Mercedes w211, w219 camber adjustment.

[@dn0682]

Happy to share my experience, make sure if you install the slotted bolts when tighten only turn the nut on the bolt as otherwise turning the bolt itself wi sheer the guides inside the bushes.

[@Carlos-ib6gl]

Incredibly useful video, i am learning more and more about cars everyday even tho it's my job, i learn more everyday. This video is perfect. It perfectly explains how the camber bolts work and not just how to install them. I was looking for info on how they work and how to adjust them and this is the only video that gave me every mething I needed. Love this guy.

[@AndyDento21]

I have just installed this bolt myself for my 2004 C Class to correct caster on the drivers side and if it was not for this particular video I would of never of known it was even a possibility. Thank you for the useful video dude!

[@rleslie845]

I had no idea those tabs are inside the bushing. Now the slotted bolts make sense. Thanks!

[@piertrib7765]

Hello, many thanks for this video. Indeed I was looking to understand how to potentially correct camber on my W211 and couldn't find this information easily. I just replaced the lower spring arms and the lower torque struts with a new Lemforder kit and with my ignorance I just installed it back with the original bolts. I will soon get my alignment check and see if I need this camber correction or if it's fine with the original bolts. In the meantime I'm going to check your other video to rebuilt the original MB arms that I kept. Greetings from France

[@Az-dq1gm]

Was looking for this. Thank you.

[@chrisward7038]

Really helpful video, now I understand how these work! I was puzzled as they weren't excentric bolts.

[@dn0682]

Thank you

[@AndyDento21]

I needed to see this video so much because I have a caster issue on my w203 chassis Mercedes Benz C220 Coupe.... I rang Mercedes and they do have this for both front arm (caster) and rear arm (camber) and the bolts for my car anyway are only £10!!! I was shocked as it's a bargain!!

[@175bantam175]

thanks for this. as you say this info is not widely known and have recently changed lower arms ect and the camber is wrong due to not using new fluted bolts which correct camber.

[@StoianAtanasov]

Thank you. I also did not find information about this.

[@simonhills9813]

Great desription. Thank you!

[@dn0682]

Thank you, English not my first language but I am happy to share as I found nothing on internet in regards of this.

[@user-rh8wf8pe9b]

thank god for you and your simple to understand and better see with my eyes how to i ask a question

[@dn0682]

Ask anything, I am happy to help as I have been in the same not knowing what was wrong.

[@afzaalkhan.m]

Thank you very informative Afzaal.M.Khan Pakistan

[@keahea5713]

Very helpful

[@jejeodong]

Many thanks

[@zanastumasonis]

thanks!!

[@emiliyanhinev9511]

Well done Interesting video

[@dn0682]

Thank you

[@ahmadsadi1]

It’s thank you

[@vincentcowart5133]

Does that camber adjustment bolt come with one of the kits you purchased

[@lorenreyes2855]

Great video Sir! I learned a lot from your video. Now I have subscibe to your channel. I kept wondering about the camber. When I change the thrust arms. I looked at the slotted bolts in fcp and mine are different? I saw your video! Fantastic work!

[@dn0682]

Thank you, I am glad that I could help and from feedback many people find it useful.

[@huskywiz]

Dorin, you have lots of Strings to your Bow, I hope there are plenty of Notes coming Off,,(smile) £,s. well done.

[@dn0682]

Thank you, only sharing my experiences as I learned everything hard way by trial and error.

[@andrewthompson4068]

1 picture is worth a thousand words...more knowledge gleaned while drinking tea,, thanks

[@dn0682]

Thank you, honestly when I posted the video I was kinda held back by what might people say or even laugh at. Cheers.

[@kamelkhalifa6113]

How I can buy this tools

[@tariqkhan-kiyani3948]

Great video! I plan on changing the camber bolts as soon as I can get hold of some. I have a w212 with a knocking noise from the front when going over rough surfaces. I've changed the drop links, but it didn't help. My usual workshop guy says to change everything in one go, including the shocks, I think he doesn't know what the problem is. Any ideas what could be the reason for the knock? Thanks.

[@dn0682]

On w212 suspension is different more precisely Mc Pferson, knocking can be fron top struts mount as they have integrated bearings, also check balljoint and drop links.

[@tariqkhan-kiyani3948]

@@dn0682 Thanks for the pointer. The drop links have been replaced, but that didn't resolve the issue. I have asked the mechanic to check the top mounts, he says they look fine. Is there a particular way of checking these, or would they have to be taken out in order to assess them?

[@dn0682]

If the top mount is faulty then will make noise when let's say going on a speed bump and once on top of it suspension is fully compressed then on the descent part suspension and wheels are relaxed and there should make noise if faulty.

[@tariqkhan-kiyani3948]

@@dn0682 Would it make the same noise when it drops into a shallow pothole?

