MicroBeast Tail problems solved - XL Power 520 Torque precompensation

Tail servo , Align DS535 Mini Metal Geared Digital Tail Servo HSD53502T
Align 90mm Carbon Fiber Tail Blade HQ0900C
Cyclic, Align DS530 Mini Digital Servo HSD53002T X 3
MICROBEAST Plus Flybarless - V5.0
Single DSMX Satellite
XLPower 4020 Brushless Motor
HOBBYWING platinum 120A V4 ESC
Overlander 3350mAh 22.2V 6S 35C Supersport Pro LiPo Battery
Pitch Curve Nor, 42% 46% 50% 75% 100%
Idle 1 82% 82% 82% 82% 82%
Gyro Gain 33% - wrong precompensation
Gyro Gain 40% - correct precompensation
Pitch, -12 +12
1.HPS (High Precision Head System), New head with 2-piece blade grip preserves grips in the event of a crash.
2.To improve the strength and durability of the 10mm high strength steel main shaft,8mm high strength steel spindle shaft,M5 YFS high strength spindle shaft screw. New head with 2-piece.Blade and support 3-4mm aperture,rotor blades compatible size 430mm 470mm 480mm 500mm 515mm 520mm.
3.Brand new CNC metal reinforcement plate effectively increase the torsional strength of main frame, under extreme 3D maneuver, you can strongly feel its solid reinforcement from its structure.
4.Swash-plate servos support medium-sizes servo,the XLPOWER520 lightweight design is 1800g,without battery this effectively increase the power and improves flight time,Tail servo support medium-sizes servos and standard servo，motor support 4020 or 4025.1100KV for 6s,550kv for 12s.Li-Po support 6S 3000Mah-5200mAh.Battery slot H 55mm*W 48mm*L150mm.ESC support 80A-120A.
5.The canopy manufactured with durable lightweight fiber material, the Landing skid is tilted 2.5 degree forward which improves crash worthiness.
SPECIFICATIONS:
Lenght: 981mm
Height: 120mm
Width: 310mm
Main blade size: 425mm - 520mm
Tail blade size: 72mm - 86mm
Motor pinion: 12t included;13t optional
Helical CNC Main gear: 106t
Tail pinion: 13T
Autorotation gear: 60T
Main to tail gear ratio: 4.615
RTF weight: 2400g-2700g
Main shaft diameter: 10mm
Feathering shaft diameter: 8mm
Tail boom diamater: 20mm
Max battery size: 150mm*48mm*55mm(6s)
Includes:
(1) XLPower 520Kit
(1) XLPower 4020 Brushless Motor
(1)HOBBYWING platinum 120A V4 ESC
(1) Set of RotorTech Blades 520mm Rotor Blades
(1) Set of XLPower80mm Carbon Tail Rotor Blades
(1) Foam Blade Holder
Needed to Complete:
Transmitter (7-channel or more, helicopter system)
Receiver (7-channel or more)
(1) 6S Li-Po 3000 ~ 5200mAh
(1) Digital Pitch Gauge
(3) Mini Size Cyclic Servos
(1) Full Size Tail Servo
Misc. Building Equipment

[@33gate1]

This is not a bad little heli, now that the tail is sorted i'm enjoying this one :)

[@K15997-Heli]

Heck yeah man looks great! Enjoy! Pumped to see more

[@33gate1]

Thanks :)

[@blackpanter12345678]

Nice heli there :) You have becomed very good. Im back in this hobby again after a break on over a year :)

[@v4zzy219]

Woo hoo!! I'm glad everything is squared away!! She's holding that tail like a church girl!!!

[@33gate1]

Thanks for your message yesterday about the precomp, i only checked after you asked about it 👍🏻👍🏻👍🏻

[@arcturus8218]

it was the torque round the wrong way lol./well done looks good now

[@33gate1]

Tail is much better now 👍🏻

[@arcturus8218]

having trouble with my tale now ,when u set up the torque compensation did u plug your giro into computer or just the parimeter seting on giro cos i tried just the settin on giro and dont get hardly any compensation compared to what you just showed, cheers

[@33gate1]

All set up done with the MicroBeast, no PC or Laptop, hope you get it sorted.

[@arcturus8218]

@@33gate1 sorted it . i had to much pitch i had 13 degrees positive and 15 negative so it made it to torquey , i redone with 10 degrees and upted the trottle and it is now great, goin to keep it now lol its a trex 300 x by the way.

[@33gate1]

@@arcturus8218 Nice one, i always make sure i get -12 at negative, a pefect 0 at mid stick and +12 at positive. Here is a video i made when i got this set up perfect :) kzbin.info/www/bejne/iaPZnZaVZZVrn8U

[@arcturus8218]

@@33gate1 i usually go for about 12 degrees but ive been gettin lazy on the setup lol, and this trex 300 has a week head on it the dfc links hav broke a few times think im done with this heli which is a shame cos the rest of it is ok