MF 135 Head Gasket

[@ourdown-homelife3956]

Hello from NS! Great video Dave, thanks!

[@CanadianRedneck15]

Howdy neighbor! Glad you enjoyed the video, thanks for watching!

[@copperjacket00]

tiz the season, you going to do some shootin or what? just saying love your tractor vid.s but love the shooting vid.s too .

[@CanadianRedneck15]

I hope to get something interesting shooting wise in before too long.

[@danieledistefano3651]

Thanks for the info! Great channel

[@CanadianRedneck15]

I am glad you enjoy the videos, thanks for watching!

[@rosk3165]

thats a knife😀

[@CanadianRedneck15]

LOL yeah, does the trick. Thanks for watching!

[@UserName-vf8rw]

What do you expect a typical person would take to do this time wise?

[@CanadianRedneck15]

Depending on how handy and comfortable you are with the work, from 3-6 hours I would say. There is quite a bit of stuff to come of so you can actually get to the head. Thanks for watching!

[@randomlyfunny2657]

Hey dave, i have a mf 135 and some times when i am driving the right tire kinda locks up but not all the way. It has internal breaks i think because i cant see a drum. Are those hard to work on, it has not caused any operating problems but worried a bit with winter coming on. Some times it will go a long time with out doing it. What would you do dave.

[@CanadianRedneck15]

That does sound like a possible brake issue, as far as I know all of the 135s had drum brakes, but I've been wrong before. :) If it does have the internal disk brakes it's not a difficult job but there is some heavy lifting, you have to pull the rear axle and housing off of the differential case. I have a video on that style brakes here kzbin.info/www/bejne/h361YXesoaxsm8k Thanks for watching!

[@randomlyfunny2657]

I was messing around with it yesterday and as long i keeep the dif. Lock all the way down it is fine but i cant get it to back to one tire spin, i think it is sticky and stuck in lock position and when i pull up on the foot lever maybe just partiely unlocking. Do you think this is a possability to you

[@CanadianRedneck15]

@@randomlyfunny2657 I think you are going to have to take it apart to see what is going on in there.

[@andyd2960]

My chief complaint here is that you went too fast through this and didn't really explain much about what to expect and what to look for. It's great for someone that has done this before but I'm not that guy. I really don't want to have to call a mechanic for this one.

[@CanadianRedneck15]

I will keep that in mind for the future. Thanks for watching!

[@RossC-d9f]

wish you would have shown how to tourque the short bolts that you can't get on with a tourque wrench

[@paulrobison4234]

I got a 444international diesel do you have a video about the head gasket for that

[@CanadianRedneck15]

I don't have a video for the head gasket specifically but I do have a series on rebuilding a BD154 . The process would be quite similar as this one, just the specs would be different. Thanks for watching!

[@piotreknowak4131]

Oglądam wasze naprawy ciągników. Posiadam international 434 .super kanał szkoda że do Kanady daleko 😉

[@CanadianRedneck15]

I am glad you are enjoying the videos, thanks for watching!

[@MegaBait1616]

thumbs up Dave as always...............

[@CanadianRedneck15]

Thanks buddy, hope you are enjoying life!

[@ihus9950]

👍

[@jesserush3552]

I have fracture cracks between cylinders 2,3 and 3,4 on block on top ,when i went to do head gasket, is the block garbage?

[@CanadianRedneck15]

That is not uncommon. Best bet is to look for another block though it may be hard to locate one, next best option is to see if you can get it welded. Cast is difficult to weld so search out a reputable welder. Thanks for watching!

[@jesserush3552]

Thanks for the info

[@AbdulKurad]

Good sir thanks 🇮🇳👍🚜😁

[@CanadianRedneck15]

I am glad you enjoyed the video, thanks for watching!

[@ericjoubert441]

What tool did you use to cleanup the block surface? Great Channel!

[@CanadianRedneck15]

I use a 3M cleaning disk on a die grinder, it's like a plastic brillo pad type thing. Thanks for watching!

[@danielmckay3458]

Don't get too aggressive with that die grinder flap wheel I've seen it cause low spots flat body board works pretty good