My 10 Favourite Ways to Use an EQ Pedal

[@EversonBernardes]

EQ pre-distortion/overdrive is pretty powerful. It can totally change the character of the distortion: add more bass, it becomes looser and fuzzier; add mids and it becomes tighter and crunchier; add highs and the attack gets a gritty edge.

[@juanforrester2283]

Of course,also,fat od like od3>eq (Flat mids,lo-hi cut to taste)>hi gain od,distortion or amp(behringer tm300 tube modeler in my case) These is mighty tight and low noise. Any od with good low like od3 will do the trick,great for an ultra-chugg,never though it could work but geez,my amps are getting dusty.Salute.

[@Farvadude]

i'm surprised this video has 7% downvotes. there's usually only 2-3% downvotes at most unless the video title is misleading or the video fails to actually live up to the thumbnail. but this was exactly what i was looking for, and there's nobody commenting about what's supposedly wrong. i wonder why all those people downvoted

[@martinheath5947]

Genuine question How do you know how many downvotes a video gets since Google disabled the 👎 dislike button?

[@Farvadude]

@@martinheath5947 there's a chrome extension that brings them back. they're still visible in google's API--just not in the HTML code anymore without the extension.

[@MichaelBanfieldGuitar]

Hey, thanks for the support and kind words! It doesn't look like there are many downvotes on my end though, my KZbin analytics says 822 up and 5 down, that's less than 1%... Great to hear you found video useful.

[@Hugh_Jaynus_00]

🎉

[@xxnonstopdancingxx]

Some guitarists are arseholes

[@tlb2732]

I currently use two GE-7s on my pedalboard. One I use as a boost after all my gain pedals. The second I use as a boost before my gain pedals. I can gently tweak either pedal to overcome room resonances on some stages. Typically, the one before my gain pedals gets these adjustments more often than the other because the room resonance is more evident during solos with gain. Both are valuable tools to me because they are so versatile. I have used them to achieve certain signature tones for recognizeable songs to great effect. Some nights in some rooms I'll hit on a magical setting that is immediately noticed by the other band members and by the audience. Gigs where that happens can be a blast and can inspire the whole band resulting in a great show.

[@jimmyelectric]

What's your "magical setting" if you dont mind me asking? 😁

[@tlb2732]

@@jimmyelectric It depends on the acoustics of the room I'm playing in. Some rooms intensify certain frequencies while dampening others. This is due to the dimensions of the room and to reflective surfaces within it. My adjustments are made individually for each room, taking advantage of pleasing resonant tones, and minimizing unpleasant ones. There is no ONE magical setting that works everywhere. But there are nights when I hit upon settings that make my guitar sound pop. These experiences are what is magical.

[@jwal1992]

Great video! Not enough people talking about how great EQ is and how to use it. EQ is the most underrated effect pedal IMO

[@c.a.k.comedy692]

Same here bro you just get so much more control of how you dial in your tone

[@vincentl.9469]

@@c.a.k.comedy692 but does it matter if you use it in front of the amp or in the effects loop? in a loop , you EQ the pre amp section

[@Tipas17]

True! EQ and COMP is underrated IMO

[@officialpoa3171]

*EXACTLY!!!!!!! I have been saying it for years. I personally use a SOURCE AUDIO EQ 2 - dual channel EQ, that has a limiter, noise gate on both channels and are fully MIDI PRORAMABLE with presets CC and PC commands. I sit one channel in front of my amp and the other in the effects loop. I am able to dial so many tones with the click of a switch.*

[@chrisb3389]

Once I discovered the many uses of EQ, I bought the Source Audio EQ2 pedal. While it may be pricey, the options and flexibility make it equivalent to 3 pedals. I use it as a tuner pedal. It has a noise gate built in. As for the actual EQ, there are really 2 EQ channels that can be set in a variety of ways. You can run stereo with a different setting on each side, or you can do like I have done, where I have one EQ set pre-drives and another set post-drives. That way I get maximum flexibility without needing 2 physical EQ pedals on the board. With a separate tap switch, I can access 8 presets. If I went MIDI, there's way more than that. This video shows that there are so many uses for an EQ pedal, it makes programmable ones with presets make the most sense. I'd highly recommend.

