Mighty Morphin Power Rangers 24" Altaya Review(Is It Worth It?)

And here we finally are. Hopefully you've followed along the journey, because it's been a long one for me!
On my Patreon page I share things that I'll never share anywhere else!
/ comicallytoys
You can purchase the kits(if you're in the US) from here: tokullectibles...
www.fanhome.co...

[@DesignIncase]

There's really no way to make a man in the suit design while also being able to combine from screen accurate individual mechs. The man in the suit look cheats so much to make it work for a person to wear.

[@llllshadowllll]

That's why they used the giant sized toys props and combined with the man in the suit footage in the show to make it work.

[@crackerjaxcosplay]

@@llllshadowllll *Studio scale; but yes, they used both. You're not going to get the proportions exact from a transforming toy to match that of a guy in a costume.

[@BerzerkerTank]

This looks super cool, but that price tag along with there seemingly being no ratcheted joints makes going through the hurdles to get it seem not worth it. For something this big, I would want more than just friction to hold the joints in place, especially for something that weighs about 16 pounds with the sword and Mastodon shield equipped. Even if it's just going to be something to put on a shelf in a cool pose, and not actually use it as an actual toy.

[@honesto4696]

Thank you for using the images from the Zyuranger, daizenshuu book as a direct reference. For all of the action figure reviews on KZbin, very rarely do the critics actually use photographs, for pieces that are based on live action productions.

[@ComicallyToys]

I'm really glad you appreciate that! That is also one of my gripes with other channels when they comment on figure accuracy without showing a side by side so I try to always include that when I do any reviews!

[@jcz217]

Hi I wanted to find out if your Megazord was having issue with the batteries not holding their charge, specifically the Triceratops and Tetradactyl. Mine stopped charging and I've found comments online with others having similar issues. I think the circuit board on those two might be defective from the factory as they don't seem to charge the battery properly and one parts get very hot when plugged into the usb charger.

[@ComicallyToys]

Yeah as I was building I ended up with a few batteries that were no good. I actually think it has less to do with the electronics and more to do with the batteries themselves. I think it's either due to poor battery selection or just something innate about batteries of the size required for this because I did replace the battery on the triceratops, but it died shortly after I replaced it so I had to replace it yet again as I was making these videos. I also ended up with a T-Rex that had battery issues. Pterodactyl was fine for me though.

[@GrnArrow092]

I've thought of getting a hold of the Altaya Megazord build, but I don't really know if I want it. The Altaya Megazord is an exact copy of the Soul Of Chogokin Megazord. It's just larger. If you already have the SOC Megazord, I think it might be an easy pass.

[@ComicallyToys]

Yeah. I originally wasn't planning to get it, but after I started the channel I changed my mind for the purpose of creating content, but if I didn't have the channel? I'm not sure I would have gotten it. Now if they do a Dragonzord... Then I'll be happy to have it, but until then this thing is sitting on my shelf!

[@badams83]

How would u remove those pieces u need to make it stable if u want to put them back in the 5 different zords.

[@ComicallyToys]

You can see how it all fits together in this video: kzbin.info/www/bejne/b3XWo2CYo9Wsl5Y

[@badams83]

Well I am far from it anyways I am only on stage 19. As soon as fanhome gets my next one I paid for prepared after I paid to show up on account then they should preparing the next package which has 20 to 30. This is one build I am glad they did for fanhome since I missed out when it was from altarya.

[@ComicallyToys]

@@badams83 That's really exciting though! It's a fun build for sure. I'm glad US fans now have regular access to it even if I ended up paying wayyyy more than I would have had I known that Fanhome was going to release it here.

[@obsessivefanboy7]

I like how you put in the title "Is it worth it?" as if we still have the opportunity to buy this without paying the scalping prices

[@TokuWaffle]

That comment aged poorly if you live in America, Germany, the Netherlands, Austria and Britain.

[@KillJoy5950]

Fanhome is offering it now

[@DanielRamirez-qi4oy]

Yup just subscribed to the megazord on fanhome. I feel bad he paid $4,000 😬😬😬

[@Akuma07]

Great review! Do you think they’ll do the Dragonzord? Or even crazier, Titanus?

[@badams83]

Yeah me too. I know it just came to states last month but just got my first 2 issues yesterday. Sadly have to wait for them to send me the 2 magazines that has instructions since they forgot to add them for mine.

[@JSanime]

This just announced an American release. But sticker price is still more than 1700 bucks depending on which subscscription you get.

[@ComicallyToys]

Yeah! I'm pretty excited for my fellow collectors that can now pick this up from FanHome. I know the price is still a tough pill to swallow, but for the fans that want it, it's at least available at a direct rather than imported price!

[@firechikara]

I guess now that the French release is over, that would mean it was successful enough to be brought to other countries. Because initially, they didn't even release it for everywhere in France but only a few cities as a test run, never saw it advertised officially. We knew of that only because someone saw the first magazine in a book store. And if that wasn't a success, they could drop the release in the middle (it apparently happened in some past collection from Altaya). It's a good news for fans where Fanhome can release it (Austria, Germany, Netherlands, UK and US), while Altaya is making it available for Spain and is doing a 2nd run for France (still a monthly release but this should take 21 months now against 2,5 years from the 1st run, though the price has increased).

