MG 1/100 STRIKE FREEDOM CUSTOM BUILD with Resin Conversion Kit

[@rogechuy2013]

This is sick!!! It's like comparing a stone with a diamond!!! 🔥🔥🔥

[@empxstudio]

Thank you

[@mollyday9288]

absolutely mind blowing, such a great job

[@empxstudio]

Thank you

[@zullionaire]

I forgot how many time i watch this already. Because for me this resin design looks better than mb & mgex

[@muhdshafizabdaziz5029]

One of my favorite Gundam 😊

[@katsurahigurashi6409]

Beautiful, what a great job congratulations

[@empxstudio]

Thank you ☺️

[@kumikohirasawa8126]

That is soooooo gorgeous!!! This is my favorite gundam and I actually got the same set a while back and maaaaan mine looks like trash compared to yours hahaha I still worked hard on mine though I had no idea about these resin sets you could get I’d love to do the same to mine someday! Be awesome if you could name off some of those chemicals you use on the regular! I’d love to be able to get into such high detail like that 😁

[@d9_1056]

HOLY SHIT. Just got to the reveal. My God man. Beautiful Beautiful work. Absolutely amazing.

[@empxstudio]

Thanks mate 😊

[@ibuki-chan5654]

Thanks god you have the seed too, otherwise we couldn't have been able to watch such masterpiece

[@RaıserMK2]

Bruuuuh this is pretty gorgeous!! Good job! Keep it up bro!

[@empxstudio]

Thanks Bruuuh, will do 😊

[@rafdimm]

Duude you're extremely patient🤯

[@ashfox2012]

The way you present your vids reminds me of studio g’s vids a lot hahah 👍

Beautifull... That's true art...

[@deronarthur0824]

This is amazing. I love this gundam so much

[@empxstudio]

Thank you

[@arisanjani9490]

Impresive work dude, hope you still healty and make another video

[@empxstudio]

Thanks dude !

[@xxnike0629xx]

😲 This looks like the MGEX ZGMF-X20A Strike Freedom Gundam! Very impressed!

[@empxstudio]

😅

[@rx-105xigundam2]

@xxnike629xx So that why you should go back in building a kit again and starting to relearn your lost skills instead of spamming _wishlists_ and hoarding *BOXES* 👍

[@awtguitarz]

I disagree this design looks a lot much better than the mgex ✌

[@jumaidilfitri1916]

wowww.. look amazing.. good job.. very beatifull strike gundam

[@empxstudio]

Thank you

[@adityanoviant8180]

fortune meow resin kit.... 🤩🤩 now i m doing it with my justice

[@jttownsend3576]

This looks great! Good job!

[@empxstudio]

Thank you 😊

[@franzvivar3843]

What can I say? PERFECTION!

[@empxstudio]

What can I say ? Thank you !

[@wongemi]

It is so satisfying and relaxing to watch you build gunplas. Do you have any tips for beginners or amateurs?

[@ActionQ]

Thanks for the detailed process! 👍👍👍Great work. I have the strike freedom v1 unbuilt. I feel like without upgrading it with the resin kit, it’s not worthy.. even with extra panel lines 😩 I need this kit, but sooooo much masking

[@empxstudio]

Thank you. Go for MGEX ?

[@tendousouji14344]

if you built it during its release this is the best anime adaptation of the unit but since techonolgy upgrades they pump up the kit haha

[@mussim2919]

Looks so awesome! Love it!

[@타즈몬]

진짜 예술입니다 최고입니다~!!

[@soseji]

Awesome!! 👍

[@empxstudio]

Thank you ☺️

[@93gamrx]

Simply, beautiful 😍

[@empxstudio]

Thank you

[@aFinalNote]

Very nice, i may buy a set. Thinks its ok to use Tamiya TS on the resin?

[@리미안트]

가조립만 하는 사람으로서 너무 대단하네요

[@xavierwalko4175]

Ya lunatic, you made it look like you got the MGEX early! There is a Shining Gundam conversion kit for the RM Strike, so Alie Shining soon maybe?

