Nano waterfall 304 stainless Steel sink install.

Рет қаралды 42,157

Күн бұрын

Пікірлер: 38

@mgyoung777 8 ай бұрын

Great Video! Much better instructions than anything provided by these all in one sink companies. Would it be possible to give a little more detail on the drainage install, even a picture of what it looks like fully connected. I have never used this flexible drain hose and could use some direction. Thank you.

@mickyas1000 8 ай бұрын

Thank you. 😊😊 the drainage is a strange one, as it's much larger than anything we use in the UK, so the only way I could think of fitting it was to connect all the fittings together (they'll only go together one way so just take a few minutes to familiarise yourself with them), then use a 40mm compression fitting on the end of it, this is then connected to standard 40mm waste pipe, but make sure the outlet is below the grey flexi waste trap. Hope that helps.

@blerinlyka3588 5 ай бұрын

best description so far thank you.

@mickyas1000 4 ай бұрын

Thank you. 😊

@munirak5524 5 ай бұрын

Hi! Great video and thanks for taking time to explain each feature. Can you explain a possible reason why the main faucet can have full pressure but the waterfall outlet has water flow just a tiny bit and stop. Im trying hard to search for videos and solutions online but can't seem to find a solution. Will explain to my plumber once you reply.

@mickyas1000 5 ай бұрын

Hi, thanks for that, in all honesty I've no idea why you would have differing pressures for the faucet and waterfall, I had similar with the faucet and the glass washer, which lost all pressure, so all I can assume is there's poor quality fittings used on the internal diverters, can't say for certain without fully dismantling. Could have something to do with your mains water pressure or you could have your flow slightly reduced at the stop cock. Sorry I couldn't be more definitive, but should give you a bit of info. Thanks for watching.

@munirak5524 5 ай бұрын

@@mickyas1000 thanks!! My plumber was able to fix the water pipes that connected to the faucets a day ago, including the waterfall line.. so the issue is resolved.

@mickyas1000 5 ай бұрын

@@munirak5524did he say what the problem was, might help others if they come across the same issue?

@munirak5524 4 ай бұрын

@@mickyas1000 hey!! Sorry for the delayed response.. yes, he mentioned that he had fixed the 3 pipes incorrectly to main faucet which caused the low flow in the waterfall section side..

@mickyas1000 4 ай бұрын

@@munirak5524yeah, there's no clear indication as to which way round the pipes go into the fitting.

@marcelastokoe7792 9 ай бұрын

Very good video

@mickyas1000 9 ай бұрын

Thank you.😊

@phlee1969 4 ай бұрын

Great description, do the wastes have a spigot for washing machine ? Cheers 👍🏼

@mickyas1000 3 ай бұрын

Thanks you. I don't think any of these come with a washing machine connection.

@marknlilly 2 ай бұрын

I like the video, but how do you fasten it to the countertop?

@mickyas1000 Ай бұрын

You don't need to fasten it to the counter top other than a bead of silicon, as this sink is extremely flat and made of thick stainless steel, so no flexing like the 'pressed' sinks.

@Sickiey Ай бұрын

Nice Video,, cheers

@mickyas1000 Ай бұрын

Thank you. 😊

@bijivarkey6977 4 ай бұрын

I have a black nano kitchen sink, cold water is coming in good pressure but hot water pressure is too low. Also hot water is not coming , I turned off cold water then hot water is coming but very low pressure. Also the digital display is not working. Knob for hot and cold water is too tight and noisy. Could you please give me an answer, I am really disappointed

@mickyas1000 3 ай бұрын

Thanks for watching, unfortunately I can't help you with the reason you're experiencing differing pressures, it could be any one of a number of things, from water quality to boiler set up.

@EmrysHyperion 9 ай бұрын

how do you connect the water filter?

@mickyas1000 8 ай бұрын

The water filter is quite simple, if you buy filters like these... amzn.eu/d/cj07T2K this is a kit which includes a reducer (1/2"bsp to 6mm) needed to go from a John Guest 15mm male coupler (after the emergency shut off i mention in the video) so going from the 15mm water supply - attach the reducer, then you connect the 6mm pipe to it which you then connect to the bottom of the filter (insert the holding clips to prevent it coming out), then take a length of 6mm pipe from the top of the filter to the base of the tap (shown in the video), BUT just before you make the final connection to the tap, put the end of the 6mm pipe into a bucket and turn on the water supply and leave it to run till you fill the bucket, this flushes some of the loose excess carbon particulates from the filter. Hope that helps. 😊

@mesc161 8 ай бұрын

@@mickyas1000 IM LOST!! so i need to buy those filter connect it under and at the other end put the water ?

@mickyas1000 8 ай бұрын

@@mesc161yes, the sink has a dedicated filtered water tap (2.07 in the video). Once you have the filter cartridge, you connect the cold mains water in the bottom (using 6mm pipe) and then take the 6mm pipe our the top into the dedicated tap.

@DaniDani-xz8us 7 ай бұрын

I already have a round faucet, but my faucet is broken. My faucet when turned is loose. do you know how to fix it?. please answer I'm frustrated with my faucet.

@lisasmith7777 3 ай бұрын

I have this sink & leaking 😢😢 from the bottom any idea what do do

@JimohSalimon Ай бұрын

Why the small tap does not connected

@mickyas1000 Ай бұрын

Sorry, I'm not sure what you mean? If you mean 'why isn't the small black tap connected', I explain in the video, this is a water filter tap and gets connected separately.

@nikamelia8715 8 ай бұрын

Hi, I was building a model like this (one without the second sink and with bottle of soap) and my sink did not come with the water distributor, one for cup washer. Did you buy those or should I get those myself.

@mickyas1000 7 ай бұрын

Hi, sorry for late response, just back from holidays. There are numerous variations of this sink, some come with soap dispenser, some with water filter and some with cup washer, it all depends on what you ordered as it will come with all relevant fittings, if you want to change one for another you might need to alter/purchase additional fittings.

@DaniDani-xz8us 7 ай бұрын

I already have a round faucet, but my faucet is broken. My faucet when turned is loose. do you know how to fix it?. please answer I'm frustrated with my faucet

@mickyas1000 7 ай бұрын

Hi, I've heard from other buyers that their faucet has broken internally, as it apparently comes with very cheap plastic inserts in the body. If the top vertical part is loose try using an alan key to tighten the small grub screw on the back of the faucet, if the whole faucet is loose, you'll need to tighten the back nut, if that doesn't work, then it would appear your faucet is damaged.

@DaniDani-xz8us 7 ай бұрын

@@mickyas1000 Thank you for replying to my comment. My faucet fell out of place. Do you have Instagram or other social media? so I can send you a picture of my faucet. If you dont mind

@DaniDani-xz8us 7 ай бұрын

@@mickyas1000 when using my faucet, I turned it very hard and then my faucet came out of place

@mickyas1000 7 ай бұрын

@@DaniDani-xz8uswithout seeing what you mean, it sounds like you've snapped the internals.