Midi Heki Rooflight Install | Ep12 | Sprinter Camper Van Conversion

Midi Heki Rooflight Install | Ep12 | Sprinter Camper Van Conversion
Midi Heki Rooflight installation. The biggest roof light that will fit in a sprinter roof 700x500mm.
I hope this helps you with your conversion.
-----------------------
Our Links - We appreciate the support
Buy us a Coffee - www.buymeacoffee.com/ScottandJen
Patreon - / scottandjen
Instagram - / jen.scott_vanlife
KZbin - Scott & Jen - / @scottandjen
-----------------------
#scott&jen #campervan #conversion #sprinter #sprinterconversion #sprintervanconversion #sprintercampervan #diyvanbuild #vanbuild #vanlife #vanlifeuk #travelcouple #tinyhome #tinyhomebuild #homeiswhereyouparkit #tinyhomeonwheels #midihekiinstall #midiheki

[@ScottAndJen]

VERY IMPORTANT note about this video - you are awesome, dont let anyone tell you any different. Oh, and have a terrific day

[@juliawhenthegirlsrule7937]

Hey Scott! Thank you so much for teaching this 53 year old lady (with no building skills!) how to put a skylight in her van. I did it yesterday and had your video guiding me on my computer in the van with me. I'm achey and exhausted but I did it and it rained all night last night and it is not leaking. I will say, I did have a nightmare about hitting my head like you did. Thanks for being my guide. Take care!

[@ScottAndJen]

Glad to hear it Julia. Good luck with the rest of the build

[@lindadunlavey]

So how do you like your skylight? Did you get the same one that he put in? The reason I'm asking is I just bought a Ram pro master 3500 I'm shopping right now for a skylight I wanted a big 1 that I could use as an escape if I needed to plus it gives so much light. I was also impressed, you said you are 53 and DIYing your van. I am 64 and questioning myself!!! Would love to hear and see from you if interested in sharing your experiences so far? And help or suggestions welcome!!!

[@Crusty_Camper]

I used the same sealants as you when I put my skylight in my van last year but found a problem last week when it started to leak. You probably already know this but the manufacturers use a release agent when casting the skylight frames and neither silicon sealant nor Sikaflex adhere to it. I just took out the screws and with hand pressure, the whole skylight lifted easily with the frame completely clean. It needed washing with soapy water, vinegar and white spirit to remove the release agent, then it went back on with a good seal this time. All the best, Pete

[@fiachra77figs]

What good sealant did you use?

[@Crusty_Camper]

@@fiachra77figs Hi, Sikaflex 512.

[@ScottAndJen]

Hi Pete I did not know this however it seems abit counter intuitive to the fitment of the unit so I would be surprised if this is a standard for all skylights? There was nothing mentioned in the info sent with the rooflight but thanks for the info. So far no troubles with ours so will see how it fairs. In addition anyone looking to use this rooflight and/or video might be worth getting in touch with the manufacturer and posting back here for future watchers. Either that or air on the side of caution and use white spirit regardless

[@bergfpv6486]

I plan to use hindsight from the beginning when I build my campervan. It'll save me a bunch of time. Lol

[@deanraddick9041]

Thanks for sharing, seems your the only ones who shared a install of a 700mm x 500mm skylight, looks great!!! And successful grin at the end sealed the deal!! 🤣🤣

[@mattcameron9349]

Thanks so much for posting this, I’m looking to fit exactly the same rooflight into a 2011 Transit Connect on my next days off. I would never have thought of making relief-cuts and crimp the metal. I was going to cut ‘pucks’ out of an acrylic chopping-board, to fill the gaps!