[@vriendelijkegroet]

No 7! That makes the GE7 a must have for any gig. Get heard, not louder.

[@juanforrester2283]

Od3 and ge7 is a criminal combo,the order of placement adds even more options. Od3's slight bass surplus makes it so versatile for dialing precise bass cut with the eq,all the thump one could ever need. Salute

[@Shortcutguitlssns]

Immediately thought of Money for Nothing when you mentioned the Cocked Wah sound and Lo and Behold,you give us a similar version of it.!Great!

[@dharmanzer]

Fantastic and very educational video! EQ can do so much for a stale rig. I struggle to stay engaged with a lot of videos that have the info I’m looking for, find myself skipping around a lot. With your vids, right as I start to be ready for the next part, you move onto it for me 😂 the pace of how you do these really works for me, so thanks for sharing all your knowledge this way.

[@Mike-rw2nh]

A massive thank you. This channel is a treasure trove! Criminally undersubscribed too.

[@MichaelBanfieldGuitar]

That's very kind thank you!

[@matimoksa]

Love that radio speaker sound! I really think EQ pedal is a great way to get a lo-fi sound after watchig Rhett Shull video and you prove it right!

[@MichaelBanfieldGuitar]

Glad you enjoyed it. Yeah I like the radio speaker effect particularly for breakdown sections. Thanks for commenting

[@reverbautopsy9093]

Great video. You can get even more versatility by putting the EQ in the send/return which sounds completely different than just putting it in front of an map. I like track one guitar with the EQ in front of the amp and then another guitar with the EQ in the send/return. Between doing this, IRs, pedals and amp modeling there's an endless amount of tones you can get these days without spending much money.

[@FreedomIsntFree-gd2hg]

This pedal has been my secret weapon on a wide variety of tones and sounds. You’d be surprised how you can change your amp sound as well. These pedals are also great as a boost.

[@Grunfeld]

Good video. "It took me way too long to get around to buying an EQ pedal." Me too. It felt like EQ was "boring". It's actually really *useful*. A Swiss Army knife of a pedal. I wouldn't be without one.

[@-jank-willson]

ALL effects pedals should have at least 3 bands of EQ built into them

[@guitarlessonsnow3431]

@@-jank-willson all drive pedals, at any rate.

[@-jank-willson]

@@guitarlessonsnow3431 Did I misspeak?!?!

[@guitarlessonsnow3431]

@@-jank-willson no not at all, I just happen to think that drive pedals especially benefit from having a 3 band eq. Wasn’t trying to correct you.

[@-jank-willson]

@@guitarlessonsnow3431 it was a joke lmao. I think ALL pedals should have 3 bands of EQ, except for drive pedals. They should have sliders for 5 bands

[@DaleHodgkins0n]

Great video Michael! For years I used a Marshall JTM 30 amp with the clean channel all the way up as the warm overdrive was lovely, but with a single coil guitar it never quite broke up enough.... add an EQ pedal and the sound had a really great warm "crunch", without ever having to use overdrive pedals. EQ pedals are underated boxes - they definitely are not just for someone trying to emulate David Gilmour!

[@MrWumbologist]

This is a great video Michael; you make a really strong case for this being a true swiss army knife. I personally believe many channels downplay this pedal's usefulness, because how then could they sell you other gear?

[@ReedHarrison]

Im finding since i bought this its one of theee most useful and important pedals on any board.

[@davidwonpu353]

I can’t believe I waited so long to get this pedal and it’s all because of you Michael. You’re one of my favorite guitar people. Thank you!

[@markharwood7573]

Interesting stuff, especially the self-oscillating effect at the end. The only way I use an EQ pedal is to make an archtop with a floating pickup sound a little more like an acoustic by applying a fairly drastic scoop. I expect it makes a good rhythm/lead switch too.

