Mercedes W164 ML350 Fog Light Replacement/Upgrade

[@giorgivaramishvili8235]

well, you just need to remove Fog light plastic cover from the front and 3 torx screws. then you have access to the fog lights, no need to disassemble whole car :)

[@ProjectZGarage]

thanks for the info

[@reedickyaluss]

Right. lol

[@AlwaysnboostGT500]

👌🏾

[@richardhurst7173]

Pop the black cover off much easier, around the light

[@aali1500]

Al never right!!!

[@ProjectZGarage]

That is true!

[@devdogs911]

Can’t be right 100%

[@jojo-qy1qq]

He was right in this case!

[@bonglarida6175]

Do you have video on how to change the parking lights bulb on ml350 2011...... thanks

[@ratcat7668]

WTF are you thinking man? The covers pop off in 5 seconds and three screws later you have the globe in your hand. Takes 2 minutes!

[@damienpaden658]

You don’t have to take all of those parts off just to change those bulbs your doing it the hard way!!!!!!

[@ProjectZGarage]

I also had to do the headlight bulbs so i did both at the same time.

[@waliagovind]

You should .just remove the front plastic and do this in 2 mins. Too much extra work for a bulb replacement

[@ProjectZGarage]

Yeah I was also doing the headlights so it made it easier. Also when doing it from the front you have to be careful as the tabs like to break.

[@hingtong5110]

Kinda complicated, man. You had to remove tire and so many screws.....

[@ProjectZGarage]

you can pull the front grill off to just get to the foglight but you have to be careful as the plastic can break.

[@anthonybailey4267]

This guy doesnt know his stuff to replace fog lights you just remove the grill around the fog light then use t25 to remove wheel does not have to be removed he didnt do his homework the headlight are also removeable from inside the engine compartment

[@danielebarrasso1559]

Tossico bastava leva la plastica davanti al faretto e svitare 3 viti....hai smontato mezza macchina...non stai bene