Рет қаралды 29,551
Migomat S-mat 180, which is in my possession for about 8 years from the very beginning, did not weld too well.
The wine usually lies on the side of the control board, and the power supply of the wire feed motor from the bridge rectifier, which causes unstable operation of the device. It can be remedied by buying more expensive migomers, but for domestic use it is possible to replace the control board with a universal one at a lower cost.
For processing, we need:
- universal plate (PLN 140)
- gas solenoid (PLN 40)
- power contactor (PLN 40)
- 24V transformer (50 PLN)
The total cost of rework in my case is PLN 270.
From the migomat we have to remove the original control board and its wiring. With the purchase of the original plate, we get a connection diagram by which we connect the elements with the plate, respectively. The film shows the sidings from the assembly of the tile and additional elements. The main advantage of the new PCB is the separate feeding of the feed motor, thanks to which we can set the speed more precisely. In addition, the plate has the electro-valve closing delay function as well as the switch-off delay of the transformer.
♫♫♫♫♫♫♫♫♫♫♫♫♫♫♫♫♫♫♫♫♫♫♫♫♫♫♫♫♫♫♫♫♫
♫♫♫♫♫♫♫♫♫♫♫♫♫♫♫♫♫♫♫♫♫♫♫♫♫♫♫♫♫♫♫♫♫
- ~ - ~~ - ~~~ - ~~ - ~ - Music used in the movie - ~ - ~~ - ~~~ - ~~ - ~ -
☆☆☆☆☆ Alan Walker - Specter [NCS Release] ☆☆☆☆☆
♥ Alan Walker
➞ Facebook https: // alanwalkermu ...
➞ SoundCloud / alanwalker
➞ Twitter / iamalanwalker
♥ Download
➞ sh.st/H2mZA
- ~ - ~~ - ~~~ - ~~ - ~ - #muzykabezhaczyka - ~ - ~~ - ~~~ - ~~ - ~ -