[@ScottAndJen]

Glad it helped you out Matt. I'm sure there are multiple ways to install. Hope yours goes well😎

[@jackspatch14]

Doing mine today. This video was a ton of help. Shitting myself about putting a hole in the van

[@ScottAndJen]

Good luck. It's not too bad

[@cloudcity_brandon4913]

Thanks so much! I feel much more confident installing mine. Note: video is better at 1.5X speed

[@ScottAndJen]

Glad it's of help. Slow down enjoy the process🤙

[@DavyBhoy12G]

Nice video Scott. I've been looking for this type of skylight for our van build. To find it with this video was perfect. I thought the relief cuts was a good touch. Very neat.

[@ScottAndJen]

Thanks David

[@karsten112]

Hello you both, i installed my Midi Heki today, thanks for your Video. I never thought that the 500 x 700 fits, but after your Video i tried. Thanks for that...

[@ScottAndJen]

Glad it helped you out enjoy your rooflight😀

[@marks-0-0]

Nice video production guys. Informative and entertaining 👍

[@micathasteings]

Good luck guys im starting mine soon as the weather improves,

[@ScottAndJen]

Good luck with the build :D

[@michaell8835]

Really enjoying watching your build Scott & Jen, nice to see Jen putting in appearance this time, you pair are so cute! Keep up with the videos, hope you've got lots more planned over the coming months. I have just started my own build, so excited about it, and videos like yours are making the whole thing seem achievable (sometimes feels very daunting).

[@ScottAndJen]

Thanks for the support Michael. Glad the videos are helping you out, there will be plenty more videos coming. Its getting cold here now in the UK though. Hope your conversion is going well. I think people underestimate the work that goes into a conversion. Just do a little bit at a time and dont sicken yourself :)

[@michaell8835]

Scott & Jen Yep, definitely cold out now, although I’m hoping to get a good amount of workshop time over the Christmas break. So far I’ve mainly been planning and measuring, having only got my van a couple of weeks ago. I’ll be installing a MaxxFan same as you, so your video was really helpful. Yes, definitely agree, a huge amount of work and I’m only at the planning stage! I’m looking forward to getting properly going with the build. Can’t wait to see your future content. Thanks again both.

[@neilramnath7]

Great job guys, keep it up.. I look forward for more from you guys thanks....👍👌👏

[@ScottAndJen]

Thanks Neil the support is appreciated :D

[@UnstoppableTramp]

SO glad to find your channel mate, my Wife and I are planning a sprinter build after having enough of living in bricks and mortar. We did do a year in Ibiza in a swb transit a few years back and cant wait to get back to it, but this time in a much bigger and better van!! Looks like you did a very professional job there mate, well done.

[@ScottAndJen]

Thanks man. Getting the rest of the vids on the channel over the coming weeks. Good luck on your build, just dont take it lightly (its alot of work)

[@UnstoppableTramp]

@@ScottAndJen Thanks mate we wont, you in the trades then I take it?

[@ScottAndJen]

Commerical diver by trade. Makes no odds, a novice can do a van build if they have the time and patience

[@xtowerboyx]

Thanks for sharing this video as I have just fitted the same roof and your video was a big help cheers

[@ScottAndJen]

Glad it help enjoy the roof light

[@FnAVanLife]

We're doing this tomorrow!! Thanks for the tips!

[@ScottAndJen]

Glad to help

[@jasonace5904]

Great video mate I'm fitting one soon massive help cheers for that 👍

[@ScottAndJen]

No problem Jason. Cheers

[@whateverthisis3929]

Very helpful

[@paulblake930]

Just wondering what the size of the metal clips are I need to get some but unsure the length?

[@branchsnapper2228]

Great advice thanks

[@Jovis8888]

Thank you for this.

[@ScottAndJen]

Pleasure

[@ArmeandViki]

Hey, got a question, did it leak afterwards, would you do the same sealing again?

[@tylerswing921]

Great video, I’m struggling with the installation of an ac unit because of the ribs on top of the car. The sealing gasket won’t seal over the ribs. Looks like it’s possible to flatten them. Might give that a try. Can you flatten 30 cm or ist that a bad idea because of rust?

