𝗡𝗲𝘄 𝗠𝗲𝘁𝗵𝗼𝗱: Metahuman to Marvelous Designer/clo3d in Minutes!

[@HQ-PARK]

𝗜𝗔𝗠𝗜𝗠𝗔𝗚𝗜𝗡𝗔𝗧𝗜𝗢𝗡 Digital Fashion Short Film: kzbin.info/www/bejne/gmnFl6uLappkr68si=C0oo88czecDs9p3p Original tutorial: kzbin.info/www/bejne/e3S3i2Nvf9GMhdksi=Af_0Md8E6WTG0qC9 Mixamo to metahuman: kzbin.info/www/bejne/pZqZaGebZcZnpq8si=VhNXyXvR9l1pDuF6 Marvelous designer textures In UE / UDIM: kzbin.info/www/bejne/lZfEd42aqryjpJosi=jhfx3s_lYlhggs2_

[@Luckymich77]

I just want to let you know, this is the most LEGIT way of donning metahuman clothing right now. I am not sure if its because I have a mid-range computer or not but Chaos Cloth is SO time consuming. I have tried so many different methods, MetaTailor, but I always come back for this workflow with Marvelous Designer to get the best cinematic quality clothing for my character. You, are a genius!

[@HQ-PARK]

Appreciate your lovely comments! For now this method gives best result for me as well. But Clo and unreal try to make it easier as I know, so very soon the time will be coming that we could just focus on our ideas. :-) anyway thanks again! Your comment means a lot to me!

[@wang3D]

Your videos just get better and better showing more efficient methods for the pipeline. But your final render is also beautifully lit, would love to see a tutorial on how you light your scenes in UE

[@HQ-PARK]

thanks for your support.I don't really have a formula because I go by feel when setting up my lighting. But if I come up with something good to share, I'll upload it.

[@melissa.m.conway]

Thank you! I can't begin to tell you how helpful this is. Everything worked fine until the garment refused to play. Following a tip I found in another video, I imported the alembic file into Blender and then exported it back out again, and it behaved beautifully after that. Subscribed!

[@HQ-PARK]

hello universe. Thanks for your support! and sharing your tip for others :) I actually use blender before UE as well but not same reason as you. Anyway appreciate your comment and subscribe!

[@BACCAJIMIN]

I'm having a same issue, everything works until importing garment abc file and it doesn't work. How did you export from the blender? Can't figure out exporting options...

[@melissa.m.conway]

@@BACCAJIMIN Have you tried the new CLO/MD LiveSync plugin for Unreal Engine?

[@ivoneko6750]

ahhh I was stuck on this problem all day, thanks to you I solved it! I should have checked comments earlier haha Thanks!!

[@hyunjoonkang9154]

튜토리얼 처음 만드셨을때부터 따라하고, 개선판도 따라해봤는데 개선판의 개선판까지 만들어주셨네요ㅋㅋㅋ 개인적으로 블렌더 부분이 어려웠는데 이렇게 새로 만들어주셔서 감사합니다~~

[@HQ-PARK]

hello universe. 네 이제는 또 다른거 만들어봐야죠. 블렌더를 거치지 않기 때문에 더욱 쉽고 간단한 것 같습니다. 훨씬 쉬워졌으니 앞으로 멋진 것 많이 만들어서 공유해주세요. :)

[@EmpticStudios]

As always quirk, thanks for always taking your time to help us, your supporters!

[@HQ-PARK]

always thank you for your support!

[@noorhamdani3280]

damn.. this is kind of a tutorial we needed. Underrated! Thanks

[@nourhassoun7099]

Thank you so much! The shoes issue has been driving me crazy. Amazing video. I'd love to see how you built out the environment and lighting for this project.

[@HQ-PARK]

Thanks!

[@jderinor530]

this why i love this channel mo gate keeping at all

[@HQ-PARK]

it's growing!

[@pinareris]

Thank you! for this video.. This was the best tutorial i ever watched for the MD Unreal process

[@HQ-PARK]

Thanks! have a good day!

[@cyberatman8419]

Awesome dude!!! 10 tutorials in 1. Very helpfull!!! Thank your so much.

[@HQ-PARK]

cheers! 🙂

[@minyorrk]

감사합니다! 시청 전부터 너무 기대가 됩니다

[@HQ-PARK]

감사합니다! 도움이 되는 영상이기를

[@zinteractive]

The same shoes you exported was later on replaced with the original, that's the whole point of changing it back to match the mesh, am I right?