[@dn0682]

Yes as springs will push and if mount has play knocks as is not solid enough because it has bearings and moving flanges.

[@Gibonz]

Is only 1 camber bolt required to each corner? And does this bolt work in both front and rear of the car? Thanks

[@dn0682]

One camber bolt per side on the steel arms not aluminium ones, rear wheels only have toe adjustment, if excessive camber is observed than replacement of bushes and rose bushes required.

[@third763]

Hello Sir. Do you know why when i adjusted Toe angle after using camber bolt, the angle camber also moving as i am adjusting the toe

[@dn0682]

Hello, an 1.5 negative camber is accepted by Mercedes repair manufacturer, can't have 0 camber as the car suspension wasn't designed like that. The kit only reduces excessive camber.

[@third763]

Thank you for the feedback. What i was trying to say is while i am adjusting the tie rod for Toe spec, the camber spec is also moving.

[@yannisp9222]

Hi Dorin. Why don't you do more Mercedes videos? The views on those 4 Mercedes videos are so much more than the chainsaw ones.

[@dn0682]

Hi Yannis, yes I know that but luckily not much wrong with the car and doesn't really require work done. Chainsaw videos are more for me to have them saved for future, anyway I don't seek popularity or to be payed by KZbin, it's only as hobby.

[@lonelyrider8756]

Hi. How can i assemble the orange part? I have a problem in that piece and i don't know how to take it out. Thanks

[@dn0682]

Hallo. The sway bar link balljoint need to be pressed out and for that you need a hydraulic press and some adapter to go over the balljoint and press out. There is another method to use brute force by hammering out the balljoint from the nut side.

[@user-ix9tk8ne6y]

Привет, все можно сделать проще, чтобы не снимать рычаг с машины, есть специальный съемник.

[@dn0682]

If I only understand that will be great.

[@cooksey187]

Are the camber bolts for the rear, where can I purchase these and do I only need to bolts for rear camber adjustment on my w219. It eats the insides of the rear wheels.

[@dn0682]

For the rear you need suspension arms upper changed and the rose bush ,the swivel bushes , there is no adjustable camber bolt yet available. I know aftermarket there are some adjustable upper suspension links but I haven't used and can't comment. I suppose you have air suspension and if so depends how low the car seats, the lower more negative camber more wear.

[@cooksey187]

@@dn0682, I have a 09 cls cdi, no air suspension, I just wondered if I could use the same or simular bolts on the rear?

[@mzee5533]

I messed up my tyres after changing these control arms

[@dn0682]

In what way you messed up the tyres? Obviously tracking is required after any suspension components intervention job. Have you had the bolts installed? Give us more details please.

[@vincentcowart5133]

O I found it .

[@mihu202]

Hello! Im assuming both arms from each side will require this kit,right?!

[@dn0682]

Depends how bad the other arm bush and balljoint is , there are different bushes for the aluminium arm wich controls the caster, they need to be more flexible as is more movement in the bush. I personally bought new arms as balljoint is not replaceable and changed the bushes that they came with to the Lemforder ones, I am in Essex and I can help to have the bushes pressed and also to buy the right ones.

[@mihu202]

@@dn0682 Appreciate your help but im located in US.All arms are new replaced them few months ago with lemforder too.I remember seeing those “ears” inside the bushings but obviously original bolt doesn’t do anything to adjust those.Guess ill order all 4 bolts for all bottom arms and see if im going through tires like crazy still(every 9 months im throwing tires out the window because of inside wear).Also whole front end its pretty much brand new.

[@Dnasty1]

Does the car come stock with the ability to adjust camber you just need to buy that bolt?

[@dn0682]

I am not sure if Mercedes installed the slotted bolts from the factory on some cars but you can find the bolts on eBay quite cheap. Anyway another car manufacturer scam as they show install the bolts themselves since the option for adjustment exists.

[@david19971023]

@@dn0682 may i ask where can i find this ? key word?

[@andrvis]

Salut! Dacă schimb brațul ăsta trebuie refăcut unghiul?

[@dn0682]

Da sigur, este cel principal al suspensiei fata si influenteaza foarte mult unghiul de fuga si cel cu asfaltul ( camber angle).

[@gigione1989]

Salu! Un cod de referinta gasim?

[@dn0682]

Cod pentru bucse? Sau pentru bolturi?

[@gigione1989]

@@dn0682 pentru bolturi (șuruburile acelea de reglare a unghiului de cadere) Si va multumesc frumos pentru raspuns🙏🏼

[@dn0682]

DACA te uiti atent cand arat punga cu suruburi se vede codul care e afisat si incepe cu A............

[@gigione1989]

@@dn0682 am inteles Gata, dau calitate mai buna la video si ma uit Multumesc frumos 😇😇

[@dn0682]

Am alte filmulete si acolo se vede

[@doylejones8688]

This is about the dumbest thing Mercedes has ever done! This is just cheap as hell for a performance car!