[@ScottAndJen]

Hi Tyler I couldnt really comprehend what you mean unless I saw a picture. I have heard people mention cutting the metal can weaken the roof's structure but I cant really see it being a problem. Also if rust is the issue just clean the area well of any existing rust and give the bare metal areas created by the cuts you make a good coating of anti rust paint. I assume the cuts will be covered with the A.C. unit anyway so if your mastic/sikaflex application is good then water should not get to the area to create rust in the first place.

[@joshxtu29]

Hi!! Lovely installation! If you were there again, will you cut once again the metal for clipping down those 20mm mountain?

[@tewkesburypastandpresent9555]

Thanks folks, great video and very helpful hints. Can you tell me where you found this Heki please, I would like to put one in my build, cheers.

[@svenundnadja4914]

thanks for the video. Is the window still watertight due to the cut in the body of the car?

[@ScottAndJen]

Hi there. Yes the cuts are inside the external bead so makes no difference

[@TheHumanSoundSystem]

Did you use the standard spacer fixing kit that came with the window? I also have a sprinter and wanted to know if i need to buy a larger or smaller kit. thanks a lot

[@ScottAndJen]

Hi im not sure what you mean about the spacer fixing kit but im assuming you mean the metal brackets the internal cover clips into. Anyhow the kit I fitted was completely standard. Good luck

[@Campingglueck]

Good job.

[@ScottAndJen]

Thanks!

[@marks-0-0]

Can I also recommend looking up Greg Virgoe and The Restoration Couple van builds if you haven't already. I've learnt alot from them ☺

[@aidanroberts8677]

Hey! Thanks v much for the video! Am I right in saying you simply used the standard installation clips provided with the skylight then used longer screws to bridge the gap?

[@ScottAndJen]

Correct

[@ramonaveit2056]

Dear both, thanks for the great helpful video! For one question I couldn’t find any answer so far, so hoping for your support! Is it possible to climb onto the roof of the van through the Heki midi considering your statue and the limited opening angle (~50-70 Degree I guess!?) Thanks a lot!!

[@ScottAndJen]

Hi yes it is possible

Buen vídeo 👌 gracias.

[@ScottAndJen]

De Nada

[@Ruthie888]

Looks really great. I've tried to find windows like this in the US, but they're much smaller. Any ideas?

[@ScottAndJen]

Sorry Ruth you are on your own there. You can post internationally but itll cost you. I would think the US would have alot more choice

[@sams0blu]

hi there, i'm wondering if you can hop out of the skylight onto the roof, or is it too small of an opening? Does the hatch lid open wide enough? I'm looking to install a similar one. thanks!

[@ScottAndJen]

Yes you can

[@sams0blu]

@@ScottAndJen great, thanks : )

[@KoreanPatch]

Really clear and I like how you showed all the steps. Thanks for making this! Have you noticed a lot of heat entering or escaping through the skylights? And did those clips you attached to the wooden frame come with the light when you bought it or did you purchase them separately?

[@ScottAndJen]

Everything in the video came with the kit. re heat loss, when we were in the Alps in the winter it was letting alot of heat out. I taped two pieces of silver foil bubble wrap insulation together that fitted snug between the window and the blackout blind and the negated the loss almost completely. Good luck

[@KoreanPatch]

@@ScottAndJen thank you!

[@nickyearl2866]

Hey, thanks for this video. Where did you get the clips from?? Having the same trouble and would love to get those

[@ScottAndJen]

Hi Nicky, not exactly sure which clips you mean. The ones I put the long screws into come with the Rooflight kit

[@chocofudgecake]

Hi Scott and Jen, great video thanks for posting! Did you ever have any leaks? I've had a few people tell me that sprinters are prone to leaks with roof vents and sky lights. Thinking about giving this a go on my sprinter but a bit hesitant

[@ScottAndJen]

Had a leak on a on of the roof grommets that wasn't used. Had worked itself loose, we may have disturbed it whilst insulating. No leaks for any other work ie solar panels, fan or roof light. Good Luck

[@chocofudgecake]

@@ScottAndJen ok great thanks for your reply!