[@HQ-PARK]

hello universe. well done :) original sneakers has actually interact with body animation.(especially shoe tongue.) but we selected metahuman base skel for shoes when we import shoes back. so it doesn't actaully have same physics. that's why it mismatches.

[@알파벳-g3d]

명강의 넘 감사합니다! 클래식이 브금이라 엉덩이 흔들면서 작업하게 되네여

[@byright6536]

안녕하세요! 마블러스에서 언리얼 엔진으로 가져갔을 때 같은 프레임으로 작업을 했는데도 살짝씩 옷이 몸을 뚫고 들어가는 상황이 생기더라구요.. 혹시 그러신 경우가 있으신가요..? 제가 마블러스를 대충 영상 3~4개정도만 보고 옷을 만들어서 그럴 수 있지만... 찾아보는데 잘 모르겠더라구요ㅠㅠ 리토폴로지를 안했는데 리토폴리지 때문인가도 생각해봤습니다..!

[@HQ-PARK]

안녕하세요. 언리얼엔진에서 옷이 몸이 뚫고 나오는 현상이 발생하는 경우가 있습니다. 마블러스 디자이너의 문제라기 보다 언리얼엔진에서의 버그일 가능성이 높다고 보고 있습니다. (대부분 프레임 단위로 끊어서보면 문제가 없습니다.) 이 현상의 완전한 해결책을 드리기가 조금 애매한게 저는 주로 이 현상이 잘 일어나지 않고 일어나더라도 제 방식대로 커버를 하는데 그게 다른 구독자님들께는 적용이 되지 않는다고 하시는 분들이 계셨습니다. 몇가지 팁을 알려드릴텐데 테스트를 해보시는 것이 좋을 것 같습니다. 1. 타임워프 세팅 변경: 마블러스디자이너에서 의상 애니이션을 녹화할 때 프로퍼티 에디터에서 time warp를 1이 아닌 2로 세팅하고 녹화한다. 녹화가 끝난 뒤 내보낼 때 timewarp값을 2에서1로 변경한 뒤 내보내거나 2로 내보낸 후에 언리얼엔진 레벨 시퀀스에서 지오메트리캐시를 가져온 뒤 속도를 2배 빠르게하여 속도를 오리지널과 같은 속도로 맞춰준다. 2.구독자 중 한분이 공유해주신 내용인데 alembic파일을 언리얼엔진에서 가져올 때 옵션값 중 [Constant Topology Optimization]을 활성화 시킨다. 위 방식 혹은 다른 방식으로 해결하셨다면 댓글로 남겨주시어 다른 분들께도 공유해주시면 감사하겠습니다.

[@byright6536]

@@HQ-PARK 감사합니다! 한번 해볼게요!!!

[@_bymahi_]

Thank you very much for your good teachings. I encountered a problem and I would appreciate it if you could guide me. At 4:16 minutes, when you want to control two animations on the control rig, when you right-click on the body, there is no option for "bake to control rig" for me. How can I activate the "metahuman_controlRig" item?

[@HQ-PARK]

If so, uncheck ‘filter by skeleton’ where above bake control rig menu if my memory is correct.

[@_bymahi_]

@@HQ-PARK Thank you🤩🥰

[@stiguma2425]

감사합니다 영상 보고 문제를 해결할 수 있었습니다. 그런데 마지막에 렌더링된 영상이 엄청 자연스러워보이는데 혹시 언리얼에서 포스트 프로세싱이나 다른 후처리 방법을 사용하신 것일까요?

[@HQ-PARK]

안녕하세요. 언리얼엔진 내에서 포스트프로세스볼륨으로 러프하게 노출 값이나 온도 정도 잡고 프리미어프로에서 색감을 잡아주고 있습니다.

[@stiguma2425]

@@HQ-PARK 답글 감사합니다. 많은 도움이 되었습니다.

[@jbach]

One issue I am having after several tries. When I import the PoseBase+Target Animation sequence to Marvelous Designer the first couple frames, especially ends of arms, hands of my avatar are greatly distorted. Any suggestions on what might be the casue?

[@HQ-PARK]

What version did you use? I think it will work better when 5.21 or 5.32

[@ondrejgavenda4417]

Hey! Did you resolve the issue? I'm having the same problem

[@romanbruni]

nice solution for rigging nightmare... although it seems that this route requires animation to be created before the clothing... 그래도 cheers from Rio !

[@HQ-PARK]

hello universe! you can watch [mixamo to metahuman] tutorial to get animation without rigging before you start this tutorial. cheers from another universe.

