07-18 Front wheel speed sensor replacement Jeep JK | abs traction control light Jeep Wrangler How To

[@kmdesantis]

I have watched a few different videos on replacing the sensors front and back. Hands down this video is the best I have come across. Spending the time on the small details (camera angle, lighting, voice over, arrows, etc) makes all the difference in the world. Nicely done Sir!!!!

[@MileHighCampers]

Thank you so much for the great feedback, I really appreciate it!! I really try to make my videos with the viewer in mind, so it's great to hear that it worked on this video!!

[@sidneycoakley1524]

It’s an easy job. Unfortunately I’m getting good at changing mine 😂

[@TomMack530]

@@sidneycoakley1524 yeah right, same way on my 2005 Chevy Silverado lol

[@corky462]

2 years later and this statement is still, to the letter, accurate. Nicely done sir.

[@gunztommiegunz]

I just did a rear ABS sensor you don’t even have to take the wheel off it’s easier but you don’t have to nonetheless the front well the front sucks

[@rickstafford5316]

The best video of this process. Thank you for your time and patience in making this video. You da man

[@johnnyalonso]

Thank you so much for this great step by step tutorial. You saved me a lot of time and money. Happy holidays bro

[@blumadue]

This video is perfect. I was able to follow it straight through and replaced the right front wheel sensor on our 2017 JK in less than an hour. Outstanding. Thanks for sharing your expertise.

[@MileHighCampers]

Awesome, glad the video helped you out & thanks for the positive feedback!!

[@Ranma1981]

I just replaced one of these sensors....a note to your method. If you are replacing it on the passenger side, then an easier way to access the clip (after punching out the clips behind the shock) is to remove the air filter completely which really opens up the area above the passenger side connection so you can easily get your hands down there.

[@CraigNurmiSr]

DAMN! Mine is drivers side 😊

[@klr7793]

Being able to do your own repairs sure helps the budget! 😊

[@MileHighCampers]

Thank for the support K LR!! DIY helps the budget but can cut into R&R! LOL

[@JAmesHughes-j8o]

Thank you, this was very helpful. I just wanted to inform everyone that the sensor snapped off in the hole and I had to drill it out, carefully. Then I used a tap to get a grip on the piece and it popped out. It is magnetized so the tap was the only way to pull it out. Everything else in this video was helpful.

[@chrisandscottscoloradoadve4780]

We Love our Jeep, but H S we’ve had a lot of stuff go wrong. I’m glad you were able to fix this on your own.

[@MileHighCampers]

We have had several things that needed repair this year with ours: Death Wobble, Spark Plugs, Oil Pressure Sensor, Front Brakes, Front Speed Sensor...I took it to Parker 4 Wheel Drive to have the Death Wobble resolved, it cost us $3200 to have it fixed. Everything else I have done myself. I wish I would have videoed the spark plugs and the oil pressure Sensor, those would have been good videos for people. But I will be doing videos on rear brake replacement and new rear shocks coming soon, I have the parts, just need to install them... So I can relate! Thanks for watching and commenting!!

[@jellosmello]

Thank you for this video! I just finished up mine earlier today. The toughest part I found tricky was getting the new sensor back into the hole without bending the brake shield too much. Great guide!

[@MileHighCampers]

You are welcome, glad it helped you out. Getting the sensor in and out was tricky it took me a few tries as well!! Thanks for the positive feedback!!

[@JimJCCollins]

Very simple instructions. thank you

[@Dubyatrader]

Thanks for making such a comprehensive video!

[@MileHighCampers]

Your Welcome, glad the video was helpful!!

[@ColoradoMartini]

Hey I am looking for something to do at home. I will replace my sensor. LOL. Actually that is Patrick's job. And I do have a Jeep. Thank you for the love you have given our channel. It is appreciated. Stay safe, well, and sane. We are all in this together.

[@MileHighCampers]

Thanks for stopping by!! Staying sane thanks to several items purchased at the Liquor Store!! LOL Hope you all are doing well!!

[@thefireysoul]

My old sensor broke off flush so i had to drill it out and clean/vacuum out the hole before i could install the new sensor. Quite the learning experience. But it seems to have fixed the problem. Thank you for your video.

[@davidfarmerracing]

most vehicles with slide calipers, you can removed the caliper bracket and caliper as an assembly, saving a step

[@StupidEarthlings]

Awesome, thnx. Direct, to the point (no fckn off- No Jokes). ALL the pics/video needed, even showing where that clip plugs into, with the tab u must push to release. Great Video Sir.

[@joshnobles23]

Very thorough video man! Thanks so much

[@coryandpamela1]

You didn’t have take the caliper off the bracket. The 2 21mm bolts takes the whole thing off.

[@MileHighCampers]

Great feedback thanks for the tip!