[@laurenbuxton2145]

Hi, where did you get the one with the curtain from please?

[@ScottAndJen]

Grasshopper Leisure online

[@erikaamac2727]

Do you know anyone with a Promaster 159 wb. Do you think this should work on mine?

[@ScottAndJen]

Hi Erika. I'm assuming the Promaster 159 is a caravan. I don't have any knowledge of this I'm afraid but aslong as you have and area big enough to fit 700x500mm + 20/30mm extra for the frame inside then you will be good to go but make sure you measure up well before you start cutting. Good luck

[@pococteam]

Placing the skylight that opens forward would be dangerous? It is to be able to clean the solar panels thanks for the video

[@ScottAndJen]

Sorry can you clarify what you question is?

[@aboutandes]

We bought the same window yesterday and the guy we bought it from told us it can blow off while driving when it opens to the front.. sounds logic... :(

[@ScottAndJen]

@@aboutandes yes that is correct you want to fit the window like we have on this video (ie the hinges on the window should be towards the front of the van) the wind then cant get underneath and lift it up when driving. Hope this helps. Good luck with the install

[@lindadunlavey]

Great video!! Thanks for the tutorial. I see it's been a few years since you installed, any updates on how it is working for you? I'm getting ready to purchase a skylight. And I like the one you put in because it is so large. Hopefully, you're still seeing these messages and can let me know if this would be a wise purchase? I just found you and I am subscribing to your channel for more tips and ideas. Thank you

[@ScottAndJen]

Hi Linda. We have since sold the van. However that been said the skylight would be highly recommended from us personally, it was a lovely edition to the build. Be sure it fits you particular vehicle before you purchase and good luck with the install.

[@eatmorespinach]

Great video Scott and Jen! Is this the HEKI 2 or HEKI 2 DELUXE rooflight?

[@ScottAndJen]

Hi Drew it is neither. Its the Midi Heki. The Heki 2 is alot bigger and will not fit in a sprinter van

[@katyhansbury6837]

Hey guys, great video! Do you have a link for this roof light?

[@ScottAndJen]

Hi Katy. I would advise searching for the rooflight yourself as prices fluctuate from site to site and can be better on one site one day and another the next day. We got our from grasshopper leisure. Let me know if you are struggling and I'll dig a link out for you

[@ZoltanHercules]

Just stumbled across this - excellent. Got a link or an affiliate link for the window guys?

[@ScottAndJen]

afraid not its a midi heki

[@mattwoodford1820]

Thanks for the info. How it is holding up now? I'm tempted to fit it in the opposite direction to allow access to the solar panels in front for easier cleaning. Thoughts?

[@ScottAndJen]

Bad idea. The wind/air pressure will likely do it damage when driving.

[@mattwoodford1820]

@@ScottAndJen ah fair, does that not worry you on windy nights if the wind is coming from behind?

[@libertybell144]

Thanks for the video. I am thinking of buying a Midi Heki (versus a mini). It is 3x the price and I am wondering if it is worth it. Are you happy with yours 2+ years later?

[@ScottAndJen]

Great bit of kit. Worth the extra in our opinion

[@libertybell144]

@@ScottAndJen Thank you! Just ordered one :)

[@hughrose973]

Hey guys, great vid. Looking to do the same on my 2011 VW Crafter (MWB) - is it the same bodywork as the Sprinter? Dimensions are tight so wanting to make sure! If you don't know, if you could tell me the year and exact model of your Sprinter I'll find out. Cheers

[@ScottAndJen]

Hi there it's 2015 313 model. You are better off finding the measurements/dimensions of the rooflight online and then measuring your van

[@hughrose973]

@@ScottAndJen Brill thanks. Did you go for the version with fixed ventilation or without? If you went for the vented version, do you finds it whistles whilst driving???

[@ScottAndJen]

@@hughrose973 without

[@vixde6054]

hi sorry che i ask where you buy the window please

[@ScottAndJen]

We got ours from grasshopper leisure online.

