The "CHEAP" Tacoma, rear end and engine work! (This is Getting Expensive...) Ep.4

[@redline1666]

The 3.4 is actually zero interference so if you snap a belt its no big deal. Good video as always!

[@crashsoome]

Yes you beat me to it

[@crashsoome]

I had 282k on my engine never replaced the belt😊

[@justinmatthewl]

Yep I bought a tacoma with a broke belt. Owner thought the motor was trashed. Put a new belt on it and drove for years after that.

[@bige311]

​@@justinmatthewl same thing happened to me I almost felt guilty when I drove the truck :)..

[@KayBeee]

I know this video will be good because its Mike.

[@heladiomoreno5504]

I hit the like button before the video even starts

[@victorkirby7652]

Just as a heads up, that 3.4 is supposed to get a dual electrode spark plug. The 3.4 uses a waste spark ignition ignition system. The plugs fire on the exhaust stroke too when the cylinder that they are paired with is on it's compression stroke. Since the plugs fire twice as often, the dual prong makes them last as long as a single prong that is not installed in a waste spark application. Also, It's a non-interference engine, so pistons cant kiss valves in the event that the timing belt snaps

[@travisholmes05]

I think your suppose to use twin prong spark plugs on the 3.4 but I’ve heard guys say it doesn’t matter… there is a sticker from Toyota on the engine… love the build so far

[@MrDan1509]

OE plugs from the dealer are only a buck and some change more than the NGK Type R plugs.. I love NGK but you only get 17K miles before they have to be changed out. OE plugs are still like new at a 100k.. I just changed the factory plugs in my 2005 4runner 3 yrs ago at 235k. I know they was original because i got my rug from an old couple that bought it new and always serviced at a toyota dealership. The My Toyota Record shows they was never changed out! I gained 2 extra miles per gallon with the new plugs if that says anything about the OE plugs!

[@shelbysnake5003]

I don't mind waiting a few weeks for a new video because Mike always delivers!!

[@UnlocalizedSimulator]

This Tacoma has quickly become my favorite truck on the channel! I think you should keep this one, Good budget build

[@gk5392]

I like that you work on vehicles that us everyday folk would consider buying and building. Too many channels go to the extreme where it’s not even realistic unless you have a full blow fab shop. Keep it up

[@mikes4x4garage]

ha! im just a normal folk anyway lol

[@JD-um8sq]

Ive really started to dive into working on my own truck because of these videos. I like how you leave in the little mistakes here and there because it makes it seem so much more doable for us non mechanically inclined haha

[@jaromnord8325]

This motor is non interference which means if the timing belt breaks you actually won’t contact valves which is nie but definitely still don’t want that breaking on you. I just did my timing belt on my motor! Keep up the good work!

[@g_ray_sr.]

Good thing about the 5VZFE it’s non interference so you wouldn’t have to worry about bending any valves 😊

[@jaromnord8325]

I’ve also heard that the oem spark plugs on these motors make a little bit of a difference over the NGK brand. Specifically for this Toyota motor. Something with the dual electrode keeps it burning the fuel more efficiently

[@JLeeChron]

3 coils for all 6 cylinders is why Toyota recommended Twins should be used for optimal spark/performance

[@JasonDivock]

I’d like to thank this channel for reminding me to blast 90s jams while I’m working on my bikes.

[@Aaron-uz8xt]

Looks so much better already

[@mikes4x4garage]

Thank you🫡

[@tylermartelle7041]

The 5VZ is such a beast you can just let the timing belt uninstall itself and the valves won't meet the pistons.

[@Tanner731]

the jeep timing chain should actually be replaced at some point, they stretch out eventually. just got done doing a 4.2 in my friends CJ and the chain was so sloppy it was eating a hole in the cover

[@aubreychowdhury3012]

Replace the spark plugs you put in with dual electrode. That’s what these engines call for

[@TheDifferentLevel]

It's always a good day when Mike uploads. Great work!

