Microcontroller IO Ports Circuit | Port Transistor Circuit | Read to Ports

I/O Ports Po,P1,P2 Circuit details
I/O ports and circuits
Each port of 8051 has bidirectional capability. Port 0 is called 'true bidirectional port' as it floats (tristated) when configured as input. Port-1, 2, 3 are called 'quasi bidirectional port'. Port-0 Pin Structure Port -0 has 8 pins (P0.0-P0.7)
Port-0 can be configured as a normal bidirectional I/O port or it can be used for address/data interfacing for accessing external memory. When control is '1', the port is used for address/data interfacing. When the control is '0', the port can be used as a normal bidirectional I/O port.
Let us assume that control is '0'. When the port is used as an input port, '1' is written to the latch. In this situation both the output MOSFETs are 'off'. Hence the output pin floats. This high impedance pin can be pulled up or low by an external source. When the port is used as an output port, a '1' written to the latch again turns 'off' both the output MOSFETs and causes the output pin to float. An external pull-up is required to output a '1'. But when '0' is written to the latch, the pin is pulled down by the lower MOSFET. Hence the output becomes zero.
When the control is '1', address/data bus controls the output driver MOSFETs. If the address/data bus (internal) is '0', the upper MOSFET is 'off' and the lower MOSFET is 'on'. The output becomes '0'. If the address/data bus is '1', the upper transistor is 'on' and the lower transistor is 'off'. Hence the output is '1'. Hence for normal address/data interfacing (for external memory access) no pull-up resistors are required.
Port-0 latch is written to with 1's when used for external memory access.
Thank You For Watching

[@jagdishannepu7179]

I couldn't understand malyalam, but got what I wanted. Thank you Sir!

[@vigneshk1401]

Super sir ✨ Thank you for your teaching And Assembler and type of assembler explain video upload sir ....pls

[@taksh4227]

Sir what is GRID bias..have you talked about this any of your videos. please reply sir.

[@techforallneeds]

very good sir

[@CSESarathBalaji]

Sir I'm CSE student but I'm also interested in electronics, please suggest me some books from the basic to intermediate....

[@electronicsexplanationvide3180]

Dear sir put a video for two watt meter method

[@sivaguruv7567]

Power system subject start panunga sir

[@dhayaprakasha344]

Sir..Neriya video upload pannunga

[@tanirakesh6901]

Guru please try to tell in telugu