Mesh Analysis Problem 3.52

[@MatthewEmillio]

hey.... how did you get the positive value for the first value in the first loop ?

[@shivamdutta2157]

Matthew Emillio same doubt here bro

[@ezurachan]

Why is the 12v source positive when doing kvl in loop 1?

[@Shumayal]

Thank you... can you please confirm sir if you made an error while doing mesh analysis..as there really seems to me and other people who commented...

[@AraujoMatt]

Dealing with resistors on the outside edge of a mesh can be confusing. Watch carefully, because I explain in the video: using the 0 current loop on the outside you get -1k(0-I1) = 1kI1

[@JonJoony]

Thanks :D Helped alot

[@McStroke23]

why is the 1k resister on the left positive when the current goes through the negative terminal and the 2k resister is also positive? since 1k resister has the opposite sign, shouldn't the 2k resister have the opposite sign too?

[@mochithegoldie]

I think KVL@i2 should go like this -6 - 1k (i2-i3) - 1k (i2-i1) = 0 Since you are on Loop 2 This is what our prof. taught us...