MG 1/100 Zeta Gundam Ver. KA | ASMR Build | Mobile Suit Zeta Gundam

Master Grade Zeta Gundam Ver. KA
Mini-review / personal comments :
This kit is incredible in details, add those decals as well, even more detailed. The build is solid as well for the most part, the arms feels a bit shaky especially since it has a locking mechanism for the transformation. Speaking of, the result is spectacular but it is an absolute pain in the ass I'm sorry. The waist is so difficult to open up and I can't get the flying armor to connect to the forearms. Also for those that apply the decals like myself, the transformation is just begging for you to scratch it off (I lost 4 decals in the process). Overall fantastic Ver. KA kit, excluding the transformation and it looks stunning on my shelf.
Thank you for watching :D
Feel free to leave a like and subscribe!
----
Chapters
00:00 - Unboxing
01:14 - Head
01:58 - Chest
03:22 - Arms
04:51 - Waist
05:40 - Legs
07:29 - Flying Armor
08:27 - Pilot Figure
08:35 - Beam Rifle
09:00 - Beam Sabers
09:10 - Shield
09:37 - Grenade Launchers
09:50 - Decals
10:35 - Assembly
11:11 - Waverider Mode
12:12 - B-roll
---
Track: Falling - Declan DP [Audio Library Release]
Music provided by Audio Library Plus
Watch: • • Falling - Declan DP | ...
Free Download / Stream: alplus.io/falling-declan-dp
#gundam #asmr #zeta #asmrsounds #gunpla #bandai #speedbuild #modelkit

[@Nimadj]

Nice job! It's a thing of beauty

[@soseji]

The transform scene was great :)

[@HoraPlamo]

Whoaaa, such a cool model kit.

[@artan6966]

I bought this model and it is an awesome looking kit. The only issue I have with it, I still have to take it apart to transform it between modes.

[@knitehobby]

YEAA the transformation is annoyingly difficult, even in the video some of the parts aren't even connected, I just leave it hanging there

[@AndreaSacchi1978]

Agree... It's not as bad as the RG, but it's still hard to transform. Looks great though, Mr Katoki and Co did an awesome job here

[@larmp5500]

You did a great job as always man! no sprew bucket so imma have to give it a 9/10

[@knitehobby]

😅😅

[@btg9]

It looks great even without spraying paint!

[@knitehobby]

Yea the parts are very well color separated

[@Throwup413]

Awesome!🔥😤🔥

[@1252sandyplankton]

Jesus that’s awesome 🪽🔔👑🗡️🛡️

[@thedarkfloyd7517]

I tried spray painting the interior and so many pieces ended up breaking unfortunately. Same happened to my Sinanju so I combined the 2 kits to make a monstrosity! 😂

[@knitehobby]

I recommend not coating the frame unless you're using an airbrush and can mist coat, because coating makes the parts tighter. At least you got a cool kitbash 😁

[@gmexecutioner7766]

Hi, I also have this kit and plan on building it this month. Is it necessary to use a sanding stick for nub removal on this one or is a single bladed nipper enough?

[@knitehobby]

A single blade nipper is enough as long as you can get that perfect technique, but I think it will still show on the red, blue and black parts

[@gatikobrother]

I finally got the Zeta Ver Ka and after watching your videos I can't wait to build it. I just have s question, what was the clay like thing you pulled at 10:02? And what it is for

[@knitehobby]

It's thumbtacks, so the part won't move when I apply the decals

[@Kaio_Keint]

​@@knitehobby do you have a guide for water decal application

[@knitehobby]

@@Kaio_Keint I usually just cut out the decal, soak in water for 15 secs, apply Mr mark setter, slide it to parts, dry it, apply Mr mark softer, dry it again and 👍

[@jcenriquez_]

What's the camera you use? Also do you use a separate mic for a clearer audio?

[@knitehobby]

I actually just use my phone, planning to get a mic soon as well

[@kentrobertsuobiron8010]

How about the decals where did you get the white clear paint?

[@knitehobby]

It's MR.Hobby's mark setter and mark softer

[@roybarron7806]

Omg it transformes like a transformers toy that epic

[@knitehobby]

It's the hardest transformation I've ever done with a gunpla as well

[@GTSW1FT]

​@@knitehobbyand it's seemingly not a massive handgrenade like some masterpiece transformers

[@jazzching37]

👍👍

[@cedricphoo]

Impressive! May I know how long do you spend to build this gundam?

[@knitehobby]

I only have time to build on weekends, took me 4 weeks

[@Guyverman01]

Do you use a separate tool for removing the pieces from the runner and the excess plastic?

[@knitehobby]

Both nippers, but the second snip I use a single blade nipper for extra precision

[@Guyverman01]

Thanks for the tip! Btw, is a single-blade nipper the same as an exacto-blade?

[@amazondemon]

It's a bit more precise than an exacto knife plus you don't have the risk of taking of too much material

[@theothercelfox4278]

Whats the model of the cleanup nippers?

[@knitehobby]

DNR (DanurDoner), it's an Indonesian brand

[@theothercelfox4278]

@@knitehobby unfortunatly it cost more to ship the nippers than there price ,do u have any other recomendations

[@knitehobby]

Dspiae or manwah's nippers are good and affordable, planning to get one as well

[@kennythetrend3688]

How LONG did this take?!?!?! I just built my first RG in the Wing Gundam and that took me 7 hours...

[@knitehobby]

I only have time to build in weekends but I think around 9 hours? Excluding decals and panel line

[@grotesquecat]

does this use a lot of undergates?

[@knitehobby]

No, if I remember correctly it's only the white parts that are undergated which is pointless 😅 the rest I cleaned the nubs

[@ChrisTian-sd5yq]

only some from G runners

[@024514162]

😮😮😮😮😊😊😊❤❤❤

[@bronya7108]

Build yg bisa transform lagi bg

[@knitehobby]

Siappp

[@Ayamz9o]

Kit ni solid ?

[@knitehobby]

Solid, tapi kitnya berat jadi rasa engga seimbang

[@Ayamz9o]

@@knitehobby 👍🏻👍🏻👍🏻