[@sportdriver]

Yep 💯

[@robertseitz591]

So you're saying skip the caliper steps? Looking at doing this myself, although I don't want to have to have to bleed brakes and have 1 more step to screen up

[@markwarner8336]

Yes that's I was wondering if you could just undo the bracket bolts

If you wanna test with sensor is bad. I bought a Foxwell nt630 plus off Amazon. You can view live data of the wheel speed sensors while driving and see which one isn’t working properly.

[@Jflowboston1]

Great Vid, I'll do this tomorrow on my 2017 wrangler

[@MileHighCampers]

Thanks and good luck!

[@CraigNurmiSr]

This is great. Mine is the left front. I already made an appt at a shop but this looks very doable. My right turn signal went out last week as well. Bad ground. If I could pull that off, I could do this! Nice video.

[@ASvaleri]

hi successful working congratulations

[@fishingwithmd6489]

My brakes start grinding in the pedal then these lights come on when braking at low speeds sometimes my rotors are good and just replaced all the pads why is my jeep doing this

[@mafiadon1876]

Did you figure out what the problem was? Mine is doing the exact same thing

[@righthand2571]

Thanks man I’ve been driving with this issue for about a month now I know

[@MileHighCampers]

Thanks for watching and the great feedback, glad the video helped!

[@Malcolmkhaaliq]

Excellent! Thank you. 👍🏼

[@marvinduran7129]

Thanks for the details

[@mds1986ms]

These sensors almost never fail. Its a hall effect sensor theres nothing to fail. They either get dirty, theres a bad connection or a bad wire or a combination of those things but the sensor itself will never fail. What hsppens is the axel seal lets go and covers them in grease. Fix the seal and your troubles are over.

[@MileHighCampers]

Good information. In my case the wire going to the sensor was almost sheared in half.

[@mds1986ms]

Right ok. Now it mskes sense. Ignor my question in the other comment. Yeah i thought the way they had routed the wire was goofy so i reran it over the top and tucked more towards the hub this way its not getting hit when going over rough terrain and keeping it towards the hub keeps it from getting into the frame bumper.

[@MileHighCampers]

@@mds1986ms Your info is great and worth sharing, so it's all good, we are all about knowledge sharing and helping people, every situation can be different so I appreciate your perspective and comment!!

[@mds1986ms]

I do my best. I have a very extensive background as an industrial electrician and CNC technician but ive always tried to be a guy that knows a little bit about a lot. After awhile you realize everything is made from the same parts its all about application. From your tv or microwave to your car or your vacuum cleaner its all the same stuff just put together in a different order. Once you realize that its all down hill from there.

[@mds1986ms]

I shoukd start my own channel but i dont have my same charisma and witt when i know im being watched. I would need a cinema verite type thing going on. Maybe we can werner herzog to partner up. Lol. See im a damn nerd. Lol

[@mikimiki195]

Great video thanks

[@MileHighCampers]

Thanks for the great feedback!!

[@DaveJordan-m2i]

Is it OK to drive your jeep until you can get it repaired short term wise?

[@BrandLmedia]

AWSOME video, THANKS!!

[@markventura24]

Hey there! Before you replaced your wheel sensor assembly, did you get the ABS,TRACTION,HILL ASSIST intermitent lights pops in the dashboard? Let me know. However how is this parts treating you? Do you have any issues after replacing it? TIA.

[@MileHighCampers]

I just had the ABS and Traction Control lights coming on. I personally have had no issues since I replaced it. but all outcomes my vary...

[@markventura24]

@@MileHighCampers Thanks for the quick response man! Appreaciated it!! I also subscribed! 🙂

[@MileHighCampers]

Thank you! The sub is much appreciated!!

[@markventura24]

@@MileHighCampers I just want to let everybody know that wheel censors are connected to your wheel hub and if you go to any mechanic shop( not saying all). They are gonna want to say "ohhh we need to replace your wheel censor with the wheel hub because it is a full assembly. You need to diagnose the problem 1st by removing the tires and do a shake test on the wheel hub if there is or missing berrings. 2 shops was charging me $380 for the wheel hub + $200 labor for 2 hour job. Instead i did it myself and it cost me $18 for just the wheel censor. Lolll saved myself $$$ of course Thanks for your very good video!!!

[@djbigton5761]

How did you determine which one to change?

[@GingerlesSoul]

You have to have the codes read. Auto parts stores can't do it for you. They can only read check engine lights. I took my Jeep to a buddy who works at a dealership and he ran it for free. Otherwise, you'll have to pay for it and it can run $70-$170 just to get them read.