[@-jank-willson]

My EQ has 7 bands. Band 1 i have it all the way at the bottom, band 2 all the way at the top, band 3 at the bottom, band 4 at the top, etc., and it sounds crazy!

[@JosephCompton66]

Another Grear lesson, you are not only a nice guitar player, you are a great teacher foo.

[@MichaelBanfieldGuitar]

Glad you think so, thank you!

[@michaelfowler3187]

Nice work Michael, I enjoy having an EQ after everything maybe even sitting on the amp for fine tuning, especially taking mud out to free up some headroom in the amp. I had a wmd parametric eq and most of what it did can be done with these slider style pedals but I wanted to bring up one that I don't think they can - and that's to actually set the hi frequency to the maximum, which on the wmd is well into the airy sounds sort of beyond our hearing, and the Q of that frequency as low as possible, and barely any level boost, just a touch of that "air" completely removes the blanket sound on my amp, it can be hard to get this just right as the harsher tones can come through but I found I could open up the treble of my sound and use the mid control to isolate harsh stuff that was well below the airy frequencies but still came along for the ride. That single move transformed the sound a lot and felt like high end rack gear, much more effective than cutting bass or notchy mids. Usually I wouldn't look to boosting to find clarity but if you have an EQ that reaches high enough you might find some magnificent sparkly cleans here. I think of it like way more headroom for the treble since most of the guitars voice is not occupying that range but can breathe more because of it.

[@johnm3946]

What an underrated pedal!

[@slates1969]

Fantastic. Why the hell has anyone downvoted this ???

[@doomerius1300]

Simple, people are fucked

[@sivertSt02]

Eq is my main effect on the pedal board, i use it all the time for changing up the sound

[@cpamiseso]

You have such good ears and brain! You can identify which frequency and eventually tweak to what you want to hear, this is pricelss indeed (this skills and musical talent). Bravo!

[@MichaelBanfieldGuitar]

Wow, thank you!

[@daviddraper6468]

Definitely biased by my love for older sounds but that drive tone without the EQ pedal was perfect for me, I thought that was with the pedal engaged for a second because it sounded so good. You just can’t beat that bite and clarity!

[@m.malina6797]

Call me weird, but all you really need is a cocked wah sound. No treadle needed. Great video! Any recommendations to learn how to use an EQ Pedal better is always appreciated!

[@dmitrymashkov9379]

one of the most interesting videos I've seen recently. Now I'm thinking about putting a second EQ pedal on my board =)

[@brentg80]

You deserve to be one of the most popular guitar channels

[@MichaelBanfieldGuitar]

That's very kind. Thank you!

[@benzakonium]

Great video - I've been saying for years to fellow guitarists to not waste money on trying this pickup and that, just get an EQ pedal and tweak for each guitar. Even get a programmable EQ pedal and have presets for each guitar to get it just how you like it. I have one two on my board, one at the start and one at the end.

[@StratsRUs]

Yet another superb video. I've recently fell in love with a RAT Deucetone again too. The 'Clean Rat' setting is great and the cascading is fantastic.I only mention it because I sort of expect you to love it. The RAT Deucetone deserves more coverage.With the Eq pedal , well, it is massive

[@MichaelBanfieldGuitar]

Yes I love RAT pedals! I used to use two cascading into each other when I was younger, Graham Coxon style. The Deucetone RAT looks like a similar concept but with even more options. I can only imagine that combined with an EQ pedal the options would be vast! Thanks for commenting.

[@philcunningham67]

Hey Michael this was really interesting & enlightening, I have 2 eq pedals stored away , now I’m going to put them on my pedal board & try out some ideas.. I particularly liked how you got different tones from the boss overdrive pedal since I have the same one.. really inspiring thanks so much for taking the time to put this together

[@BradyA1124]

Use an EQ pedal to re-voice overdrive, distortion, and fuzz pedals, emulate different pickups, use as a master volume and tone control, emulate a cocked wah and radio speaker, and get more from modulation pedals.

[@BedeLaplume]

Really interesting ..I found that boosting the mids improved the clarity or definition of the signals in many cases.. Especially with gain.. While lowering the mids actually helped definition with the chorus.. ​Also augmenting the bass on the bridge smoothened the piercing tone of the bridge on the Strat..