[@BACCAJIMIN]

hi, my alembic file(garment) doesn't seem to have geometry cache(animation) baked in when I'm importing it to Unreal, it works fine in MD, but after exporting and importing exactly you did, it still is not working. Garments doesn't fit to the metahuman when location is copied and pasted as well. How should I fix this?

[@HQ-PARK]

I guess you didn’t import it properly. Make sure that you select ‘geometry cache’(NOT static mesh) in import option in UE. And I’ve got no clue abt ‘garment doesn’t fit to your mh’ it’s only copy and paste the location so must be in same place. Explain more :)

[@aadithrs9077]

i have the same issue. DId you find any fix ?

[@aadithrs9077]

i have the same issue. DId you find any fix ?

[@lotuspond0]

너무 멋진 영상과 튜토리얼에 감탄하면서 봤습니다. 마침내 제 캐릭터도 옷을 입혔습니다. 제일 위기였던 부분은 Geometry Cache 문제였습니다. 밑에 분들 댓글도 꽤 있는데, 이렇다할 해결법이 안보이더라고요. 아무래도 버전이 올라가면서 옵션이 달라진것 같아서 언리얼로 알렘빅 파일을 임포트 할 때 Sampling Type을 'Per X Frames'로 바꿔봤더니 퀔님처럼 문제없이 들어오네요 부분적으로 몸이 옷을 뚫고 나오는 문제가 있어서, 해결하고 제 캐릭터도 한번 보여드릴께요~ 무엇보다 한글로 이렇게 글을 남길 수 있어서 너무나 감사합니다. 정말 최고이십니다!

[@HQ-PARK]

칭찬 감사합니다. 몸이 옷을 뚫고 나오는 이슈는 늘 고질적으로 나오던데 저는 메타휴먼에 opacity 맵을 하나 추가해서 옷이랑 겹치는 바디 영역을 컨트롤하는게 제일 편해서 그렇게 해결하고 있습니다.

[@lotuspond0]

@@HQ-PARK 겹치는 메타 휴먼 메쉬를 어떻게하면 떼버릴까 꼼수를 생각 하고 있었는데, 간단한 꿀팁이네요. 감사해요.

[@aadithrs9077]

@@lotuspond0 did u find any solution to this issue? I;m having same issue

[@Frits_Mulder]

Thank you so much for this, awesome workflow.

[@noorhamdani3280]

4:02 from where this lookback animation come from?. I am not able to find in the animation menu.

[@HQ-PARK]

I think I searched for “look behind” and “looking”.

[@faustoprieto9497]

You are great. Thank you so much.

[@proyectojs]

hey ty for ur knowledge u r a genius, could u also make a video with all this pipeline and livelink , so we can have facial animations as well ?

[@HQ-PARK]

Yes if there’s good chance, I will.

[@yungchillboy4170]

hi quirk , can u show how to add custom shoes or accesories to metahuman avatars?

[@HQ-PARK]

hello yungchollbody from universe. what a chill nickname. yeah, they will be coming.

[@nuzulaqmal]

How to use wind directional in UE5 for geomatry cache clothing?

[@HQ-PARK]

wind in ue can't affect geometry cache.

[@新蒋]

At 4:17 seconds when I select Bake To Control Rig, I don't have any ControlRig to choose from, what's going on?

[@HQ-PARK]

if it's not appear, you must uncheck(or maybe check) 'Filter by Asset Skeleton'(you can see it above 'Bake to Contril Rig')

[@MaichanLita]

Thanks for this tutorial Quirk! 🙏🏻🩷

[@HQ-PARK]

hello lovely universe! thanks for your expression!

[@VideoMonk.]

Hey! I am having the same issue for the alembic cache that doesn't show in sequencer (it only shows one frame). If I import it to Blender then into Unreal it works fine, but the cloth overlaps! If anyone has a solution it would help a lot!

[@HQ-PARK]

In my experience, that only happens when simulation quality is set to 3 in MD.(if it works in blender well) and of course you need to select ‘geometry cache’(not static mesh) when you import alembic in UE.

[@VideoMonk.]

@@HQ-PARK Thank you for your response! I found a solution! For anyone trying what I do: import to blender as Alembic check that you have the same framerate as in MD And finally in the modifiers under MeshSequenceCache, change the velocity Unit from Second to Frame => This fixes the overlap issue!

[@aadithrs9077]

@@VideoMonk. Thank you so much for this tip!