[@avellanozagunpla9074]

SO RELAXING

[@user-vs1bh7dd8h]

Beautiful! Good job. 👍👍👍

[@empxstudio]

Thank you

[@play_happy_AKA]

so fantastic I love it😘

[@SpideyDarmawan]

Amazing this one of my favourite gundam too great job

[@qalaquendi2]

Its nice and all but buying the MG + resin, might as well buy MGEX no?

[@thebigbient8736]

I painted the gold accents on the wing funnels by hand with enamel, fuck that lol 😂 I see you cut the pieces off of the shoulders as well and had to make your own tabs lol…anyways, very nice work! Looks amazing!

[@empxstudio]

Thank you 😊

[@aka6576]

你真有耐心！

[@Hungzilla]

Can someone explain to me cutting every piece out of the runners? What do you do with it after to know which piece is which? Or is that part of the fun for people, hunting for the piece the Manuel is asking for?

[@raph_clair]

Amaaaazzziiiing

[@michaelcortez6596]

Amazing job!

[@aldidwiki6803]

I like this video, i hope you can make some video like this again with another gunpla 🤘

[@sion1885]

How do you hook up the funnel effects? The instructions are terrible letting you know what to do with them

[@rongting8139]

nice work

[@nickolasip1010]

Amazing work!

[@empxstudio]

Thank you

[@PEPXI_gkworks]

Job well done

[@empxstudio]

Thank you

[@Exaris79]

Dragon Momoko's Metal Build KO Strike Freedom with the metal inner frame looks similar to the conversion kits. This seems similar but has better accentuated features compared to the Bandai's Metal Build. Still hoping that there's a conversion kit or adapter for the original MG Freedom's Plasma Beam Cannons on its wings that can be integrated into the Strike Freedom's wings.

[@empxstudio]

🤔🤔🤔

[@icantthinkofaname.7302]

I had to read the title again since this looks so much like the MGEX

[@Qens2007]

哦吼～可以期待魔改了

[@empxstudio]

下一个吧， MGEX 😅

[@Qens2007]

@@empxstudioOKok🤣🤣🤣

[@reygendary]

Keep up the good work!

[@empxstudio]

Roger that !

[@girl.9595]

완성한 작품 사진 더 보고싶었는데 너무 짧아서 아쉬워여

[@OwenNovakChildofGod]

Sorry if its a dumb question but whats the blue stuff? Is it putty?

[@ripdoses]

Looking good

[@empxstudio]

Thanks

[@林靄民]

遮蓋地獄，要很有耐心，相對完成時會很有成就感

[@empxstudio]

認同 ！

[@hafizolanwar7887]

Masta

[@King_of_Antisemites]

Is there any steel kit version of this? With real nuclear engine, of course.

[@cskem1]

오~~~멋집니다^^

[@erwincoplo6305]

Lovely. What psi do you use? I spray 3/4 layers because im scared of pooling and drips.

[@empxstudio]

Thank you. I don't actually focus on psi, just go by feeling. Normally it stays at 18-20

[@d9_1056]

Just curious, what does resin do? Can the kit not look the same without it?

[@bahamut_the_warrior]

Resin pieces are sold separately from the original models and can be used to swap out armor parts (or even frame parts) of the original kit to enhance the look of it. Without resin parts, standard kit. But resin requires lots of discipline and tools to use because it is different from regular PLA or ABS plastic.

[@d9_1056]

@Bahamut BoHamut what's special though? Just looks different?

[@NzStudio00]

@@d9_1056 resin is more expensive than abs and also very toxic yet sturdy than abs.

[@bahamut_the_warrior]

@@d9_1056 yeah it also requires paint. Depending on the brand you buy it from it could convert one kit into another kit, or change the shape of armor completely

[@bahamut_the_warrior]

@@NzStudio00 yes and resin is very toxic. Sanding it (and regular plastics too) is really dangerous because inhaling resin dust can hurt your lungs and uncleaned or treated resin can also irritate skin too.

[@SH-ns2fy]

厲害！

[@zakku.1357]

Tbh, this looks better than the mgex

[@empxstudio]

Thanks 🤣🤣🤣

[@casediedwell5094]

You using the blue tack to just hold the parts in place so we can see it? The 'snap' together (or get glued) later?

[@empxstudio]

Some parts still using blue tack because the gimmick will stuck if using glue

[@vinuyajohn719]

Dang this looks like a daban MG a lot of details

[@miguelmarquez2852]

Can it still be posed after?

