T5 Shifter Fix - T5 Shifter Bush Replacement - 5 Speed Shifter Problems - DIY Repair

[@stevendadswell4445]

Have you got a part number for the bush or contact for the seller I brought one of ebay but its to small

[@MikesManCave]

There is no part number, it's an after marked manufactured part. What do you mean too small? There is only one size, Just put in T5 Shifter bush and about 100 of them pop up, I just bought the cheapest one as they all the same.

[@pingapete666]

I'm in the same boat as of today trying to chuck one in my manual au ute, the outer lip up the top was almost the size of the hole. I ended up having to wrap alot of tape around the bushing just to get it to seat properly and I know I'll be coming back to fix it properly soon.. Annoying as FK because 2 years ago I done the same job in another Au falcon of mine and I was sent the correct sized bushing, fitted it with no troubles at all.. Both bought off ebay and both around $20-25

[@pingapete666]

@@MikesManCave Must not be only one size, I've done this job twice now the first time with the correct bush sent to me and this time it was much too small.

[@MikesManCave]

@@pingapete666 I would say the seller has sold the incorrect part, may be get the seller to send you dimensions, they should be a standard size.

[@pingapete666]

@@MikesManCave I agree, I will see how I go but as I bought their last available one I have a feeling they will just want to refund me, if I was bothered to send it back that is Even the cube website sells them but doesn't say the dimensions, Was great seeing your video as I could tell straight away that the one I was sent last time was much thicker (wasn't sure if maybe I had a different gearbox in this falcon as I just bought it but its 100% a T5)

[@kyleedgerton3698]

I've got one of the aftermarket ones in, and the bottom lip has separated. How do you get these out. Im trying to pry under the top lip. It is just folding it. Any suggestions? Ever had to remove one ?

[@MikesManCave]

Just pry it out with a screw driver or similar, if the lip folds up get some long nose pliers and pull it out. It's only soft metal. Then replace with a new one. Don't forget to grease it up with some high temperature grease.

[@kyleedgerton3698]

@MikesManCave yea we had to press it out with a press. All good.

[@MikesManCave]

@@kyleedgerton3698 Wow that's interesting, did you disassemble the gear box?

[@kyleedgerton3698]

@@MikesManCave yes