[@aadithrs9077]

If u change the simulation Quality to Animation (Stable) it will directly import to UE

[@mervesa17]

Hi, when you 'replace skeleton' with face at 6.20 , for some reason I cant find that menu. I using UE5.03 ,is it only available at UE5.3.2? Thank you soo much for this tutorial🙏

[@HQ-PARK]

I’m not sure but yes I think it’s about version. I did this in 5.3.2. Maybe 5.2 could work fine as well.

[@ondrejgavenda4417]

I just export the animation and when I'm importing it back, in the pop-up import menu I select the face skeleton 😉

[@ntotheizm]

love the music here

[@jomaxz89]

Damn I tried this workflow with METATAILOR and it took me like 2 minutes rather than 22.

[@HQ-PARK]

if you don't need cloth physics, Metatailor will be wonderful method! This is for simulating clothes using Alembic.

[@jomaxz89]

Ahh good point I see what you mean. What if you go from marvelous to metatailor to UE chaos? Would you still get the same effect. Excuse my ignorance I’m still new to these tools.

[@HQ-PARK]

I think it would be easier to go straight from Marvelous to UE to use chaos physics, but it's a very fresh idea. You might want to give it a try.@@jomaxz89

[@МарияАдамович-ш6ф]

And one more question. please tell me why when I choose Bake to control Rig, I have 0 items, even when I enter the MetaHuman_ControlRig search? It's in your video 4:1718:22

[@HQ-PARK]

If you don't see [MetaHuamn_ControlRig], try disabling [Filter Asset By Skeleton] above [Bake To Control Rig].

[@МарияАдамович-ш6ф]

@@HQ-PARK thank you very much it really helped

[@artorbek]

Thanks. U saved my life

[@malkoshart]

Would you point out how to change the facial poses animated or not

[@HQ-PARK]

I used Livelink to make facial anim. you could easliy find bunch of great tutorials on youtube :)

[@yashpanwar555]

Hello bro I just one more help, I imported my alembic file in unreal engine but I want to use textures in UE only. When I imported an FBX from MD I had given different slots for my outfit but in alembic there can be put only one material for the whole outfit, can you please tell me how should I export from MD as an alembic file but still could use materials of UE5??

[@HQ-PARK]

Check out clo livesync plugin which automatically creates material slots. If you want to do it manually, you should import obj(or fbx) and abc in blender then implant material from fbx to abc then export to UE. ( it needs few steps to get it done, so you better check out clo livesync first).

[@EdwardT-pb1ps]

Hello Quirk, Is this a workflow that would ensure the clothes physics would be more accurately rendered without poke-throughs for the specific animation? Could you please explain a bit on the concept behind your workflow? It seems rather lengthy and tedious to set up. What happens if you don't include any animation into the workflow and drape your clothes on the metahuman in Marvelous Designer. Will that not work? Many thanks.

[@HQ-PARK]

This workflow simulates a MetaHuman's clothing inside Marvelous Designer and brings the simulated animation (geometry cache) into Unreal Engine. It is primarily recommended for use when you need a detailed representation of your clothing animations.(like cinematic animations) It is of course possible to apply clothing to your MetaHuman without animation. This essentially produces the same result as 'clolivesync' plugin, but I personally prefer to use this method because it is more reliable.

[@EdwardT-pb1ps]

@@HQ-PARK many thanks for the explanation

[@mohammadbishalahmed8784]

could you please make a video how can we add face animation like your last moment animation video in mixamo only make body animation not face like your

[@HQ-PARK]

long time no see. thanks for your comment. you can use livelink with your phone(as i know, both android and ios are supported). I may come back soon with new contents but not sure it's about tutorials. i need some shift myself and my channel :) hopefully stay tuned!

[@alessandrodealmeida6334]

Amazing video! I just have a little problem, when I cut the frames (1-29) everything works fine, it begins in A-Pose but the second animation is broken and the mesh is a mess! Do you know what can I do about it?

[@HQ-PARK]

good to see you. :) You should make sure that the second animation is fine when used on its own. there could be retargeting issue, check out one of my contents 'tip and fix'

[@andreaaltran2606]

Hello there! have you found a solution for the hairs( groom) collision with metahuman? 🤗

[@HQ-PARK]

I haven’t :( I will list in my plan.

[@Kirill28465]

Bro you're just a miracle thanks

[@HQ-PARK]

bro you're my miracle :)

[@aadithrs9077]

Bro , U saved my life

[@egorcore7617]

Hello, quirk! what do you think about using the Metatailor app?

[@HQ-PARK]

For gaming purposes or purposes that don't require a lot of movement of the garment, Metatailor is a great choice.