[@keolacam]

For sure

[@GavynTheGreat]

something cool that i like to do with eq is if your using amp distortion but you want to switch to a lighter more overdriven or even clean sound you can just bring down the volume on the eq, i find it super useful so i don’t have to use the knobs on the guitar or switch to the clean channel and then put an overdrive on

[@fallenshallrise]

Agreed. Reverse boost is an amazing trick for some high gain amps if they clean up nicely, instead of setting the amp for crunch and boosting it you set the amp for a great high gain tone then kick in a pedal that takes away some level and some low end for a thinner crunch tone.

[@7171jay]

The guys on Thatpedalshow (and probably some others) call this underdrive to contrast it with overdrive. If you don't want to use the volume knob on your guitar then underdrive can be quite useful and it offers even more control with an eq pedal because you of course have plenty of control over the tone when you ditch the gain/volume so you don't end up with just a quiet muddy tone.

[@bobaldo2339]

The best way I know to use an EQ pedal is between the output of an acoustic guitar's built-in pickup and the sound system (PA). An EQ pedal will allow you to eliminate the horrible "fried" unnatural treble sound of a piezo under-saddle PU, and make the guitar sound almost as good as it would have sounded directly into a microphone, without the damn pickup.

[@MichaelBanfieldGuitar]

Thanks for sharing this! I only occasionally gig with an acoustic and when I do, I use the DI out on an acoustic amp to feed the signal to the PA, which I find works well. But I can totally see your method of using a graphic EQ in between the acoustic guitar and PA working very well too. Especially if you don't want to lug an acoustic amp around or buy a separate dedicated acoustic guitar preamp pedal. Thanks for commenting!

[@H_Oscarsson]

Definitely going to try the Big Muff EQ thing. @2:55 thats the Josh Homme trick. He has one sitting on the amp and then drives everthing else through that.

[@guitarlessonsnow3431]

Great tips. EQ gives you lots of options.

[@bluwng]

You are a very practical and creative musician.

[@LarkVsOwl-de3op]

Great video. Besides this pedal satisfying my love of mids-manipulation, I love its boost even more.

[@islandpools9525]

This is a great video! The way you compared the sound with and without the EQ pedal is better than most other comparison videos I've seen. Most people add too many other variable or play chords with the pedal on and solos with it off, so you don't get a clear picture of how it sounds. Also, are you just adjusting the eq bands in the last segment or are you playing anything on the guitar as well?

[@luizdemarco99]

you really can do almost anything with an OD-3 and an equalizer, such underrated tools

[@MichaelBanfieldGuitar]

I agree. Wise words

[@user-mc9sg9fw3w]

Cool video. Just purchased my first EQ pedal :) Can’t wait to try some of these ideas out

[@hanten10]

Eq pedals prove that not even single od/ds or fuzz can stand by itself we always need to fine tune it with an eq to make it sounds more live and beautiful. btw I was using this boss eq for a few years and decided to quit because no matter if it's on or off it still affect your sounds when it still connected in your signal chain, well that is buffered pedal, maybe boss should upgrade it into a true by pass so the issue will be fixed.

[@matthew_thefallen]

I think I bought my first eq pedal when I started getting into pedals at the very start of learning guitar, it was my third pedal I got after distortion and reverb. I've always been an EQ guy. My motto is "More knobs, the better" 😅

[@bigbasil1908]

Can never get too many knobs (especially if you're a hooker 😛). In all my (ignorant) years of playing electric guitar I had never considered an equaliser pedal though I have just purchased a second hand GE 7 off of the fleabay.

[@MichaelBanfieldGuitar]

You're wiser than most it seems. It took me ages to come around to the idea of getting an EQ pedal, so useful though.

[@matthew_thefallen]

@@MichaelBanfieldGuitar I think my obsession with sounding like the people I was listening to was a big factor, instead of buying directly a 100 watt amp 😂

[@spivvo]

. 7:40 ha ha that’s much better than the Knoffler song you were alluding to !