[@mikes4x4garage]

Thank you!

[@MrDan1509]

Okay, Mike.....it's been close to a month now....we need a new video🤣

[@leadpilled5567]

I have the same wheels on my magnetic grey F150. I did take a hole saw cut out the Rocktrix logo and epoxied in some custom ones a friend 3D printed. Raptor caps will also work

[@ramirocantu307]

Great video to watch, just like back in the day watching truckin' on the weekends! Making a complex task so easy and simple to do is probably the best thing to watch on KZbin! Comes in handy for those who try and have troubleshooting similar tasks of there own with this model and make so thank you on behalf of those who need guidance! Great sound effects and nice cowboy hat! Lol keep these cool videos coming partner! Definitely enjoying the content! 💯🏁

[@bradleyeychaner3777]

Don't know if you're a "by the book" guy but there is a sticker in the engine bay saying to use dual electrode plugs like the ones you pulled. Just an FYI. Love the vids man keep it up!

[@anarchy_of_dirt]

Timing chains break, tensioners break, it’s a lot easier to change a belt than a chain. Both of my roommates had their timing chains break before 170k miles. One was a Colorado, the other was a Cobalt.

[@snook863]

Like the videos Mike. Always good to see someone figure things out instead of taking it somewhere to get done. Solid entertainment too. Thanks for the vids!

[@johnbailey1305]

Good work Mike. Lots accomplished!

[@riders315]

That 3.4L takes those dual spark plugs! But good job on the truck man! Love the videos!!

[@magodize]

The wheels are really turning the look of that truck around! Good job as always Mike

[@mikes4x4garage]

Thank you! they’re a little darker than I thought they’d be. I still like them though!

[@cpsmonroe1]

Don’t sleep on the M12 Fuel Stubby. It gets into tight spaces and can still pull a bulls nuts off. It’s great for engine work as well lol. Still have my M18 but rarely does it need to come out of its drawer. Just use a 4,5, or 6.0 batt on it and you’ll see what I mean .

[@meznova3741]

I have had the rock trix wheels on my 1st gen for almost a year now. there great!

[@thurstonjohnson4299]

Love the budget builds. Nice cleanse of the palette from the crazy over built rigs that are flooding the KZbin content

[@mikes4x4garage]

We’re on a budget for sure!

[@Tactical_Pterodactyl_Knives]

I had a set of rocktrix wheels on my old jk and the wheels were the best part of the jeep. The fit and finish was awesome and they actually had great customer service when i went to order a 5th but they were out of stock on their site. They balanced well with my MT's, looked awesome, and like you mentioned were by far the cheapest thing available.

[@JLeeChron]

Waiting for some work on this truck! Non interference so if the belt does go -not tragic Ive had 224k on an original and it was still going .. cracked and needed done tho- Also twin tip replacements (see the decal on the tb cover) 👍 Great work Mike

[@mikes4x4garage]

That’s good to know! I wish rock auto would’ve suggested the double tips then, I didn’t do any research prior haha

[@CB-hr6zs]

Always a good day when there’s a new episode

[@erice4611]

I put a Eaton Elocker in my front diff with a 2.5” liftand a new set of Baja Boss A/T

[@eric3301]

Great video dude, decided to get the same wheels on mine after this video. Just finished up putting new suspension on with a 3 inch lift and they will be the cherry on top. The money pit is deep over here.

[@TheExtra40414]

Your intro statement is exactly why im here for every video. LOL keep up the great entertaining videos.

[@bajamedic]

I am in Vacaville. Get the proper adapter and I have nitrogen and we can re charge those shocks.

[@ryanthompson2693]

You can discount the brake line mounts and pull the axles out just enough to pull the 3rd member.

[@justinb3007]

Thanks bro i love the 20min beer break you give me 🍻

[@theblack5heep682]

Looking good, I’ve got the same wheels on my 3rd gen 4Runner love ‘em! Keep up the good content!