[@egorcore7617]

@@HQ-PARK Bro, why can't I see garments geometry cache, when I import alembic to UE5? Only trims are visible, but no fabric... I repeat every step after you, but it still doesn't work. Please, help

[@egorcore7617]

For some reason, only 'thin unweld' configuration works, I tried several times ...

[@HQ-PARK]

I don't get what's wrong. do you mean [thin , unweld] works but [thick, weld] not working in UE? @@egorcore7617

[@egorcore7617]

@@HQ-PARK Yes

[@Wsw_7]

Hey, is anyone having an issue getting the clothes to fit to the avatar? Upon dragging in the clothes, it says something akin to 'Avatar must be pre-registered'

[@HQ-PARK]

if you bring divided metahuman(by head,body,shoes) with anim, it's not the avatar, only mesh with animation). so i would bring registered metahuman avatar first then fit your garment then import mh fbx with animation then simulate.

[@Wsw_7]

@@HQ-PARK When you say registered metahuman, do you mean non-divided? Because even when I save it as avatar, it continuously asks me to redo the draping. The only garments like T-shirt fit onto it, but any purchased garments or the sweatsuit you designed doesn't fit. It asks me to redo the draping. You wouldn't think about just putting on an example Unreal project :') - would be so awesome to have for my assignment. The clothing moving beautifully in the wind 🌬👕

[@HQ-PARK]

The reason you are getting that message is not because of your MetaHuman, but because of cltohes. My understanding is that the outfit should probably be simulated on the avatar provided by the Marvelous Designer in order to auto-drape. you can also make that wind effect by MD :) you can do it! @@Wsw_7

[@d.uppy23]

Hi, Nice video. I wanted to ask about using Quinn as base rig to transfer the data to the MH. Because I am using a female MH the height difference affects the animation sequence of my MH. Is there a way to use a smaller rig or make the FBX file given by MixamoConverter smaller to fit the rig of my MH? Thanks for the tut its very helpful

[@HQ-PARK]

Normally female mh works fine with Quinn. Do you mean height is changed like stretched?

[@d.uppy23]

@@HQ-PARK yes the height is changed and it warps my MH Mesh I can send images if you direct me

[@d.uppy23]

@@HQ-PARK Quinn measures closer to 180cm and my MH is ~150cm according to blender. When I transfer animation data from Quinn to my MH it stretches my MH mesh to ~180cm. Let me know if there is a way to fix it

[@HQ-PARK]

@@d.uppy23 kzbin.info/www/bejne/eZvCq3apqtdqiJosi=lSF3AYIfa-WB1w6e Check out this!

[@RafaBlack38]

Hi, why does UE5 5.3 go into crush when I import an alembic file?HELP ME PLEASE

[@HQ-PARK]

i'm not quite sure about that. well i guess probably not enough disk space or memory. test it with simple tshirts if it works.

[@mrkshh]

u work on laptop?

[@RafaBlack38]

@@mrkshh no , I have a workstation , I think this is a problem between ue5.3 and alembic files

[@HQ-PARK]

this tutorial was made on UE5.3.2. this issue could happens because of gpu setting. @@RafaBlack38

[@RafaBlack38]

@@HQ-PARK my alembic files is 16gb , but i made marvelous simulation with 20 particles distance …what can I do ?

[@mrkshh]

bro, you are the best

[@HQ-PARK]

you're too!

[@DGS140x]

Thanks a lot for this tutorial, basically it work with the animation already fully done ? With this method I can't import the cloths and then animate or do any editing on my animation ? Thanks in advance for your help.

[@HQ-PARK]

hello universe and thanks for your support. yes, it needs metahuman animation, checkout [mixamo to metahuman] tutorial in stick comment to get animation. this method is for clothes simulation purpose that won't make it move in unreal engine.(garment anim must be simulated in MD then import it into UE).

[@jbach]

May I ask what Particle Distance you set for your rendered garment? And do you use a larger distance when working? Lastly, what does the prefix MG stand for? Thanks again for these great tutorials!

[@HQ-PARK]

hello universe. I was waiting for this question for very long time because I saw some of my subscribers used MG . Actauly it's just metahuman name.. MinGu who's one of my friends name. lol

[@jbach]

@@HQ-PARK Thanks. Great music choice and editing too btw. Would be great if you could do a quick MD tutorial showing how to apply simulation properties on any garment and basic Simulation Property settings, Particle distance etc. This took me a while to figure out.

[@lauramarie4342]

Thank you for this Great Video!! I just have a Problem Clo3D wont recognize that my MH is in an a-Pose even if it is…can someone help me with this?