[@Akasha92]

I use my 10 band EQ to clean up the crunch channel of my amp. I set the amp EQ for the clean channel but I don't like it for the crunch channel, so I use it as a separate EQ for the crunch channel to get rid of the mud without destroying my clean sound.

[@MichaelBanfieldGuitar]

That is a great idea! Thanks for sharing

[@danyb8078]

I’ve been using the GE-7 in my loop for lead boosts and bring the level up a bit when I turn down the volume to clean up. I also use one on my acoustic rig to boost solos above my rhythm loop. Great video!

[@bigbasil1908]

So can you use one of these pedals instead of a treble boost pedal? I'm probably asking a really fkn stupid question here lol. I was thinking of making my own treble boost pedal but maybe I don't need to bother (I've just ordered a second hand GE 7)

[@Ben2Squared]

@@bigbasil1908 yes you can. You can play with the output slider so you get that boost. Then just shape the tone by playing with the EQ bands to get your desired tone

[@Unusednickname_1970]

Every guitarist should have an EQ pedal. Very useful tool. I can’t use a Big Muff without an EQ pedal after it to boost midrange.

[@raymondleher7739]

When I bought my Roland JC 60 in the late 70s I I also got the Boss EQ to improve the sound of my not so good Angelica acoustic. Just bought chorus and this EQ pedal so that I can carry just guitar and pedals and plug into sound system wherever I go. Simples.

[@indifferentuniverse3991]

That was stupidly useful! I’ve never seriously wanted an EQ pedal until now.

[@Clinthopanonymous]

Everyone should have an EQ pedal! Hell, I think I might get Gran one for Christmas just in case she ever picks up a guitar.

[@martingalicia36695]

Good tip on adding that second patch cable!! The more you know!!

[@modernastronomers2596]

Number 3 is exactly what I needed to see!!

[@tonoselectricos]

And one beautiful application for the EQ Pedal: Transform your single pickup guitar into a dual pickup guitar 😅😅😂😂

[@JohnL1-o2f]

This is such a good channel, thanks Michael! By far the most inspiring guitar channel i've come across

[@StevenMorris]

I’ve been recording with an EQ pedal first on my chain lately with great success! I used to handle EQ ITB after recording but like the extra control with an EQ pedal up front

[@78tag]

I have a highly berated (vintage) pedal that does a lot this - it's called the Varitone switch on a 345. Still I'm sure much of what you are saying is still valid no matter what. Thanks, I'll be doing more experimenting after having watched this video. Thanks

[@humanbeing2420]

Wow - This is really informative. I love my GE-7 - I use it mostly as a volume boost and to boost highs and lows slightly, and in front of overdrive and distortion pedals to make them crunchier. I didn't know it had so many other applications.

[@MichaelBanfieldGuitar]

Great to hear!

[@anaxaplaysia]

Great idea to modify the distortion pedal's sound. I never thought of that.

[@leefradkin9077]

fantastic addition to your earlier two on this topic!

[@MichaelBanfieldGuitar]

Thank you! More to come

[@user-nf2wk9yx8z]

Thanks for another great video, Michael. It's always good to know how to get the most from the gear you already have, you prove a flanger and an EQ are severely underrated pedals. I'm surprised I don't often see them recommend for beginners and players who are new to pedals. Also, is that an AC4 with a 12" speaker in the shelf in the background? How do you like it?

[@Mr.D34]

Great video. I have two pedalboards and both of them have an eq pedal. One of the most important pedals ever made, they completely change the dynamics of your rig. Btw just subscribed 🙂 your videos are really great and you definitely deserve more subscribers.

[@ParaBellum2024]

I sold my GE-7 because the sliders introduced a hiss when moved more than half way up _or down._ There is a mod that overcomes this flaw, but the pedal wasn't getting much use. As usual, I see a video like this one and wish I still had it!