[@dgreen8388]

That wheel/tire combo is slick! Can't wait for the next episode!

[@JB50713]

Wicked repairs so far! Shocks came out beautiful.

[@winter_ritual]

Fantastic job, man. Love watching your videos. Looking forward to the next one.

[@danielkennedy5210]

Great progress i am thinking about picking up a 98 4runner cheap this series is an inspiration

[@PaulWall78]

you're the man!! i have an '04. love it! 5 speed. very fun and useful

[@mikes4x4garage]

Thanks Paul!

[@christophergiano2222]

Can't wait to see this thing out on the trail

[@mikes4x4garage]

😎😎😎

[@ragingbullet3952]

I have a 2.7 which actually has a chain, so toyota did do that for some models.

[@FansyTheFamous]

New wheels are sick - makes the truck look much better!

[@jasonjavelin]

So hype to see you upload this, been looking forward to it. Had the 3.4 in my 3rd Gen 4Runner and loved it. Also those wheels and tires are fucking SICK

[@old_con]

Wheels & tyres look great. Everything turned out just fine, you did well. 👍🏽😎

[@mikes4x4garage]

Thank you Gavin!

[@jairohernandez7957]

Always a good day when money mike posts

[@hawaiian4934]

Supercharge it especially since you got a 3.4 engine the way it sounds with the supercharge is the best 💯

[@davidrichardson8394]

Music taste: 🔥 Truck taste: 🔥 Hat taste: 🔥 Beer taste: 🔥 Love this channel

[@mikes4x4garage]

Thank you sir 🔥

[@beans4gas]

What color painting the body? Toyota Orange with black bumpers and flares would be nice. Can't believe a bit of work and those dampeners look new.

[@luisangelino9573]

Love your content sold my 2000 taco and now I want one again because of you 😂

[@mikes4x4garage]

They are fun little trucks

[@SILVERGHOST-qu5cn]

Really enjoying this build I drive a 2004 love it 🤘

[@patrickkopek9613]

Love this channel keep up the good content.

[@rodthecollegeguy]

Love the Tacoma content! I’ve learned so much from you and appreciate the hard work 👊

[@project4funner]

It’s wild that someone put kings on that beat up of a truck

[@robertthorgudmarsson4898]

fantastic video as always Mike, you have a good thing going here

[@colemoto1888]

I laugh every time when I see a shot of harbor freight in the video 😂

[@Elvisnotpresley97]

I actually bought the OEM spark plugs for my brother, same engine V6, I got 6 and it costed me $15 lol Also I think NGK spark plugs you should not put anti seize

[@UrbanOpsOffRoad]

Dude wtf! You’re always finding the best tire deals in the state! Wtf! Lol that’s awesome!

[@bucketings]

The cut to harbor freight 😂 every job ive ever done

[@eduardorivera7723]

build is coming out nice and the new tires and rims look good

[@colegilli]

Another great video! Well done mate!

[@daniellablee6682]

Perfecto el trabajo,no seria conveniente cambiar las correas exteriores o auxilisres? Excelente video ,saludos👏👏👏👏👍🍻

[@UrbanOpsOffRoad]

Don’t forget to like before you start asking if you can fit 33”s with stock suspension. Keep up the good work bro!

[@gregoryadame3945]

What is the difference between double tip sparkies vs single tip? What are the pros & cons for running double tip NKG spark plugs in the 3.4L 5vz? Interested to learn more!

[@nathankoroush7918]

double tip is from factory and is called for on the 3.4

[@mikes4x4garage]

Yeah I would be interested to see if it actually makes a difference. No issues yet…..

[@tjthompson6172]

I can’t wait for this channel to become huge so you can quit your day job and post more. Keep it up man!

[@mikes4x4garage]

That would be something! I’ll keep grinding!