[@shoken4421]

Lemme save y'all the trouble the altays megazord is 4,000 dollars ,your essentially paying for a car if you buy this ,it's not worth the money considering there's tons of options for cheaper megazords. Skip this and put your 4000 dollars on a car or house payment.

[@BrokeAssCollector]

You're a fool if you think you could get a car worth having for $4,000 and you're lying fool if you think that's enough for a house payment not to mention it's $1,600 now in the States of for order officially

[@SlayerRanger]

To quote the mayor of Townsville from the powerpuff girls 4000 DOLLARS!!!!!!!! Ahhhh!!! I’m no sugar daddy those days are over

[@boysawi48]

hopefully this would be available here in the philippines

[@brian-ok9md]

Fanhome is starting this build in October

[@ComicallyToys]

Yep I've made a video on it helping to answer some questions on it. I'm super excited for my fellow collectors to be able to get it without the huge mark up!

[@brian-ok9md]

@@ComicallyToys, they are offering a 12 month subscription and a 2 year subscription, I went with the 1 year subscription at a discount price

[@stevenjimenez8779]

@@brian-ok9mdordered mine too. Couldn’t pass it up, been wanting a Megazord for a long time.

[@ComicallyToys]

@@brian-ok9md Did you get your kit(s) yet? If so then how is the build? If not, then how much longer do you have to wait?

[@badams83]

Yeah I got my first 2 issues yesterday from fanhome but unfortunately they forgot to put the issue instructions so can't even build mine yet. They did it also with my delorian forgot the first 2 issues and all. Now there saying my next package is out of stock. Don't know when I will get to finish it looks like. I still haven't even got my first 2 issues of my Michael Bay optimus prime movie yet. I believe it's been like 2 months now.

[@prollydatboi8841]

Isnt this what they're doing right now from Fanhome?

[@ComicallyToys]

Yep it's exactly the same! Fanhome got the license to sell it in the US which is a huge boon to US collectors that want to get it.

[@crackerjaxcosplay]

How did you pay what you said you did? My total is only $1980 +/- a few bucks. Something isn't adding up there

[@ComicallyToys]

So I bought/built/made the whole kit before FanHome got the license to sell it in the US. Sadly I really, really overspent on it, but at least you can get a better idea of if the kit is worth it to you or not from me! I hope my video helps!

[@droma2366]

Does it transform from the 5 zords?

[@ComicallyToys]

Yeah it absolutely does! kzbin.info/www/bejne/b3XWo2CYo9Wsl5Y

[@Daikon_Micucci]

You should compare it to the HasLab Unicron.

[@ComicallyToys]

Haha! I wish! That was the first Haslab and I was too scared to back it at the time. I do wish I would have backed it, but I don't think I can afford the aftermarket cost of it now!

[@splito9573]

just got one for 450€ (france) glad to get one for this price. I would nerver pay more than 800€ for this.

[@ComicallyToys]

You got the whole complete kit for 450?? That's amazing! I'm so jealous. I've overpaid even more because of the import costs, but that's the cost of having a KZbin channel unfortunately!

[@Maatjuhhh]

Tbh I can't wait for someone to do a stop motion transformation like in the show. Working with a forced perspective, it could pass for the same transformation as in show.

[@christopherbaez8514]

Holy shit 4k 😅 hopefully we get a haslab one one day

[@joseavenia3634]

looks amazing! but to over price i could get 10 flame toys kurokay dinomagezord. for 4k it should have fully artticulated , and have bare any issue due the price. i prefer getting the statue

[@kirbymarchbarcena]

There is a Megazord Super Robot Chogokin that is almost 5 inches tall which is really small than that gigantic Megazord

[@joseavenia3634]

thank you for reviewing it.

[@RedXPower]

Disappointed that the end result is a very finicky mess. This model kit had much promise.

[@stevenmazanet9933]

why does my 1993 megazord sword have a rounded tip?

[@Daikon_Micucci]

Because children

[@stevenmazanet9933]

@Daikon_Micucci well I mean almost all versions I see are pointy, but mine isn't. what version do I have? I got it in Wisconsin

[@AdamWright319]

Where can I get one

[@TokuWaffle]

Fanhome is distributing the kit to more markets

[@joseavenia3634]

this barely should have any issues for pricepoint.

[@BiosoniX]

5000 $ usd !??!? god !

[@ComicallyToys]

🤣🤣🤣 Yeah I got it thinking it would be good content for my channel. And it's been okay... But I'd much rather pay the current FanHome price of under $2k for this thing. I'd have felt much better about this purchase then.

[@流龙马]

🎉🎉🎉🎉

[@流龙马]

希望后续出龙王凯撒跟腕龙合体

[@lio_convoy714]

Because I was worried about the figure and not getting parts in the future I ended up buying two of these. I have 1 almost together and one in totes waiting for when I need it.

[@joseavenia3634]

hottoys , or threezero shoud make a megazord.

[@mlo009]

Big boy.

[@GaryYuen1987]

almost 5000 for this

[@GaryYuen1987]

youre missing two

[@joseavenia3634]

i will pass . i am happy with kurokai flametoys megazord.

[@rafe9852]

soc is the way to go