[@bigbasil1908]

Thanks. I've ordered one of these pedals (second hand) after seeing this video and I don't think I've made a compulsive purchase. I think it is a good investment to get a lot more out of the sounds of my other pedals and my amps. I did think about buying a 1985 GE 7 from japan but I saw that it uses an AC adapter and so I instead ordered a modern version which runs on 9v dc because its just a lot easier for me without having to mess about with multiple adapters lol. I could have bought a cheaper equaliser pedal for £28 (rather than the £80 for the Boss) but in my experience you can't really go wrong with a Boss (my Boss pedals have not failed so far and I've had them since the mid 90's).

[@MichaelBanfieldGuitar]

Good to hear this was helpful. Yeah the Boss stuff is just industry standard equipment in my view. Hope it works well for you.

[@Pizzadoboz]

Pretty sure this channel will blow up in time.

[@otraperspectiva]

Really cool, I need to get more experimental with my use of EQ. Now even thinking about getting two for my setup

[@timothyoo7]

Loved that first tone!!!

[@pedrojintan7407]

I like to use 5/6 band eq with flanger as "chorus" to simulate the rotary speaker (How To Get 6 Modulation Effects From a Basic Flanger Pedal Like The Boss BF-2) to boost the lows and some highs.

[@ianross3353]

I both love and hate your channel. I love it because you show how to get unbelievably good use out of certain pedals, but I hate it because now I feel like I don't have an excuse to buy shiny new pedals and guitars.

[@christopherdunn974]

Excellent video! I recently placed a GE-7 after my DS-1. Between the GE-7 and the all of the gain/tone control sensitivity on the DS-1 you can acvhieve so many sounds. Also I'm super jealous of your clean CE-2 and DM-2 pedals Lol.

[@MichaelBanfieldGuitar]

I must try that! It'd be fun to use an EQ pedal to push such a classic distortion pedal to the limit of what it can do.

[@cmet8280]

Did I miss using as a boost, keep the EQ flat and boost the volume to drive the amp a little harder.

[@MichaelBanfieldGuitar]

Well spotted! Yes I should have included that, I was a bit more focused on using the EQ element in this video. Simple volume boost pedals could maybe be a whole other video. But yes, it's worth saying that EQ pedals can pretty much do everything that a basic clean boost can do too. Thanks for commenting!

[@monkeyrebirth]

Ahhh EQ - the most useful, yet least sexy pedal. I'm sure the Boss EQ pedal colour doesn't help! After I saw the light I put an EQ before and after my drives. Great ideas and video as always.

[@benjohnson7170]

Watched this last night after hearing the words "should've got one ages ago". I bought a cheap pedal today. I'd been thinking about it for a while and am bored with my sound. Cheers

[@dt9r]

nice video and most of all nice Jag !

[@MichaelBanfieldGuitar]

Thank you! Yeah I definitely want to use that Jaguar in some more videos soon

[@dt9r]

LPB with rosewood fretboard and white pickguard is, in my opinion, the best color combination for strat, tele ,jm and jag, and I'm partial to offset guitars :)

[@richardellis8808]

Wow, great tutorial, Michael. I'm a late comer to EQ and Compression, but I am catching up fast.

[@MyUrbanExplorationOnline]

For e I use a Vox AC30 had with a Marshall MG412A 120-watt 4x12 cab as guitar and a bass rig. When I use it as a bass rig, I use an EQ in the effects loop with a noise gate .

[@el0blaino]

Wow really helpful video, Michael. Thanks heaps!

[@RICO_SUAVE21]

Awesome demonstration!!! I’ve been thinking about picking up a GE-7. Was your noisey when you engaged it especially with your drive pedals??

[@MichaelBanfieldGuitar]

Yes is does add some noise, it can be annoying but it's only noticeable when I'm not playing. This is an old GE-7 and I'm not sure if the new ones are any better. I know there are mods available for the GE-7 but if you don't want to go that route I'd consider the MXR EQ pedals next. I've got some links to my favourite EQ pedals in the description. Hope that helps.

[@36on22]

@@MichaelBanfieldGuitar Agree. I have the MXR 10 band EQ and it is very quiet.