[@letsgo579]

Great content as always! Keep'em coming Mike!!!!

[@ChrispyWRX]

“Okay they are not that much lighter” 😂😂

[@DistantThunder89]

Looking forward to this build! It's gonna be sick

[@jonaswilf1778]

I always love your vids man! Keep up the great work

[@drew.blanks]

Gettin work done Mike! Supercharger in the future??

[@PiddlinWilson]

Your shocks are to long is what caused the bracket to crack the dont compress far enough

[@dontmindme317]

Chet Faker making an appearance at 17:31, a man of culture I see

[@mikes4x4garage]

🤌🏻

[@cullenwhite4005]

Hey man did you check ur rear diff breather for mud? It’s on the top of the diff if it gets clogged it’ll make ur rear diff leak

[@mikes4x4garage]

Yeah I did, it’s looking good. The new seal has stopped the leak 🤌🏻

[@williamtiernan1105]

Love it! Keep ‘em coming!

[@mikes4x4garage]

Thank you!

[@sinister184]

I do like watching those kinds of videos 😉 Ready for body work!

[@ann-mariekitson9554]

Another great video👍👍👍

[@grasslad6898]

Absolutely love your videos. What do you for work full time? Assuming you aren't a mechanic since you do this stuff on the side but you're a damn good one.

[@mikes4x4garage]

Thank you! I’m actually a diesel mechanic for the Coast Guard 👍🏻

[@ukeacreator93]

If you really wanted to do it the easy you could of just unbolted the brake lines and pull the axle shafts out about 2-3 inches to get the third member out . I’ve done it without fully removing them . Just a tip

[@mikes4x4garage]

Good to know

[@ukeacreator93]

@@mikes4x4garage I think you did the right thing by leaving the leaf packs alone . It is sitting pretty nice they way it is !

[@saltymethods2637]

Great content. Keep it up!

[@mandexter956]

No Brewskies on this one? lol... The truck is looking good!!

[@dannymartin4x482]

Those wheels are nice!! Luv the color

[@mikes4x4garage]

Me too!

[@JBdizzy]

Love this bro awesome work

[@adairoreyna]

Dude keep it up! Killing it

[@quinnreller]

Yew ! Stoked to watch

[@ToolsInAction4u]

Fun fact. The timing chains on the 4.0 jeep motor can fail and cause a mess. Ask me how I know😅. They are both non-interference motors though.

[@mikes4x4garage]

Oh I’m sure, anything can!

[@JRose444]

love these vids! keep it up man.

[@CA11100]

Cheap cars have been some of my most expensive cars haha

[@mikes4x4garage]

Absolutely!

[@philliphansen7060]

I'm going to be doing my timing belt why do people line up the cam marks on the belt

[@rubuk2996]

8:31 are those leafs bent?

[@jsvallee567]

3.4 zero interference !

[@theGRNapples]

Been wanting to learn how to weld. Which Titanium welder are you using?

[@mikes4x4garage]

It’s the titanium 170! Works great

[@theGRNapples]

@@mikes4x4garage would you say the 125 flux would be a good entry level welder for the kind of stuff you're doing?

[@mikes4x4garage]

@@theGRNapples flux welding is good but has its limits with thin metal. If you’re doing only thick steel you will be ok. Only use them outside as well

[@krismonette8173]

Keep it up bub! Really fantastic content, one of the best car mod/salvage channels I’ve seen!

[@jacobjohns6047]

I can smell that diff from here

[@mikes4x4garage]

Yummy diff fluid

[@Kyle-ev4fk]

My posse's on Broadway Posse up!

[@mikes4x4garage]

🫡

[@Kyle-ev4fk]

@@mikes4x4garage though I am cool enough to know the song, I have no idea what your emoji means... so I am going to take it as offensive.

[@williambabak6034]

Niiiice! Love mikes vids.

[@Shreddin247]

lets goooo! been waiting for another vid from you