrMeltedwellies Жыл бұрын
Good luck Gerry
@ch41ky8225 ай бұрын
I think i love you. Works perfect 👌 Took me under an hour, Thank you.
@MrMeltedwellies5 ай бұрын
Glad I could help
@ch41ky8225 ай бұрын
@MrMeltedwellies it's an absolute dream to change gear, Someone had clearly had go before and just put a bit of wire around it 🤷♀️ Thanks again
@gjedda634 жыл бұрын
Thanks mate,just saved me from the greedy claws of mercedes. They urged me to buy a whole new gear lever....
@MrMeltedwellies4 жыл бұрын
No problem 👍 Harald
@jeremy_allison4 жыл бұрын
Thank you so much for the video Mark. It helped a lot! Took an hour or so, worked like a charm. Tight and precise now. 👌
@owenblackford54424 жыл бұрын
Did this. 40 minutes, £20! Great fix.
@MrMeltedwellies4 жыл бұрын
Thanks for watching Owen
@booarch4 жыл бұрын
yea just dont this with the kit u shared the link to......what a difference....had a little crucnch on 2nd and all works mint now mate.......thanks
@LawnRight3 жыл бұрын
You make this look so easy! My 2013 vito struggles to get into 2nd gear.. more so in the mornings.. crunching and hard to get in.. plus seems stiff in the movement.. Think Im going to attempt this. What sort of grease did you use to regrease it? Thanks
@behold2832 Жыл бұрын
Did it work?
@BeeIal Жыл бұрын
Hi Mark, great video mate you can’t imagine how much it has helped me. Just a question, my vito is a 2002 112cdi 2.2L would that part work for it ?
@MrMeltedwellies Жыл бұрын
I WOULD THINK SO
@thedamntrain54817 ай бұрын
are you sure yours is a w639? because production started in 2003
@BlueCrow73 жыл бұрын
the squeals of joy when getting it in reverse... bless ya! better than xmas lol
@MrMeltedwellies3 жыл бұрын
dito
@iamnotbitter4 жыл бұрын
Nice one. Thanks to you job done 👍
@nathanlucas64652 жыл бұрын
Very helpful vid, thanks :) Just about to order a kit to do mine. Out of noseyness, what sort of mileage had yours done when you did this repair? Mine is well up over 130k, and there's so much play in the stick that when it's in gear it wobbles side to side as much as it does in neutral!
@MrMeltedwellies2 жыл бұрын
70k thanks for watching Nathan
@nathanlucas64652 жыл бұрын
@@MrMeltedwellies parts arrived today, sp that's my job for tomorrow morning. I'm hoping that tightening up the stick will also make the reverse lights come on without needing to hold the stick in just the right spot!
@jamesburrows21932 жыл бұрын
Just changed this bush now cant get second at all where as i had a very slight crunch before...could this be a new bush problem as it goes into everything but second, any ideas?
@MrMeltedwellies2 жыл бұрын
pos link arm ATB
@jamesburrows21932 жыл бұрын
@@MrMeltedwellies so i ordered another bush and its perfect 🙈
@adrianteper5814 ай бұрын
Just had similar problem was tolled it's the clutch so I got the clutch done or did they just do this and lye about the clutch
@carelkruger95452 жыл бұрын
Excellent job
@MrMeltedwellies2 жыл бұрын
Thank you very much!
@ingojones74042 жыл бұрын
Great video good verbal guide, shame I can’t see what you’re doing .
@francescolanteri40 Жыл бұрын
Bonjour j’ai aussi un vito 109 C.D.I. de 2008 j’ai un problème avec la deuxième vitesse qui craque vous pensez que la pièce que vous changer peut résoudre le problème merci d’avance Francesco
@MrMeltedwellies Жыл бұрын
Hi its worth a try as the part only cost me £10
@wheelyam01 Жыл бұрын
Ca peut etre aussi la commande de l embrayage. Je viens de remplacer la piece,bien graisser, mais ca semble pareil
@jugmohansandhu15674 жыл бұрын
Hi is it the same bush for mercedes sprinters? Thanks
@MrMeltedwellies4 жыл бұрын
I think so
@bastianswe72092 жыл бұрын
I have a left-hand drive Vito. We are driving on the right side of the road here in sweden and I wonder if this one fits my car or is it just for right hand drive? Its a Vito 639 and year model 2011.
@thedamntrain54817 ай бұрын
I know its very late, but yes its the same
@powerkitemad3 жыл бұрын
Could this be the cause of my second gear crunching?
@BlueCrow73 жыл бұрын
Mine does that.. I had wondered whether it was cables or needed an oil change. Did you try this bush fix and did it work?
@powerkitemad3 жыл бұрын
@@BlueCrow7 I haven't tried the bushing fix yet but will report back when I get the time to have a stab at it.
@eoghanhennessy4432 жыл бұрын
Mine does go into second properly did you guy fit this
@swaggslide3 жыл бұрын
This the same on a w638? Got the problem its not going into reverse like 80% of the time
@samysamsoum29983 жыл бұрын
Salut 🤔Comment changer sa sur w204, merci
@vasyvieriu5423 Жыл бұрын
Salut! Imi poti supne de unde ai cumparat piesa? Te rog
@MrMeltedwellies Жыл бұрын
eBay
@thedamntrain54817 ай бұрын
gasesti pe Emag
@behold2832 Жыл бұрын
Can anyone tell me who had this problem and fixed it with this solution, whether when the bushing was bad, did it crunch into gear? Did this solve that? Thanks.
@TheDazza2 Жыл бұрын
I did this today, real easy and fixed the problem
@StephenBurke-e1m9 ай бұрын
Am doing this at the moment. Can anyone tell me how to remove the cup holder/ash tray?
@samysamsoum29983 жыл бұрын
Thenk yo
@robertkiss68643 жыл бұрын
Link! Pls.
@Mrmaxiu1272 жыл бұрын
I have the same problem Vito 2017 🤔
@juniorboy69593 жыл бұрын
I have the same problem. I need the reference pls
@jamesgilderoy74693 жыл бұрын
Can you send address we’re to buy Merc vito111reverse kit bush