[@BlazertronGames]

I'm thinking of buying a ge7. Some people stack overdrives, but I was thinking that I could probably simulate that by just sending an eq into an overdrive, as a shaped boost, similar to how people use a tubescreamer with the drive down as a boost to tighten up the sound.

[@doremi5793]

Great video, super helpful !!! Beautiful Jaguar! I've always been intrigued by fender offset models, but I have stuck to strats and teles so far. Would love to see more of that guitar in your upcoming videos!

[@MichaelBanfieldGuitar]

Yeah, it really needs a good setup but yes you've convinced me to move that job up on my to do list, I'd love to use that Jaguar more often in videos. Thanks for commenting!

[@Hugh_Jaynus_00]

Will definitely check out more of your vids.

[@laotzu4340]

What an excellent video. Thank you, you've given me some really good ideas on how to revoice my overdrives and fuzzes to taste - I may have just saved a pile of cash that would've been spent on new dirt boxes!

[@MichaelBanfieldGuitar]

Great to hear! Glad to help

[@leetintary2074]

The Boss GE7 was an early component of Kevin Shields signal chain.

[@kane6529]

They have a MIDI programmable EQ pedal I’ve always thought that would be awesome like presets

[@MichaelBanfieldGuitar]

Yeah I've had my eye on the Boss EQ-200 for a while now. I think if you're using the EQ pedal for a lot of different tasks and at live shows, then a programmable EQ with presets is going to be very useful. An graphic EQ pedal is probably the pedal that takes the longest of all pedals to change your settings.

[@johnnybigsplace7767]

Really great video. Thanks for the advice

[@tylerpinder1]

Loving this channel 🎸

[@kwgm8578]

Yes, these are all interesting. Thank you. At one time I considered using an EQ pedal to compensate for the underwhelming pickups of a Vintera guitar that supposedly is like a 70's Fender reproduction? Don't you believe it! They don't come close. Then I realized -- if I don't like the pickups, replace them. Or the entire instrument!

[@ferraridinoman]

Must admit only used one of these on the Monitors amp live on stage! Could get the maximum volume out of the monitors with using the EQ to eradicate the "problem" frequency!

[@MichaelBanfieldGuitar]

Cool idea I'd never thought of using one for that. Thanks for commenting!

[@skywb]

great video and great playing homie

[@capitanvonchickenpants8492]

Good for turning single coils into humbuckers, if you have a ge7 (noisy) get a caline ten band (quiet) the bands are different so you get 17

[@godbyone]

The. Analog man mod is awesome

[@petedazer3381]

Very helpful! Thanks

[@ryanloescher6234]

Had to revisit this today because I saw some loon in a comment section somewhere arguing with everyone that an EQ pedal can't do half the things it's useful for. My personal favorite being the diatribe they went on about EQs not being able to match the magnetic frequency differences between a bridge pickup and a neck pickup. You also apparently can't use one to make a humbucker sound hotter. That obviously comes from the pick. I really have no idea where these guitarists get this nonsense

[@evanmatthiesen7478]

I like to use a lot of feedback in my stuff, and using this pedal is awesome for that- you can basically "play" feedback similar to the way you are using it in example 10

[@MichaelBanfieldGuitar]

Ah, kinda like the feedback/Booster FB-2? I hadn't thought of that! Thanks for sharing

[@esposoman]

Thanks for that video. Very interesting and useful.

[@replicated]

When I watched this, I camed and started farding.

[@MrNeurotix]

great video once again :) especially that last bit, reminded me of Radiohead a bit. I wonder if you could do a video comparing the 'normal' graphic eq with a parametric eq, or try to emulate the sound of an HM-2 with a MT-2 and an eq. anyway, always looking forward to your new video's. tnx!!

[@MichaelBanfieldGuitar]

Yeah good suggestions, maybe comparing pros and cons of the three main type of EQ pedal... standard three band, graphic EQ and parametric EQ. I think they all have their place for certain situations. I'll put it on the list!

[@Lucas-lh8kg]

I actually think the Od3 with the EQ pedal sounds more interesting than the tube screamer