[@ri_z_ki__4181]

What's the name of all the tools you are using If I may ask?

[@kataonly9233]

This kit seriously need a 2.0 treatment!

[@zacc6963]

can you link to the second set of cutters you use?

[@bbb5akkrawat771]

Can use with freedom 2.0 ?

[@weiss9263]

hey can u link me the tool u use to pop off the parts without breaking them?

[@KSUBlueDragon]

Wish I could get this kit in the states.. the resin kit that is.

[@王小牛-p6o]

好酷 讚👍

[@empxstudio]

謝謝😊

[@husnynurizal6519]

Wow..

[@johnraymhormedes978]

This is so sick, I just recently bought MG Strike Full burst mode and try to convert to MGEX by customizing it. This is exactly what I want to see. Is this resin kit applicable to MG Strike Freedom Full Burst mode?

[@y_o_z_]

AFAIK The difference between the MG SF and the FBM is that the basic kit consist of Strike Freedom, it's weaponary, decals and a base. Meanwhile Full Burst Mode is the basic kit with gold coating parts, a special clear blue base, and Dragoon effect parts and stands for them.

[@HungTran-to5en]

Nice

[@ryocore1286]

発売する前にMGEXを見た気分ですわ。

[@user-jirnrnary]

為甚麼要在多買一個套件？那是幹嘛的？

[@wahyudi594]

Nice bro

[@empxstudio]

Thanks bro

[@rx-105xigundam2]

Dude, I'll just gonna give you a friendly warning... That Nike629 guy in your comment section (the one with a chibi ELS Qan[T] pic), he's actually a troll who is already banned in several channels, forums and groups... How you'll deal with him is of course, still up to you. Have a nice day 👍

[@sung-hantsai4243]

太帥了！

[@empxstudio]

谢谢

[@kanjanai2534]

Good job i diea to mgex strike freedom

[@jhiand]

Hi just wondering but while working with resin I see you didn't need to sand the parts in a water bowl or so, are you just in a ventilated area? heard resin is quite bad for your lungs and all

[@empxstudio]

Yes. I wear a mask when sanding it

[@MJRLHobbyStuff]

Nice! Subbed

[@empxstudio]

Thank you

[@myxmaster8537]

@ 14:43 😂😂😂

[@afwanafwan6884]

What is the sauce??? Of this gunplaloved ur video by the way😍😍

[@empxstudio]

The resin parts purchase link is on the description 😊

[@rosiwanbarokah6998]

what this blue?,gluetack?

[@nivlaxtended]

Ah final boss Gundam.

[@MrHinatainn]

When you have the skill to make MGEX but can't wait for the actual kit.

[@empxstudio]

🤣

[@yusufrais8454]

Where you can buy resin convertion?

[@empxstudio]

Hi there. The link is on description

[@葉元元-b6j]

請問有推薦遮蓋性強的白色漆嗎? 謝謝

[@empxstudio]

蓋亞031

[@凱黃-t7n]

請問財喵喵的萬事屋要去哪裡買

[@empxstudio]

淘寶

[@skeeithlulu5160]

太强了

[@鄭立品-t2f]

好帥

[@empxstudio]

谢谢

[@jonathanmora8208]

Amazing gundam but I recommend throwing the pilot to the toilet

[@empxstudio]

Why ? 🤣

[@lb5344]

1:30 我想問是甚麽，我是新手。

[@empxstudio]

GK改件

[@bananakhio]

godtier

[@russelveganeucleonps4plays820]

MG 1/100

[@benpease598]

Dude I'm sorry about that kit every thing was working against you there ngl

[@吳鎮宇-y7c]

想看PG完美攻擊鋼彈加GK套件IWSP

[@empxstudio]

沒這套件吧😅

[@吳鎮宇-y7c]

@@empxstudio 我有啊～

[@meikisaragi1445]

Damn. It turned to an MGEX kit lol

[@권강욱-i8t]

Oh my god....

[@ngwaimingngwaiming289]

go for mgex one

[@chepixequilibrium]

the default version looks like an HG

[@weskerlee1518]

做龍騎兵和nu鋼彈的浮遊炮一樣累