It's great to see this plane as real Thank you from Iraq especially
@doctormig2709 Жыл бұрын
Thank you ;)
@iqthunder13 жыл бұрын
Very nice job, thank you. Greetings from Iraq.
@doctormig27093 жыл бұрын
Thanks.Greetings from Macedonia
@thestranger65542 жыл бұрын
Iraqi air force.. 🌹🌹🙏🙏
@mitzyismad3 жыл бұрын
Fantastic job. What a beast of a plane and still one of the fastest out there.
@doctormig27093 жыл бұрын
Thanks a lot Dana :)
@ИгорьДевяткин-х6э3 жыл бұрын
Великолепная работа! Великолепный и могучий МиГ! Браво Доктор!
@doctormig27093 жыл бұрын
Thanks :)
@SuperBrmb3 жыл бұрын
Odličan! Možda tvoj najbolji do sada :)
@doctormig27093 жыл бұрын
Hvala :)
@tmobaile1187 Жыл бұрын
Fabulous 👍❤
@doctormig2709 Жыл бұрын
Thanks 🤗
@williamroberts84703 жыл бұрын
My favorite type of foxbat. Nice and pointy.
@swing.wing_singh3 жыл бұрын
What an absolute monster of a kit. Brilliant job. Lovely weathering. The overall finish is surreal.
@doctormig27093 жыл бұрын
Thank you Sherbir.I am glad you like it ;)
@Vincent-gc8zd3 жыл бұрын
Wonderful!
@doctormig27093 жыл бұрын
Thanks you :)
@modiraq53242 жыл бұрын
Very nice work, greetings to you from Iraq, but good luck, artist
@doctormig27092 жыл бұрын
Thank you :)
@agdgdgwngo2 жыл бұрын
Just subbed DOCTOR MIG, love how everything is a jet in 1/72, some of my favourite subjects, very well structured videos/
@doctormig27092 жыл бұрын
Thanks for the support
@moogee40413 жыл бұрын
Lovely build
@doctormig27093 жыл бұрын
Thank you :)
@Simonize412 жыл бұрын
I love the MiG 25, such an incredible aircraft. I’ve been lucky to see a few in real life, unreal. I’m glad ICM released kits of this beast (I have 4 x 1/48 kits in my stash). Nice work Dr MiG.👍🏻
@doctormig27092 жыл бұрын
The mig25 is an awesome machine I.love it
@AlmirTaranis3 жыл бұрын
Very nice build. I'm doing same model, but ICM rebox to Revell. It comes with decals to cockpit. I find panel lines to shallow and fragile, hoping they won't disappear after painting. Bravo majstore 🤙😁🤙
@doctormig27093 жыл бұрын
Hvala ti Almire :) svako dobro :)
@foreverplastickits1383 жыл бұрын
*A lot of work on this splendid kit, 👍👏👏👏*
@doctormig27093 жыл бұрын
Yea and it is totally worthed.
@humbertogaggero29043 жыл бұрын
Another master piece, the Foxbat is one of my favourite plane, really well done.
@doctormig27093 жыл бұрын
Thank you ;)
@SisodiaAbhishek3 жыл бұрын
Doc has given proper treatment to this model 😁
@doctormig27093 жыл бұрын
Thanks.As it deserves :D
@septiccalling83413 жыл бұрын
Nice one Doc, that’s a really tasty looking piece o’ gear! 👍🏻👌🏻
@doctormig27093 жыл бұрын
Thank you :)
@maksemoosabedalla61392 жыл бұрын
Thank you
@doctormig27092 жыл бұрын
Np at all :)
@papermodelss3 жыл бұрын
Wow, Nice build!
@doctormig27093 жыл бұрын
Thanks.Cheers ;)
@breakaway4143 жыл бұрын
Very good looking model. Great work!!!
@doctormig27093 жыл бұрын
Thank you verry much ;)
@SprueFascinationChannel3 жыл бұрын
Mighty fine job 😉
@doctormig27093 жыл бұрын
Thanks :)
@borispetrov83233 жыл бұрын
очень качественная, зрелищная работа. жду следующие)
@doctormig27093 жыл бұрын
Thanks :)
@JedenSiedemDwa3 жыл бұрын
Looks perfect! Great! ;)
@doctormig27093 жыл бұрын
Thanks ;)
@jcwoodman52853 жыл бұрын
Cool🤗. I'm on their 48th RBT now, very nice!
@doctormig27093 жыл бұрын
Have fun with it ;)
@TapChanek3 жыл бұрын
Looks great, doc.
@doctormig27093 жыл бұрын
Thank you! Cheers!