[@HQ-PARK]

Hope you already found the way.

bro there is an option for chaos Cloth in UE why you did not try it??

[@HQ-PARK]

hello universe. I tried it and seems unstable to express garment physics yet compare to alembic. (maybe i need to study more). anyway I will upload the tutorial for you someday.

I am always waiting for you@@HQ-PARK

[@alphaturtle4839]

does this only attach the clothes during animation sequence?

[@HQ-PARK]

@@alphaturtle4839 maybe?🤔

[@jbach]

Have spent several days trying to resolve an issue with my alembic file after importing to Unreal. When I try to animate by entering PIE or changing Start TIme Offset I get the following error in the Output Log > LogGeoCaStreaming: Tried to map an unavailabe non-requested chunk: 1. Any chance you have experienced this or can suggest a solution? If I import my alembic to Blender , then export before importing to Unreal, it solves the issue but this seems like it should be an unnecessary step.

[@HQ-PARK]

Sorry I’ve never had that issue before. Maybe some other subscriber knows?

[@ondrejgavenda4417]

Thank you SO MUCH!!! 🙏😍

[@HQ-PARK]

you're welcome! Stay tuned

[@Jairik0]

Hey bro! I am following the tutorial, but when I place the 3 animation sequences together for exporting the mesh they are separated from each other, the head mesh is levitating above the body, any idea?

[@HQ-PARK]

try this one, open level sq - select mh in viewport - Details - Body - Animation - [check 'Disable Post Process Blueprint'(test both check then uncheck if it's not wokring).

[@Jairik0]

Thank you man, in the end it was the unreal project bugged, however, I got it working once, now, i redid with udims like in your other tut and the new alembic is not importing the geomtry cache I don't know why, tried importing and exporting from blender and nothing either(In blender it has the geo cache)@@HQ-PARK

[@HQ-PARK]

I have experienced something similar and that is when I set the simulation quality to 3 when recording in MD. If that's the case, try any number other than 3. @@Jairik0

[@Jairik0]

Yeah! got to that conclussion by trying too, thanks bro! It is sad cause it would be awesome to have ultra crisp simulations in unreal, it would look 100% realistic with good texture, only thing that puts you off is the geo. Thanks for the pipeline, first time I manage to get MD into unreal@@HQ-PARK

[@GS-fb2xq]

What an amazing video!! I did all the steps mentioned in the video, and when I put the 3 animation sequence and press simulate. the head and the feet work but the body collapse. do you have any idea what can cause this issue? thank you!!

[@HQ-PARK]

hello universe. thansk for your expression :) but can you explain more aobut this issue? this tutorial doens't need to simulate in UE, play that in level sequence. As I understand it, you're using a three-part metahuman, and the metahuman body is physically applied. Did you use the original metahuman?

[@sofiashanovska441]

Hi I'm following your tutorial step by step for my project and for some reason UE5 has a problem with importing the alembic file? It says the error that it's not a valid file type, do you know what is the issue and how would you solve it? Thank you so much

[@HQ-PARK]

hello universe. I'm not sure why you have that issue. check 17:58 then make sure you set exactly same import option value as mine.

[@ondrejgavenda4417]

Try placing it somewhere else in your computer. It's probably because the alembic file has non English letters in file path. I fixed this problem by saving the alembic file directly to my Windows SSD (C:) folder. Hope it helps 😊

[@HQ-PARK]

Thanks for sharing your knowleadge! @@ondrejgavenda4417

[@hongminpark9442]

love the intro !

[@HQ-PARK]

youtube can't express film grain i added well. need to figure out soemhow later :) anway cheers!

[@edfuz_]

ITS SO USEFULL! but i want to ask, how do you import seperate 3D model and animation to Clo3D and then combine it there?

[@HQ-PARK]

things you asked are all in this video, check out.

[@BibekBista-s5v]

Hlw. Metahumans feet is slightly in the air after combining base pose and main animation. Is there any fix?? Please let me know if there is any

[@HQ-PARK]

this might help you. kzbin.info/www/bejne/eZvCq3apqtdqiJosi=Y3Wva8W7hz_x523f&t=176

[@新蒋]

At 8:44 seconds, my body went straight down, I couldn't find the reason, but everything was fine when previewing the animation, help me, I'm about to break

[@HQ-PARK]

i don't understand the meaning of 'my body went straight down'.

[@МарияАдамович-ш6ф]

Can I delete shoes directly in the program UNREAL?