[@rachidben4833]

Hi, verry nice. can you pass through to access the roof ?

[@ScottAndJen]

If needs must we could use it yes but never have.

[@luzejo28]

You have a link where you bought you Midi Heki Roofligh?

[@ScottAndJen]

No link sorry. Grasshopper or Jacksons leisure

[@eugeniuszsokoow2811]

its posibly open this window completely?

[@ScottAndJen]

No it only opens so far unfortunately

[@threehatsdesign6022]

what is the tape for?

[@ScottAndJen]

Build up dead space between metal and gasket

[@shellysdrinks676]

hi, how long has this been fitted now? any leaks?

[@ScottAndJen]

fitted a month prior to this vid was published. No Leaks

[@rebekkahfinnigan6664]

HI! loved your video. Where did you get your rooflight?

[@ScottAndJen]

Was either Grasshopper or Jacksons leisure. Can't remember which

[@rebekkahfinnigan6664]

@@ScottAndJen awesomr. Thanks!!

[@clintroberts1]

Is your Sprinter the 170 or 170 ext (extended). Would love an episode 0 with details of the van and overall pics. Want to put the Midi Heikl in but not sure how far forward in the van it has to sit.

[@ScottAndJen]

Hi Clint its the 170

[@mikejohnson7768]

My dad is from Darlington and I lived in Billingham

[@ScottAndJen]

Nice to see some locals viewing!

[@peanut25john]

Good video ‘ Did you mastic the wooden frame you made up for the inside to keep it in place? Or did the clips keep it in place ‘ Thanks 🙏 John

[@ScottAndJen]

Hi John. I used no more nails to keep it in place

[@peanut25john]

@@ScottAndJen Thanks 🙏 How obvious 🤭 Thanks 🙏 John

[@eugeniuszsokoow2811]

10:20 hey, don't tell me that the this fuqnn window can't fully open 4 example go up on the roof straight from the van

[@ScottAndJen]

You are correct, it cannot

[@magnuseidesandstad7251]

How is that sikaflex holding up now three years later? Got hard and cracked yet?

[@ScottAndJen]

It hasn't no. Holding up well no leaks

[@goth_dude6874]

Has it leaked at all?

[@ScottAndJen]

No leaks thus far and been in for over a year. Most of that time has been in very hot and varying weather conditions so expansion and contraction. I imagine they might come at some point but hopefully not. Good luck

[@justm720]

Can you climb out of it????

[@ScottAndJen]

Yes

[@justm720]

@@ScottAndJen sick!!!

[@Ant98986]

This could only be more northern if you both had a pie and bitter

[@ScottAndJen]

Gave us both a good belly laugh there Ant, we'll bare this in mind for future vids😆

[@creazionidirealta3300]

Ant or chips wrapped in newspaper with a cup of ohhhh Northern Tea...😊😀

[@fvingerhoed]

thank you.. familysprintervan at instagram. you are a much needed help! ;-)

[@ScottAndJen]

Glad to be of help bud

[@branchsnapper2228]

Scott looks a bit like Ryan gosling?

[@Frankiez220]

The sikaflex on the outside is a mess. Not very well done at all

[@ScottAndJen]

Thanks for that observation. Admittedly the finish could have been a little better. In hindsight I should have looked to see if the pop up window was removable. However I would like to congratulate you on you ability to pick out a negative on a video that quite evidentally has helped alot of people, that's some skill. I'm not usually much of a gambler but on a hunch I would take a stab that said comment is a reflection of your bitterness and more notably your own lack of perceived achievement in a relation to others. A good book for you - 12 Rules for life an antidote to chaos. In particular chapter 6 - Set your house in perfect order before you criticize the world. Good luck to you

[@evilkneil67]

After that creepy hatch peep, the sikaflex is what offended you?

[@Tony-et5ih]

you said smashed me head.. correction.. its smashed my head