@Rorynes3 жыл бұрын
Another great build.The camo is the same you mean great decal option in the video:)
@doctormig27093 жыл бұрын
Thank you.Yes exactly haha
@josealejandroalvaradobotei85843 жыл бұрын
Excelente trabajo y video a mi también me encanta él aeromodelismo 🇨🇱😎👍
@doctormig27093 жыл бұрын
Thank you ;)
@hankrol78303 жыл бұрын
`Nice build. I love it
@doctormig27093 жыл бұрын
Thanks :)
@landkomtur64163 жыл бұрын
That looks like a cool breeze of a kit.
@doctormig27093 жыл бұрын
It ismI enjoyed it a lot.
@RimsModels3 жыл бұрын
excellent build there my friend love the painting and weathering stay safe
@doctormig27093 жыл бұрын
Thank you verry much.Take care ;)
@tonyperez47913 жыл бұрын
Outstanding build ! Until the next one take care, be safe, Tony
@doctormig27093 жыл бұрын
Thanks Tony.Be safe.
@عليعلي-خ3خ6ص3 жыл бұрын
والنعم من العراق
@dimitrisg.45043 жыл бұрын
Excellent! Especially the tail section is second to none!! What a pity for the cockpit as you did a great job on it...
@doctormig27093 жыл бұрын
Thanks.I had to close it.My customer asked for it to be closed.
@showtime1123 жыл бұрын
Another Cold War classic! It was one of my first childhood attempts at building models. It was in 1/144 scale and needless to say, the result wasn't very good
@doctormig27093 жыл бұрын
There is always time to do another one ;)
@antonakisooreos82033 жыл бұрын
Good
@marcogarbin29773 жыл бұрын
Since long time I was waiting for this moment. A MIG25!!!! Fanstastic job my friend. I am building a Condor kit for a PD version, but really a nightmare....Compliments once again
@doctormig27093 жыл бұрын
Thanks.I have already built two.of the old icm pd's.I also have another one waiting to be built :D
@franciscorodriguezblanca69933 жыл бұрын
Una maravilla 👏👏👏
@predragstojakovic73313 жыл бұрын
👌👍
@صابرالهدار-غ5ك2 жыл бұрын
نحن كانت عندنا mig 25RTB جميله وعندنا mig 25 m الملاح في المقعد الخلفي فوق مرتغع قليلا وثاني تحت الذي يقود الطائرة بصراحه تصميم جميل انا من ليبيا 🇱🇾
@doctormig27092 жыл бұрын
Thanks )
@СергейСтепанов-ч1з2 жыл бұрын
👍👍👍👍👍👍👍
@ramtin-s87223 жыл бұрын
nice details!
@doctormig27093 жыл бұрын
Itnis totaly worhted getting this kit.
@svenknappe46573 жыл бұрын
Endlich mal wieder eine MiG von Doctor MiG ... klasse Arbeit! 👌😍
@lesthiele49213 жыл бұрын
Hi Doc, another great result from a true master, I particularly liked the weathering, keep safe and well, best regards from Australia.
@doctormig27093 жыл бұрын
Thank you.Stay safe,Regards :)
@henrysanchez48103 жыл бұрын
Excellent finish my friend incredible work, and your right about the fit issues I'm having a time with my 1:48 version.
@doctormig27093 жыл бұрын
Thanks.Good luck with yours.
@henrysanchez48103 жыл бұрын
@@doctormig2709 Thank You Doc..
@doctormig27093 жыл бұрын
Np at all ;)
@misterbig90253 жыл бұрын
Iraqi Air Force was at its peak in the 1980s.
@doctormig27093 жыл бұрын
It was :)
@alial-zubaidi46622 жыл бұрын
The decals are a little bit far from the real colors, the triangle insignia is olive green in fact not that bright green Thanks for the amazing video
@doctormig27092 жыл бұрын
Thank you :)
@i.setyawan3 жыл бұрын
Nice job, as always. The model seems to be naturally tail-heavy. Did you need to add a weight in the nose?
@doctormig27093 жыл бұрын
Thank you.I did add weight in the nose just in case.