[@HQ-PARK]

check out my latest tutorial about shoes. it's not about your question but you can learn how to delete shoes in UE. basically if you want to use barefoot metahuman, you should download metahuman without shoes from metahuman creator becuase metahuman with shoes has no feet mesh when you remove shoes.

[@Wsw_7]

Hey, is there a way to just download the project? I will pay. I want the animations, but am having a difficult time with getting them to work in Marvelous

[@HQ-PARK]

I don't plan to sell my project sample yet. what's your issue?

[@IacopoLilli]

my man thanks for ur work is lovely i'va an issue when i try to export to unreal form MD, i use the same parameter as u do but when i import in unreal my alembic file is empty or very little parts is showing, what can i do ? thank again anyway

[@HQ-PARK]

thanks for your supporting and comment. well, off the top of my head, there're few ways that you can try. 1. unit scale(MD): make sure it's exported as CM.(if it's still not working, try different unit scale) 2. import option(UE): make sure you select geometry cache, not static mesh(i don't think this isn't the cause) * you can also check your alembic file in Blender first before UE to find what went wrong. let me know :)

[@IacopoLilli]

after a day of trying i get the proble was th eparticle distance, but now when i iimport in ue i have it but doesent appear the geometry cache in sequencer, i have tried this on blender and there it works fine the animation@@HQ-PARK

[@HQ-PARK]

did you set simulation quality to 3? there's kind of bug, if so set other number except 3.@@IacopoLilli

[@aryanbarure1479]

MD says cant fit arrangement points cause of pose but this is my 6th time making my MH go into A and even tried T, no luck :(( Any suggestions?

[@HQ-PARK]

Well, if so you need to manually create fitting suit. I guess newer version has built mh avatar. Use that one and import mh anim if needs.

[@dolgrentaps]

hi thanks a lot for your videos, i have a big problem i have a running animation of a metahuman. when i put it on blender there is no collision problem but on unreal at times the skin goes through would you have a solution to this problem? it may be due to the fact that i have to export from blender to unreal for the geometry cache to work. have a good day

[@HQ-PARK]

Did you import MH that fbx from blender in MD? If so, export mh as abc in blender.

[@МарияАдамович-ш6ф]

please tell me what is MM_WorkFlow ? how can I install it and where can I look for it?

[@HQ-PARK]

just follow this tutorial. MM(MH to MD)

[@arifiqbalmochamadrizky818]

thanks quirk!

[@HQ-PARK]

well, thank you! enjoy my tutorial. and make wonderfull stuff :)

[@iPEMiC.]

Was wandering how can we add props like a chair at the time of character for a simulation in marvelous?

[@HQ-PARK]

good to see you. you can [import(add)] and [add] as [avatar].

[@negoyo5918]

Thank you! ❤

[@HQ-PARK]

*Thank you too* :)

[@soniabashash3041]

Thank you!!!

[@HQ-PARK]

no problem!

[@PhotoSlash]

does this work also for CLO3D, right?

[@HQ-PARK]

@@PhotoSlash yes same

[@PhotoSlash]

@@HQ-PARK thanks, i'm trying to export just a metahuman with a static pose, is there a way to export it without using an animation?

[@HQ-PARK]

@@PhotoSlash if you wanna export mh with default pose, you can just export skeletal mesh of body and face but if you wanna specific pose, anim would be good choice. i guess you also can bake static pose to use 'convert actor to static mesh' in ue but i haven't tried.

[@eileenhuang2342]

Hi! Thank you so much for this helpful tuitorial! I followed your video but ran into a problem, and been trouble shooting these few days but still no luck. I want to ask and see if you might have a better idea of how to solve this? I am at the last stage and exported the alembic file then when I am added the garment geometry cache file to the sequence, it doesnt show that the file has the animation of the garment(the garment file row for the sequence doesnt' have the pink strip like yours kzbin.info/www/bejne/pIncpaZ3dtN0itU, it's blank, and I assume the animation frames didn't came with the file?) when I played it it just show the body movie but the garment is static...I wonder if you might know what happened with this or how to fix it?

[@HQ-PARK]

by any chance, did you set simulation quality to 3 in MD/CLO? there's a bug that UE can't read geometry cache when it's set to 3 in MD.

[@eileenhuang2342]

@@HQ-PARK Thanks so much for helping!! I remember there is a fidelity setting that I put 3 for, but my menu looked different than yours when I clicked on the UV auto pack so I thought just leave it at 3. Is that what you meant by simulation quality setting to 3? Or is that a different quality that I should check at a different menu page. I tried changing the fidelity to 5, on my end, but it did'nt bring the animation still when I imported it to UE

[@HQ-PARK]

​@@eileenhuang2342 If you're using the Cloi, you'll find the button on the left. It is to select between 1 - 5. If this is not the issue, there may be an issue with certain values when importing from UE. If it were you, I would check to see if the alembic file is giving the same error in blender or other 3D software.