[@shaynelhta]

i went to change the front right on my jeep today and had some issues: first, the new sensor is about 5/16" longer than the oem one. It will not fit. I have to wait for the dealer to open tomorrow to see if I can get one the matches the original. the Autozone and napa did not work for me. Second, if you only take off the 21mm bolts you can pull caliper and rotor off together. Its alot easier.

[@MileHighCampers]

Great tip, thanks for sharing!!

[@shaynelhta]

@@MileHighCampers just a follow up: Come to find out my 80k mile jeep has aftermarket hub assembly. I had to replace the whole hub to get it to work...

[@candylove3837]

My break light is on as well along with the abs and the traction control could that be part of the problem or is the break light on another issue?? Help Please I’m a girl here going crazy and scared I will have to pay a big bill 😭😭😭😭

[@MileHighCampers]

It's possible that the break light being on is unrelated... however, I do not know for sure. I would check with your local Jeep Service Center to see if they would do a free diagnostics on it.

[@8v609]

My sensor light comes on only on reverse but just for a second or two,wondering if yours was on all the time?

[@MileHighCampers]

The lights on the dash came on sporadically, sometimes I could go a few days without it coming on, than it would blink or stay on for a few days. When I got the old sensor off I inspected the cable and it was fraying in one spot (Forgot to include that in the video) so it must have been shorting out randomly.

[@johnstecz9169]

How do you get the dash board lights to go off after fixing the sensor?

[@MileHighCampers]

Disconnecting the battery for a few hours and reconnecting sometimes works in these cases, or you can use a hand held scanner to reset it.

[@ofsoundmind2687]

This is the way..... I see ya bro

[@MileHighCampers]

Glad it helped!

[@VacationHomeThemes]

Was it just the light coming off and on or did you notice any braking or other issues?

[@MileHighCampers]

It was intermittent, as a matter of fact it wasn't even on when I took it to the dealer to get the final diagnosis .

[@javierandresvelez-martinez4759]

Is there any programing that needs to be done? My right rear speed sensor broke and I got all the lights on, took it to the dealer and they diagnosed and took care of it (very expensive). Then a week after the left front sensor broke, they diagnosed it free of charge but said that if I wanted to change it I would have to "have an expert program it", don't know if they were bluffing but I have the part ready to install just hesitant because of this.

[@MileHighCampers]

That is interesting... not sure about that, I suppose maybe newer models need programming, but I did not need to re program anything when I did mine... not sure who you could check with to verify that aside from a Jeep mechanic that might not be affiliated with the dealer... sorry I could not be more help.

[@rdpancake]

fist off good video, the only problem i had with it is you disassemble your caliper for some reason , just take the bolts off thats holding you caliper on and your done. only 3 bolts need to be removed and you remo 5 JUST SAYING

[@MileHighCampers]

Thanks for sharing the tip!

[@RK-qc6fo]

Hi, how do you know if its front or rear sensor to be replaced? As well as right or left? Any errors?

[@MileHighCampers]

Unfortunately I had to take it to the dealer to get the front left sensor information. There are scanners that you can buy that show ABS and traction control information, but my scanner is not equipped with those features, so taking it to the dealer was my only option. They did not charge me to hook it up to their scanner so I did get lucky there.

[@jellosmello]

My check engine light came on and I took it to my mechanic and he was able to tell me it was my front passenger sensor. Bought the cable and did it myself!

[@thatcoffeefella]

Turn key 3 times to check for errors. Google error codes for the Jeep.

[@awolarn8016]

I had the same problem but found that if you cycle the key 3 times, the error code displays where the Eco mode in the right display is. Mine was U1417 so left side speed sensor. Saw another channel that said if the trip odometer and mpg are calculating half what they should be, it's the rear one. Mine are normal so I'm going to replace the front sensor. Thanks for a quick informative video so I know what I'm getting into. Cheers!

[@cosme2032]

I replaced all 4, crankshaft sensors & camshaft sensor. Still having tc light come on. Jeepneeds to fix this problem! It's an off road vehicle.

[@MileHighCampers]

I'm sorry to hear you are still having issues. From what I understand there can be other underlying issues that can cause the can cause the sensor code to display. You may want to see if you can get a free diagnostic from a dealer to see if they can isolate the issue.

[@bonniej2609]

Steering wheel alignment? The drags get off center and cause some issues

[@muriel104]

The sensor location is only in the driver side?

[@MileHighCampers]

I believe there is a sensor on each wheel... my issue was on the passenger side.

[@muriel104]

Thk for you time.

[@automatichange9453]

Do you need to bleed the brakes for this?

[@chrisreyes-ts7yp]

How many abs sensor are they in total?