@kamui0043 жыл бұрын
Just a question, what do you do with your builds that cause such fitting issues? I've read your zvezda mi-24 build as one of the worst fitting kits you've ever built and now watching this mig-25 built too. I've built both. My zvezda Mi-24V I almost didn't use any putty, I only deviated from instructions by gluing each front and rear half first. After that almost perfect fit everywhere, and only one spot on the upper fuselage on the rotor opening needed a bit of clamping and sanding and a spot between front and rear canopy bubble where it shifted a bit when gluing. Your build @ 0:45 you mistakenly place intake ramps behind locating tabs but further it seems you correct that mistake @ 4:54 the front to rear fuselage join for mine was good, a little step but very little sanding fixed it. Your front fuselage looks to be shifted up by something in your assembly. @ 5:16 the vertical tail and rear panel part left huge gap in your build. Mine didn't leave a gap, sat flush with almost perfect fit, only had to sand join line ahead of strakes since there's no panel like there. @ 5:22 Mine had a few spots around lower intake lips, upper intake edges and upper front to rear fuselage join needed a little bit of putty, but gaps were not as big as yours. @ 6:20 my wings had smaller gaps, upper left one used surfacer 1000 all along and right wing only front half. Lower wings only four spots where locating tabs joins were visible.
@doctormig27093 жыл бұрын
Well I guess I rush the assemlby :D something I am guilty of with almost every model I do.The mig is actually a great kit.I did not follow the instructions to the letter and I thought I can build it more efficient and I was mistaken.That is why I did have fit issues with it.As far as the mi24 is concerned.That kit is not designed to be built.with all doors and covers closed.That is the main problem with it.I want my mi24s to have closed doors closed engine covers etc and it is a real pain to make it like that.It also depends on how flush younwant the panels to be.I want mine perfect so that is why I sand more than ussual ;)
@Канатоходец573 жыл бұрын
швы плохо заделаны,а вообщем хорошо
@doctormig27093 жыл бұрын
Thank you :)
@АлексейРутковский-е8ъ5 ай бұрын
Хорошее видео, но не полное... Покажите в следующих как происходит окрас шасси, сопел, допвооружения/оснащения, сборка воедино... А то кабина, склейка фюзеляжа, оцкая шкурка, божественный грунт, прешейдинг, декали, смывка и вуаля!
@doctormig27093 ай бұрын
Thanks but that way it.will be too long and boring :)
@thethirdman2258 ай бұрын
Well done on this. The fit of this kit obviously leaves a lot to be desired. The join between the cockpit and the fuselage looks like a nightmare. I posted earlier saying there must be better kits around than this and I think my comment might have been misinterpreted. It’s now missing. Sorry about that.
@doctormig27098 ай бұрын
Inhavent seen the previous comment :)
@มาโนชชุมแสง3 жыл бұрын
Foxbat in SCALEWORLD.
@hamishsheinkels14783 жыл бұрын
Love the build as always, ever thought about doing a mig3?
@doctormig27093 жыл бұрын
Thanks.I must say I havent cinsidered the MiG3.I am not into WW2 aviation that much.
@zeljkoradovanovic1843 жыл бұрын
👏👏👏👍🇷🇸🤝🇲🇰!!!
@doctormig27093 жыл бұрын
;)
@apm-algerianplasticmodels3 жыл бұрын
Thats wonderful man , what was the color of landing gears and wheels bays
@doctormig27093 жыл бұрын
Thank you.I painted them in steel ;)
@sohaibshehzad20523 жыл бұрын
Someone is into Nail Biting.
@doctormig27093 жыл бұрын
Big time :D
@sohaibshehzad20523 жыл бұрын
@@doctormig2709 Don't do it during the pandemic.
@doctormig27093 жыл бұрын
I try :D
@Rogerholberg3 жыл бұрын
Very nice build. What panel wash do you use?
@doctormig27093 жыл бұрын
Thank you Roger.I use a homemade water based ink wash.I dilute some drawing ink in watwr and add a drop or two of liquid soap.
@Rogerholberg3 жыл бұрын
@@doctormig2709 - Thank you very much. It's very effective. I will try to brew up a batch.
@doctormig27093 жыл бұрын
Np at all.If you need jelp just ask ;) I will be more than glad to help as much as I could.
@lazarjeremias14213 жыл бұрын
Bok. To je new tool?
@doctormig27093 жыл бұрын
Jeste new tool ;)
@manofthehour912 жыл бұрын
What am I missing here because the ICM mig-25PD I bought back in 2018 was absolute trash and wasn't nearly this well detailed
@doctormig27092 жыл бұрын
The old icm PD is an old kit.Pretty bad I know I have buil several of them.The recce bomber mig25s are new moulds and are awesome
@zoromodels3 жыл бұрын
good, look at my models, what you think?
@doctormig27093 жыл бұрын
Hello.where should I look?is there any link or somethig?
@doctormig27093 жыл бұрын
I saw you channel.I like your models ;)
@Falconeer843 жыл бұрын
I've build 2 ICM kits so far. A MIG -25 and a MIG 31, those are also the last from ICM. What a horrible fit and really bad build instructions. Never was so frustrated with a kit