[@eileenhuang2342]

@@HQ-PARK thank you so much!! turns out the file was not at simulation quality 3, it was at 4 already. I tried what you siad which is exporting to blender, and it was working in blender just not in UE! so I reexported the alembic file out from blender to UE and the animation came along this time!! HORAY! Thanks so much for helping me out!

[@hitman2411]

Hi, does this workflow work to clothe a metahuman so it can be played in game wearing custom clothes from Marvelous Designer?

[@HQ-PARK]

No it’s not for game!

[@hitman2411]

@@HQ-PARKI don’t suppose you know the proper method for doing this for realtime?

[@Cuevasfilms.]

El mejor 💕

[@HQ-PARK]

Long time no see :) hope this save your time!

[@BinWang-b7f]

You are such a romantic gentleman (or girl). Thank you very much for bringing us confidence and hope.

[@HQ-PARK]

mirror! such a romatic word 'romantic' forgot this word for a while. thank you!

[@harees1647]

my clothes overlap why!?

[@andrewdileo]

You need self-collision and to tweak dampening

[@jbach]

Thanks for posting! I think there may be a bug in how MHs assign skeletons as is shown exactly kzbin.info/www/bejne/pIncpaZ3dtN0itU It seems as though the male SKM is pointing to the base skeleton and preview mesh inside the Metahuman/Common/Female directory. Am I wrong? If I can reproduce will submit a bug report.

[@HQ-PARK]

hello universe. thanskf ro your support and comment. yes, I think it's a bug. it happens when duplicate animation sq. Duplicating the anim sq seems to change the previewmesh to the default.

[@jbach]

@@HQ-PARK Thanks. This is the first tutorial without narration I've followed from beginning to end. Actually gone thru several times now! Please keep them coming. Especially interested in any clothing workflow where the animation is handled entirely by cloth physics in Unreal!

[@HQ-PARK]

thanks for that jbach. it's happy to hear that you watched beginning to end without narration, I know it needs more concentration. thanks! i've got lots of stuff to share with you guys so I want to upload regularly but when I start client work, i only focus on that. anyway I will upload more. 🙂 @@jbach

[@mohammadbishalahmed8784]

1st comment!

[@HQ-PARK]

so quick!

[@mohammadbishalahmed8784]

@@HQ-PARK always wait for your video please make glass type polythene type material dress clo3D to blender

[@HQ-PARK]

nice to hear that my subscriber waits for my video. means lots to me. anyway, i think you can control transparency material in blender, not clo. just set glass or translucent BSDF.@@mohammadbishalahmed8784

[@mohammadbishalahmed8784]

Then how to show in unreal that transperent materials?

[@HQ-PARK]

Material system in UE is different from Blender actually. you need to set translucent to activate additional material slot in UE. I will put that on my tutorial list :) not sure when thou. @@mohammadbishalahmed8784

[@nickslayton4095]

This is useless to me, I am partially visually impared, the images I can see ok, However the text I can not see. KZbin creators need to learn to always use comantary otherwise this can be classed as discrimination. Also there is no features on the avatar like hair, skin. etc making it no good for doing a static image render in MD/Clo3D. And to do cloths correctly you really need 3 poses available in MD/Clo3D, A-pose, Low A-pose, and arms by there side pose. and that is before you worry about animations.

[@zadvornyros]

I have a problem. I edited my metahuman target morphs (i.e - I displaced the face). When I export animation sequence in UE those morphs don't apply. Any tips for that? Thanks in advance

[@HQ-PARK]

Do you mean that you edit and add morph in blender or something? If so I think you should use fbx converter 2013 in advance before importing in blender.

[@zadvornyros]

@@HQ-PARK already solved that🙏🏻 I created a custom morph tag for the body in Cinema 4D and it works in UE. But it didn't work when I was trying to export the animation sequence to Marvelous Designer. So the solution is right after the step at 05:00 (exporting animation sequence) you open that animation sequence and at the bottom section there's a “Cuve” setting. You should add a curve with the name of your new Morph and set the parameter to 1, click save and the Metahuman animation sequence has all those morphs and then you can proceed to divide the Metahuman into parts

[@zadvornyros]

@@HQ-PARK I could share step by step screenshots so you might include this method into another update of the tutorial