[@billfelix9061]

This video helped me tremendously, thank you, B i l l

[@sandymitchell8182]

Awesome video. I have some question for the Jeep folks I hope someone will help me with.2009 JK 6spd manual,2 door, every Light is on ABS,BRAKES,TRACTION CONTROL, Etc, #1 If my jeep has ABS is there a special sensor for that?? like non ABS sensor/ with ABS sensor ? mine has ABS. # 2 after Install do I need to reprogram anything or do the lights go off on their own? # after replacing could there be another problem beside the sensor? tpms?? I did take it to a mechanic and he told me my battery was not strong enough to get a proper reading on which sensors it could be, but that one or two were bad...live in a rural area with not many people with the proper computer to diagnose. thanks in advance

[@MileHighCampers]

Thanks for the good feedback and the comment! In the past I have experienced issues with a Jeep Cherokee that if the battery was not perfect it had all kinds of problems and changing the battery fixed everything, but I'm not sure if that happens with JK's as well, I have never had that issue with this Jeep. I would trying charging the battery and see if you notice any change after the charge...

[@sandymitchell8182]

@@MileHighCampers I did its a red top optima, didn't change anything. did you have to buy sensor for abs? is my question

[@brandonghostdogdintelman5845]

My traction control light comes on and blinks and goes away. Repeats until I turn off engine. Should I have it looked at? 2015 wrangler willys

[@MileHighCampers]

My light was intermittent as well, probably wouldn't hurt to check with the dealer to see if they can do a free diagnostic on it. My local dealer ran their scanner on it for free.

[@titanpro66]

Wish my dealer did that they where charging me 200 dollars for a diagnostic and had to schedule a appointment for it 🤷🏽‍♂️ but did it my self no luck abs and traction control still on

[@sparksb4252]

what was the issue? i’m currently dealing with the same, it quickly goes on and then off . Sometimes the brake lights comes out too

[@Thel2552]

Did this cause shifting problems?

[@Thel2552]

Does each wheel have a sensor?

[@scubad3170]

yes

[@letstalktruecrime01]

is this the same as a jeep patriot? my 2016 has the same issue.

[@MileHighCampers]

Unfortunately I don't know, sorry I couldn't be more help.

[@letstalktruecrime01]

@@MileHighCampers thanks anyway, i found the problem and it was fixed pretty easily.

[@00corin00]

How much for the plug? Thanks.

[@MileHighCampers]

The sensor runs about $16 on Amazon: amzn.to/32eethL

[@mightyhealthy8227]

How to reset abs

[@DaviddoesStuff]

That turned out well. 👍🏻👍🏻 Could you see any physical damage on the old sensor?

[@MileHighCampers]

You know I thought about including that in the video... I want to respect everyone's time so I struggle making my DIY videos sometimes because I try to include as much important info as I can but keep the video moving as quickly as possible... To answer your question, Yes! I found a spot on the wire that had worn down thru the rubber and frayed the wire inside. Which makes sense because this was an intermittent problem so my hunch is every time it was making contact with metal, it was probably shorting, causing the lights to come on! Thanks for the great question and for watching!!

[@DaviddoesStuff]

Mile High Campers LOL it’s definitely a struggle to find a balance when making a video. My first videos had terrible audio and I’ve about got that lined out for the most part. I tend to listen more than I watch so the DIY stuff that’s all text doesn’t cut it for me. If it’s something I really really need to know I’ll set aside time to actually watch but that’s rare. Have a great day.

[@MileHighCampers]

I listen mostly as well, and I usually look for videos that are over 20 min long so I don't have to keep looking for a new video on a topic. Needless to say my early videos were tooo looong because I went into it assuming people liked long videos, but I have sense been trying to keep it compact and jammed packed with as much good info as possible, LOL

[@DaviddoesStuff]

Mile High Campers I think you’re doing a great job. Have a fabulous day!!

[@mds1986ms]

But wait what was the sensor rubbing on in the first place? There shouldnt be anything in there for it to rub on.

[@georgesadventures6585]

Hey I hit 3000 rpm’s and my traction control light comes on then I can’t go above 3000 rpm’s after that you think my speed sensors could cause that

[@robertozamora8901]

Did you find a solution? Having the same issue might be oil pump or solenoid valve

[@LivingTheGoodLifeRving]

👍

[@MileHighCampers]

Thanks for watching!!

[@JesusUnsheathed_ItIsWritten]

Replaced front left and code lights still on, 🤦‍♂️🤷

[@peonerw]

how many are on a jeep? wifes comes on and off randomly

[@MileHighCampers]

I believe one on each wheel.

[@gerardonunez9847]

Anybody had code p1731?

[@specialk864]

why does, absolutely, every video neglect to explain how to go about turning the Traction Control and ABS lights off, after part replacement is complete?!? like, seriously... every SINGLE video!?!

[@genelee4160]

That's because it'll go out by itself once the computer reads the sensor for a unspecified time with no fault

[@josephantiskay3663]

Well done,,,I have to do mine next 🫨